The Golden Dragon is a fantastic board for beginners, and it’s all in the wheels. The high-rebound polyurethane wheels are hand-cast and offer amazing grip as you ride, plus fantastic roll. The deck itself is just slightly longer than a standard skateboard, which offers a bit more stability for beginners, who might be worried about sliding or slipping off a shorter board. Additionally, this board features the All Powell-Peralta Ligament strap, an important safety feature that keeps the deck together if it should break. This helps prevent injury and provides a little more peace of mind for the rider.
Minority Maple Skateboard is an aesthetically engineered, quality starter skateboard. It is solid to the core. It is made with 7-ply hard rock maple cold pressed into 32×8-inch deck. It is built to endure weight up to 220 lbs. Its mediate concave design makes it perfect for performing tricks with ease and dexterity. Its 5-inch long trucks made with genuine aluminum alloy makes it an epitome of strength and endurance. Its carbon steel kingpin and 78A high rebound PU bushing adds to its strength. ABEC-9 precision bearings are manufactured using chrome steel with 52mm 102A PU wheels making the Minority Maple Skateboard a speedster.
Proper skateboard wheels are made out of polyurethane with minimal additives. Toy skateboard wheels can be made of plastic or a low quality poly mix which leads to poor performance in the best case and even outright dangerous situations with cracked wheels in the worst case. This is a case where brand recognition and reputation can come into play. 
Bearings are rated by the ABEC scale (1-9), which has nothing to do with skateboarding. Manufacturers know skaters believe higher ABEC ratings mean faster bearings. They do not, and you won’t find high-quality bearings on off-the-shelf skateboards. Most of these completes are slow. Make a bearing upgrade a top priority. Good bearings can make almost any skateboard fast. This article by longtime pro Anthony Pappalardo gives an insider’s perspective on bearings.
Founded in 1994, and going strong ever since, Globe is one of the top quality skateboard brands in the world. They are a global producer and distributor of skateboards and skateboarding gear; selling products in over 100 countries. This is the best brand of skateboard. They are known for their purpose-built apparel, skateboard decks, trucks, wheels, etc, footwear and major surfing and skateboarding events (just to name a few of their ventures). Due to their presence in the boarding industry, Globe has gradually become one of the best skateboard brands in the market.
Graphically speaking, Welcome is very distinctive, with an emphasis on hand drawn imagery and references to esoteric and occult themes mixed with bright colourways. Welcome Skateboards also offer a detailed shape guide on their website, detailing the exact dimensions of all of their 38 custom shapes, which again differentiates their product from many of the skateboard brands on the market.
Another bonus of shopping at an actual skate shop is that you get to see what the boards look like in person. Most skate shops will have a cool wall of boards, and it's fun to just stand there and look at all the graphics. If one jumps out and grabs you, then you can ask the shop owner about the brand, and whether it's a good one. There's nothing wrong at all with buying a skateboard deck because you like the graphics!
Modern decks are made with a composite of thin layers of either maple or bamboo pressed into a near symmetrical shape with a nose equal to or longer than the tail. The deck should be concave (subtle U shape) along the whole board with both the nose and tail angled upwards (the "kick" of the board). Conceptually while the skateboard is a platform, it also serves to cup the balls of the skater’s feet with rising sides, nose and tail providing the foundation for pretty much all modern skateboard tricks.
Sizing plays an important role in the performance of any deck. A large majority range in size from 7.75" to 8.5" in width. These will provide a great platform for shredding any obstacle and will excel in street and skatepark environments alike. For those who prefer a smaller board, decks are offered down to 7.5" in width- benefiting people with smaller feet or the technical skater. Conversely, those looking for a wider board will enjoy our selection ranging up to 8.9" wide. Larger decks will accommodate those with very large feet, as well as offer an amazing experience for cruising and shredding large ramps and transitions.
Longboards are often 8 to 12 inches longer than a standard skateboard. That added length makes them more stable for long rides or high speed downhill runs. Available in a huge variety of shapes, sizes, and truck mounting options, longboards are highly customizable for many types of riding. If you want to push long distances, skate fast down hills, or are a beginner looking for an easy board for learning to balance, check our Guide to Longboarding for more info.
“As far as the actual look of the vast majority of contemporary graphics goes, I’d say that it feels to me as if something has been lost. It’s down to what you can do with modern heat transfer printing techniques – you can literally just take a photograph from the Internet and print it identically straight onto a skateboard. Speaking personally, there’s very little to challenge you there: either from the point of view of creating graphics, or from the consumer’s perspective. Whereas back when screen-printing was the norm, every time a graphic was produced the artist was physically cutting the key line out by hand. The key line is the final black line that forms the outline of whatever it is that you’re printing and ties in all the other colours together. You can see this in the early Sean Cliver graphics for example, where it’s clear that he has hand cut the key lines as precisely as he was able to, but looked at from today’s perspective they’re not perfectly precise, which is what gives Cliver’s earliest stuff its specific look in my opinion.”

