Taotao Girls Skateboards comply to United State Consumer Product Safety Commission (CPSC) Standard.  It has a 24″ X 6″ Maple Double Kickside Deck. It features 608Z Bearings, 3.5″ Plastic Truck & Base, and 50 x 30 mm PVC Wheels.  The Safety helmet, Knee and  Elbow Pads also comply to CPSC Standard.  It has a Cool Pink Aloha Graphic Design with an Amazon rating of 4.3.

The Quest can be considered as the best improving Longboard brand because in 2014 it was in the 4th position, whereas in 2018 it is in 2nd place. This is a good improvement for a Longboard brand in these competitive days! Even though it is now in 2nd place, it has a little gap with Sector 9. They mainly focused on the customer’s needs by collecting client opinions. They have been improving the size, quality, performance, speed, design, and color of their longboards.
Grip tape adds additional assurance for a rider's feet. It is made from a sheet of colored paper or fabric with adhesive on one side and a fine, sand paper surface on the other. Applied to the top surface of a skateboard, grip tape gives a person's feet an improved grip while maintaining stability for performing tricks. Skateboard trucks connect both the wheels and ball bearings to the deck and are directly attached to the deck themselves. They are usually constructed from aluminum alloy. The wheels are mounted to their axles via steel bearings. The wheels are made from polyurethane and available in a range of different shapes and sizes to suit most any skill level.
A skateboard is fundamentally a sum of its parts. If you want a good skateboard, you’ll want each component to be high quality. We’ll take a look at each part of a skateboard and talk about what quality means for the that component. We’ll try to give tips on how to spot a high or low quality implementation of that component and then we’ll share how SkateXS Skateboards measure up.  
It’s best to not go overboard with spending a lot of cash on your first skateboard. After all, it will take a lot of beating, and will surely be reduced to looking like a scratched plank of wood! Best skateboards to learn on include budget, beginner skateboards that offer you all the quality features a more expensive skateboard would, but at a lower expense. If you are new to skateboarding, it’s also recommended to get a skateboard with smaller wheels, since they go slower and are less intimidating!
Skateboards just aren’t what they used to be, and that doesn’t make Jim Greco, Baker and Deathwish OG, happy whatsoever. Greco started the company last year as an effort to bring back skateboard manufacturing to the USA from overseas in China, using the traditional silk screen ink transfer and hand shaping methods from the early days of skateboarding.

Element, based out of Irvine, CA, is one of the cool skateboard brands today. They came in first on our list due to their quality boards, sustainable practices and the affordability they offer customers. They’re an environmentally responsible brand who creates their boards without causing any environmental damage. The Element team behind the company is comprised of a group of professional skateboarders who interact with a strong belief in the Element brand. They not only offer great products, but stand for an open minded and active lifestyle and have become one of the best skateboard brands in the world.


However, the diversity of Santa Cruz skateboard’s stake in the skateboard business meant that they easily survived the mid-90’s slump in popularity and returned with an newly invigorated team and powered on with video after video from the mid-90’s to the present day. Similarly to Powell-Peralta, Santa Cruz are also notable for their Veteran Division (documented in their 2007 release ‘V Day‘) celebrating pro riders such as Keith Meek, Tom Knox and Eric Dressen from earlier eras of Santa Cruz’s existence. Santa Cruz Skateboards current line of product boasts many re-released classic boards from earlier eras of the brand and are as popular, if not more so, than they were originally, thanks to an explosion in the nostalgia and collector’s markets within skateboarding.
The growth of the sport during this period can also be seen in sales figures for Makaha, which quoted $10 million worth of board sales between 1963 and 1965 (Weyland, 2002:28). By 1966 a variety of sources began to claim that skateboarding was dangerous, resulting in shops being reluctant to sell them, and parents being reluctant to buy them. In 1966 sales had dropped significantly (ibid) and Skateboarder Magazine had stopped publication. The popularity of skateboarding dropped and remained low until the early 1970s.[7][25][26]
“As far as the actual look of the vast majority of contemporary graphics goes, I’d say that it feels to me as if something has been lost. It’s down to what you can do with modern heat transfer printing techniques – you can literally just take a photograph from the Internet and print it identically straight onto a skateboard. Speaking personally, there’s very little to challenge you there: either from the point of view of creating graphics, or from the consumer’s perspective. Whereas back when screen-printing was the norm, every time a graphic was produced the artist was physically cutting the key line out by hand. The key line is the final black line that forms the outline of whatever it is that you’re printing and ties in all the other colours together. You can see this in the early Sean Cliver graphics for example, where it’s clear that he has hand cut the key lines as precisely as he was able to, but looked at from today’s perspective they’re not perfectly precise, which is what gives Cliver’s earliest stuff its specific look in my opinion.”
Jump up ^ Williamson, Elizabeth (October 11, 2013). "Skateboarders See a (Kick) Flip Side to the Government Closing: With Washington Plazas Empty and Patrols Down, a Banned Sport Is Suddenly On" (video). The Wall Street Journal, U.S. Edition. Retrieved March 30, 2017. One positive thing about the gov't shutdown – spots at gov't buildings are now skateable – Darren Harper, Pro Skateboarder, via Facebook.
It’s best to not go overboard with spending a lot of cash on your first skateboard. After all, it will take a lot of beating, and will surely be reduced to looking like a scratched plank of wood! Best skateboards to learn on include budget, beginner skateboards that offer you all the quality features a more expensive skateboard would, but at a lower expense. If you are new to skateboarding, it’s also recommended to get a skateboard with smaller wheels, since they go slower and are less intimidating!
Skateboarding during the 1990s became dominated by street skateboarding. Most boards are about 7 1⁄4 to 8 inches (180 to 200 mm) wide and 30 to 32 inches (760 to 810 mm) long. The wheels are made of an extremely hard polyurethane, with hardness (durometer) approximately 99A. The wheel sizes are relatively small so that the boards are lighter, and the wheels' inertia is overcome quicker, thus making tricks more manageable. Board styles have changed dramatically since the 1970s but have remained mostly alike since the mid-1990s. The contemporary shape of the skateboard is derived from the freestyle boards of the 1980s with a largely symmetrical shape and relatively narrow width. This form had become standard by the mid '90s.[42]
Founded by the original technical street skaters Daewon Song and Rodney Mullen, Almost Skateboards always pushes the envelope with fun, artistic cartoon graphics paired with high quality materials.  Almost was one of the first brands to implement carbon fiber layers to their decks in the “Impact” deck line to increase the deck’s life and better maintain its shape.
×