Without good grip tape, skaters have a tough time staying on top of their board. The main complaints about poor grip tape tend to be that it was never very grippy or lost its grip really quickly. Once again, we recommend trusting in name brands with years of experience supporting skateboarders. Unfortunately, if you are buying a pre-made complete skateboard, you probably won't have access to the brand name of the grip. 
Ancheer 31″ Pro Skateboards are made of 7-ply maple wood and finished with anti-slip grip tape.  It includes 60mm PU wheels ideal for riders who want to carve out sections, obtain speed and higher off the ground for tricks. It features 6″ Tony Hawk Signature aluminum trucks and 32″ long deck with double kick tail which is ideal for perfecting your favorite tricks.  It comes with ABEC-7 skateboard bearings.  It has style and quality which is expected from the most influential skateboarders of all time.  It is one of the best-rated skateboards on Amazon with a rating of 4.8.
If what you want is the classic skate park skateboard that you see teens riding around all day, the MINORITY is the board for you. This is an extremely sturdy and durable board that can hold up to 220 pounds, and is made for trick riding especially. The strong trucks, medium concave shape, and high-rebound bushing all make this a fantastic board for ramps, pools, and street riding.
We have unfortunately seen low quality skateboards that even try to use plastic trucks (please avoid). However it can be really hard to spot a poorly made metal truck without skating it. Brand awareness can come into play here again. The manufacturers name should be marked on the trucks. A quality set of trucks (2 per board) could start out as low as around $30 and will go up from there. 
In the early 1970s skateparks hadn't been invented yet, so skateboarders would flock and skateboard in such urban places as The Escondido reservoir in San Diego, California. Skateboarding magazine would publish the location and Skateboarders made up nicknames for each location such as the Tea Bowl, the Fruit Bowl, Bellagio, the Rabbit Hole, Bird Bath, the Egg Bowl, Upland Pool and the Sewer Slide. Some of the development concepts in the terrain of skateparks were actually taken from the Escondido reservoir.[27][28][29] Many companies started to manufacture trucks (axles) specially designed for skateboarding, reached in 1976 by Tracker Trucks. As the equipment became more maneuverable, the decks started to get wider, reaching widths of 10 inches (250 mm) and over, thus giving the skateboarder even more control. A banana board is a skinny, flexible skateboard made of polypropylene with ribs on the underside for structural support. These were very popular during the mid-1970s and were available in a myriad of colors, bright yellow probably being the most memorable, hence the name.
Of course, 2015 also stands for a line of new companies that drew a lot of attention on them and we are talking about some serious game-changers here. There was Sour Skateboards, who had an incredible launch (or are we talking of a comeback?) as well as Isle Skateboards (did you hear about the Bright European Skateboarding Awards 2016?), Krooked and many more. We are hyped for this year and can’t wait to explore whatever there is to come with all of you guys! We would love to know your opinion. Which are your favorite deck brands. Feel free to comment below.
'90s nostalgia is the name of the game. VHS tapes. Grimey hip-hop. Drinking forties, smoking blunts, skating filthy street spots at night, and general hooliganism are cornerstones of skateboarding's mid-90s golden years, and Palace is all about that life. No wonder you see the tees and skate decks stocked at Supreme, the only brand that compares to Palace when it comes to nailing that “fuck it” aesthetic. Palace gear has been causing an uproar lately—yes, Palace was on that designer parody tee shit before everyone else, and yes, the collab with Umbro was one of the best we've seen in years—but make no mistake the brand is skate to the core, and no amount of hype will change that. Let's hope, anyway.
Next, you’ll need to look at the deck material. Decks are typically wooden or plastic, but they may also be made of materials like carbon and fiberglass. Plastic boards, like the pennyboard, are more affordable, and still very durable, but many adult riders find that they can look a bit like a child’s toy rather than a “real” skateboard. Wood is the most popular choice for most skateboards, although if you want to invest in the pricier fiberglass or carbon options, you’ll get a very good quality deck for your money.
The nose and tail of a standard skateboard curve upward slightly to make tricks easier to perform. On most decks, the nose and tail are shaped slightly different. The nose is usually wider, longer and steeper than the tail which aids in nose-based (nollie) tricks, and also helps you differentiate the nose from the tail. Some shaped boards have very different nose and tail dimensions, and some old school boards lack noses all together.
Bearings are standardized to fit in all kinds of skateboard wheels. All bearings will eventually get dirt and gunk in them which slows you down. Regular cleaning is recommended. Higher quality bearings will perform better, roll faster, retain more speed, and last longer when cleaned regularly. Some bearings come with bearing spacers or have spacers built into the bearing. These will fit in any wheel, but are not necessary for most types of skateboarding or longboarding.
Regardless of the length of these boards, they each have several components in common that include a deck, grip tape, trucks, and wheels. The deck is the actual surface piece of the board on which a rider stands to perform tricks or control their degree of motion. Decks range between seven and ten inches in width and although seven-ply wood is the most common material for them, they can also be crafted out of bamboo, carbon fiber, and even plastic. Decks are shaped in several unique concave designs, which include radial, progressive, W-concave, tub, and asymmetric. Radial concave decks have U-shaped curves and are ideal for beginners, as they provide one's feet with a reliable grip.