Krux make some great trucks. Krux makes "downlows" trucks, that have a lower hanger and kingpin than even Grind King. However, you will need a hex tool to adjust them. The Krux IIIs with Topless System are even lighter, with special bushings that feel broken in from the start, but that also provide a faster snap back into position. Krux trucks are light and low.
In the skateboarding world, there is considerable shuffling of the famous top brands as not many of them manage to stay in the spotlight for long. This continuous reshuffling paves way for new skateboard brands to come into the spotlight. However, it is important to note that no two brands are the same and comparing them is difficult but the following list has been created by extensive research of the saturated skateboard market and features the best skateboard brands out there that you must give a try. 

This board is also a very smooth ride, and surprisingly offers plenty of stability as well, which makes it safe for beginners to learn with. Finally, it’s one of the few boards on this list that comes in a huge array of styles and artwork so that you can get the board that suits your style best. If what you want is a board that looks and performs like the boards you see at sporting events, this is the perfect choice. The only downside is that it’s not the most flexible board out there, which could make it a little harder to ease into turns – however, this feature is what makes the board just right for learning tricks on.
With Board Blazers LED Cheap Skateboards, you can quickly customize your ride.  There’s no need for any bulky battery pack or wires.  You just need to place the lights under the trucks to do the tricks.  Now, you can cruise safely with style.  It is self-adhesive and every light comes with small, long-lasting, and easily replaceable lithium batteries.  The on/off activation is controlled manually. It includes a set of 4 lights with the matching color.  It is best for all types skateboards, longboards, and scooters. It is the perfect gift for anyone.  It is the most trusted product with a rating of 4.5 on Amazon.
Great option for a beginner who wants a pro deck and doesn’t mind non-pro branded parts.  Enjoi is very well known by skateboarders and the panda logo will be recognized everywhere.  This particular deck is 7.75″ wide which is why I think it’s the best as it can be skater by any size person comfortably.  One slight downside to this setup is that the board comes unassembled, however many skaters enjoy putting together their own skateboards and it can be done in just a few minutes by following a YouTube video.  You won’t go wrong with such a well-respected brand and average size, this is actually the exact skateboard I decided to buy for my nephew a few years ago and he absolutely loved it!

They are also budget friendly when you compare their features and capabilities. The latest technology of developing created a new groundwork in the world of skates. That way the new skaters can quickly learn how to become better and how to practice for professional tournaments. It is widely popular, and that is the main reason why you will see at least one Alien skateboard in any skate park in the world.


Skateboarder owned and operated is Magenta's mantra. “No middle-man or business-person involved,” it says on the brand's site, so you know what you're getting from this French brand is pure, uncut skate to the core. All of the art direction and graphics are done by co-founder and team rider Soy Panday, who has developed a unique artistic perspective for Magenta. You'll likely to see numerous skaters kicking around on Magenta boards in NYC these days, and with a strong offering of T-shirts, coaches jackets, caps, and a funny boxer short collab with Lousy Livin, there is plenty to appreciate.
As the oldest brand on this list, Santa Cruz rightly holds the distinction of being the oldest skateboard brand in the industry and thus, the brand which effectively created the modern skateboard brand as we know it today. Founded as part of NHS Inc. a Santa Cruz based skateboard distribution company over 40 year ago, Santa Cruz as a brand has played a large part in every era of skateboarding history since its inception.
The best criticism you could make about skateboarding in general right now is that it takes itself too seriously. Rightfully so. Skateboarders are often under attack, and what they do is illegal in most places. Skate culture is constantly being ripped off and bastardized. That's why it's so important to have a healthy sense of humor about it all, and that's why it's important that skateboarding has Roger.
7.12"7.25"7.3"7.5"7.56"7.62"7.7"7.75"7.8"7.81"7.87"7.875"7.88"7.9"8"8.02"8.06"8.1"8.12"8.125"8.13"8.18"8.19"8.2"8.25"8.27"8.28"8.28"8.3"8.31"8.32"8.35"8.37"8.375"8.38"8.4"8.44"8.45"8.47"8.5"8.55"8.6"8.62"8.63"8.67"8.68"8.7"8.75"8.8"8.87"8.88"8.9"8.948.989"9.05"9.1"9.12"9.13"9.16"9.18"9.2"9.25"9.265"9.3"9.31"9.32"9.37"9.375"9.38"9.4"9.42"9.5"9.56"9.57"9.6"9.62"9.625"9.739.75"9.78"9.8"9.81"9.849.85"9.87"9.875"9.89"9.9"9.97"9.9810"10.1"10.2"10.25"10.34"10.37"10.5"11.2"11.75"
I'm 31 years old and just started skateboarding for the first time I bought a creature because of the p2 kevlar veneer they throw in before the final veneer goes on plus the nose is a little less tapered then the tail making it slightly bigger but the pop I get or the spring is nutty you can feel the board torgue up power in the tail just before you launch very happy with my puchase salvatore rochester ny
In the early 1970s skateparks hadn't been invented yet, so skateboarders would flock and skateboard in such urban places as The Escondido reservoir in San Diego, California. Skateboarding magazine would publish the location and Skateboarders made up nicknames for each location such as the Tea Bowl, the Fruit Bowl, Bellagio, the Rabbit Hole, Bird Bath, the Egg Bowl, Upland Pool and the Sewer Slide. Some of the development concepts in the terrain of skateparks were actually taken from the Escondido reservoir.[27][28][29] Many companies started to manufacture trucks (axles) specially designed for skateboarding, reached in 1976 by Tracker Trucks. As the equipment became more maneuverable, the decks started to get wider, reaching widths of 10 inches (250 mm) and over, thus giving the skateboarder even more control. A banana board is a skinny, flexible skateboard made of polypropylene with ribs on the underside for structural support. These were very popular during the mid-1970s and were available in a myriad of colors, bright yellow probably being the most memorable, hence the name.

Ever notice small vertical or horizontal cracks through your grip tape or by the hardware of your trucks?  These are called stress or pressure cracks and are basically mini fractures of your skateboard deck that typically are seen in the areas of the deck that withstand the greatest impact (around the trucks).  A few pressure cracks is generally no big deal and you won’t even notice them while skating, but they can compound and grow larger and make your deck lose “pop” and increase the chance of snapping.  To avoid pressure cracks, you cant use riser pads underneath your trucks to reduce the level of impact your deck takes.  You should also avoid over tightening your hardware and storing your skateboard in a very humid place as both of these practices can also make your board weaker and more susceptible to pressure cracks.

Started by a group of guys who decided to stick together after the fall of Alien Workshop, Quasi skateboards presses boards and prints shirts featuring psychedelic art for the year 2015, offering something different than most board brands today. Backed by a team boasting hometown heroes and certified style gawds, Quasi is a board company everybody wanted that nobody had made yet.


Velocity Boards Retro Skateboards is a complete 22″ Banana Skateboard.  It includes 6″ Lightweight Aluminum Trucks, High-Speed ABEC-7 Bearings, High-Quality Wheels & Bushings and Hardware.  It has a Unique Textured Waffle Pattern on Deck and is designed for Maximum Grip.  The Deck measures about 22 x 6 x 4″.  It has a 6″ Truck Axle and a 3″ Truck Hanger.  It has a maximum weight capacity of  176 lbs. (80 kgs.).  It is great for all skaters who are 6 years old and above.  It has an Amazon rating of 4.7.
First, you’ll need to consider the size of the skateboard. Most skateboards are about eight inches wide, but if you have very large feet, or you really want to feel very stable as you learn, consider going with something wider. Remember that the wider you go, the harder it is to learn tricks and to go around curves. If you want to rotate your board mid-air during a jump, you need a board that is no wider than eight inches.
Powell has made sure to provide their customers with more than one design of one of their most sought-after skateboards. The Golden Dragon 2 is very similar to its predecessor, the Golden Dragon and is just as reliable as its sister model. When it comes to skateboarding, you can’t ask for a better board than the Golden Dragon 2. It’s durable, firm and thanks to the concave skateboard deck design, will allow you to do many tricks. Tricks, that other boards could possibly not support as well.
In the early 1970s skateparks hadn't been invented yet, so skateboarders would flock and skateboard in such urban places as The Escondido reservoir in San Diego, California. Skateboarding magazine would publish the location and Skateboarders made up nicknames for each location such as the Tea Bowl, the Fruit Bowl, Bellagio, the Rabbit Hole, Bird Bath, the Egg Bowl, Upland Pool and the Sewer Slide. Some of the development concepts in the terrain of skateparks were actually taken from the Escondido reservoir.[27][28][29] Many companies started to manufacture trucks (axles) specially designed for skateboarding, reached in 1976 by Tracker Trucks. As the equipment became more maneuverable, the decks started to get wider, reaching widths of 10 inches (250 mm) and over, thus giving the skateboarder even more control. A banana board is a skinny, flexible skateboard made of polypropylene with ribs on the underside for structural support. These were very popular during the mid-1970s and were available in a myriad of colors, bright yellow probably being the most memorable, hence the name.
A skateboard is fundamentally a sum of its parts. If you want a good skateboard, you’ll want each component to be high quality. We’ll take a look at each part of a skateboard and talk about what quality means for the that component. We’ll try to give tips on how to spot a high or low quality implementation of that component and then we’ll share how SkateXS Skateboards measure up.  