After numerous tour-based releases and the epic Lakai footwear video ‘Fully Flared‘ (2007), Girl Skateboard’s last (to date) full-length company release came in the form of ‘Pretty Sweet‘ (2012) which, aside from showcasing ground-breaking skateboarding, also set a new standard in terms of production values with Ty Evans employing cinematic camera technologies to capture the skateboarding, as well as the skits.
As the name implies, pro skateboard decks are decks made by well-known skateboard brands that typically feature graphics or logos related to a specific team rider.  Usually, pro decks are more expensive than team decks of the brand and much more expensive than blank decks.  The increased cost goes to the pro skater and it’s a way for the buyer to support their favorite skaters and brands.  Pro street decks are almost always Canadian maple, besides a few carbon fiber exceptions and they are the most commonly purchased decks see in skateparks and on the streets worldwide.
Severe injuries are relatively rare.[103] Commonly, a skateboarder who falls suffers from scrapes, cuts, bruises, and sprains.[103] Among injuries reported to a hospital, about half involve broken bones, usually the long bones in the leg or arm.[102] One-third of skateboarders with reported injuries are very new to the sport, having started skating within one week of the injury.[102] Although less common, involving 3.5–9 percent of reported injuries, traumatic head injuries and death are possible severe outcomes.[102]
Many musicians, painters and designers have explored their potentials through skateboarding. When you skate, your inner talents come out in many ways. Painters paint their decks with artistic sceneries and musicians sing while they are deeply involved in cruising through the smooth roads. People with graphic designing and photography passion bring out their skills by taking an incredible picture while skateboarding and edit them beautifully. Skateboarding no doubt polishes your skills!
Modern decks are made with a composite of thin layers of either maple or bamboo pressed into a near symmetrical shape with a nose equal to or longer than the tail. The deck should be concave (subtle U shape) along the whole board with both the nose and tail angled upwards (the "kick" of the board). Conceptually while the skateboard is a platform, it also serves to cup the balls of the skater’s feet with rising sides, nose and tail providing the foundation for pretty much all modern skateboard tricks.
Emerging initially via a series of spoof news bulletins created by Lev Tanju called ‘PWBC Global Skateboard News‘ and hosted on the don’twatchthat.tv site, the aesthetic that the Palace Skateboards Brand would adopt was firmly established in these early videos. Sadly now mostly deleted from the Internet, aside from a few ‘best of’ videos, the PWBC News series were a pre-cursor for the route that the brand would adopt with its comedic take on the faux-seriousness of the Skateboard Industry of the time, an emphasis on the UK grime music scene, and the introduction of numerous characters within each news segment, including Francis Shower Face who still appears in Palace releases to this day, along with snippets of footage from various sources.
A 100% genuine Penny board. It is a complete skateboard featuring classic design. Its design reference comes from 1970s boards. It replicates the retro era skateboard. Its small size makes it an ideal cruiser providing you with ease of using it anywhere. Whether commuting to your school or surfing along with friends, Penny Complete Skateboard provides a smooth ride. It is lightweight and easy to carry around as well. It can easily bear heavy weight and will not give in. You can easily master your skateboarding skills and become a pro using genuine Penny Australia Classic Complete Skateboard.

Founded in 2008 in Pennsylvania, Punisher’s goal has been to make graphically pleasing skateboards that have designs that resonate with the rider on a deeper level. Each artist is handpicked by Punisher to design an original, unique image that is then incorporated into the skateboard. The fantastic graphic designs combined with the quality of the skateboard itself make for a very personalized riding experience.


Longboards are often 8 to 12 inches longer than a standard skateboard. That added length makes them more stable for long rides or high speed downhill runs. Available in a huge variety of shapes, sizes, and truck mounting options, longboards are highly customizable for many types of riding. If you want to push long distances, skate fast down hills, or are a beginner looking for an easy board for learning to balance, check our Guide to Longboarding for more info.
If Supreme wasn’t featured on this list, we might get a long list of hate in the comments, but I’m not adding it just to satisfy the hypebeasts. Over the past few years, what was previously dismissed as a brand that catered mostly to resellers has once again gained a spot at the forefront of what is important in skateboarding today. With the release of cherry in 2014, Supreme showed the world that they haven’t forgotten their roots, and reminded us they will always be a skateboard company first and foremost.
After leaving long time sponsor Birdhouse due to a feeling of dissatisfaction at the manner in which he himself was being marketed as a pro skater, Andrew Reynolds joined forces with a group of similarly aged pro skaters, who at the time, all lived close to each other in Huntington Beach, California in the Warner Ave housing complex and resolved to turn what had formerly been a loosely affiliated crew into a skateboard brand. Reynolds approached Tony Hawk and Per Welinder, owners of Blitz Distribution (and distributors of Birdhouse) with his idea and, rather than losing Reynolds completely, Blitz Distribution agreed to assist Reynolds with Baker and to distribute it.
×