Its All Powell-Peralta Ligament decks feature a wider and more robust polymeric strap. The ligament strap is so powerful that in case your board breaks, the ligament strap will hold your deck together to allow you to ride out of it. Ligament decks are same in weight as a 7-ply maple deck but provide more pop and stiffness that lasts longer than ordinary boards.


Launched in 1991 by professional skateboarder Mike Ternasky who was killed in a car accident in 1994, Plan B Skateboards was renewed in 2005 by professional skateboarders Danny Way and Colin McKay. The top Skateboards brand, recognized by its unique logo, offers customization, but it also produces skateboards that come already assembled and ready for immediate action with everything a skateboarder needs including the deck, wheels, trucks, and bearings. The decks are made with a durable and thick seven-ply maple. They are also designed for you to make them uniquely yours with cool graphics that reveal your personality. In addition to the decks, Plan B also produces wheels, toolkits, and the kind of hip clothing that every skateboarder wants to be seen wearing. In addition to Way and McKay, the Plan B team consists of pro skateboarders PJ Ladd, Chris Cole, Pat Duffy, Ryan Sheckler, Torey Pudwill, Leticia Bufoni, Chris Joslin, Felipe Gustavo and Sean Sheffey.
The deck is expertly constructed with a vertically laminated bamboo core and bamboo veneer exterior, all attached with triaxial glass and epoxy as well as a course grip tape top. The grip tape is arranged in an unusual and stylish, yet functional, design. The 34-inch board features a 13-degree nose angle and an 18-degree tail angle. With its directional shape, you’ll easily be able to cruise on this board or pull a few tricks.
A good helmet protects your most important vital organ. Remember that in some states helmets are required by law. In Oregon, for example, skaters 15 and under can be fined for not wearing a helmet. Knee and elbow pads will also save you from bumps and bruises. Knee pads are particularly valuable when learning to skate tall vertical walls because they allow you to slide down the wall on your knees instead of having to run out of every bailed attempt. Wrist and ankle injuries are common in skateboarding, so braces are another great investment.
In the past decade, I have begun seeing the emergence of skate decks being totally or partially made from carbon fiber or other metal materials instead of solely wood.  These decks typically last longer than regular wooden decks and aren’t prone to chipping or breaking like most made from wood.  The drawback to these materials is that they tend to feel “stiffer” than traditional wooden decks and experienced skaters may feel they are heavier and harder to do tricks on.  Carbon fiber decks are also more expensive, but this additional cost may be worth it if you tend to break decks easily.  Some brands also offer warranties against breakage under normal conditions for carbon fiber decks if you are worried about breakage.
Girl skateboards are know for their witty graphics and high quality canadian maple decks. This specific complete features Mike Carroll’s pro deck and it comes fully assembled directly from the manufacturer (Girl).   The reason this is such a great option for beginners is that all parts of this complete are truly pro quality and it’s built to last.  The width is also perfect for all ages and shoe sizes at a moderate 7.8″.  Definitely a great skateboard for beginners if you like the graphic and logo.
They aim to make of the best distinction to recognize among a thousand brands available. Starting from scratch, the brand has become successful with the invention of drop down longboard that convinces skaters around the world to have many advantages. Their belief in “making quality skateboards that will improve life” has never faded as they grow to be in the back of Blackcomb Ski Club. They even plant a tree for every product they make and sell to prove their eco-friendly operation.

One of the skateboarding companies that are at the op is Almost Skateboards, founded by pro skateboarders Daewon Song and Rodney Mullen in 2003 and distributed by Dwindle Distribution. Both had ceased participating in their previous companies, Enjoi and Artafact, respectively. Almost is a brand that concentrates on fun and creativity but on also not taking oneself too seriously. The company produces decks made of 7-ply, 8-ply and carbon fiber constructions, bound with resin epoxy glue. The brand offers completes that include skateboards with the deck, wheels, trucks and bearings, as well as wheels, accessories and apparel. The team consists of Rodney Mullen, Daewon Song, Cooper Wilt, Youness Amrani, Yuri Facchini, Tyson Bowerbank, Fran Molina, and Mitchie Brusco.

That’s a lot of wood! But it is by no means the end. In 2016 there were many other brands that have pleased us with wooden works of art. Chocolate were inspired by modern living shown in their Modern Homes series, Welcome beautifully presented decks in original shapes, and the two German brands Inpeddo and Mob showed that seven layers do not necessarily have to come from overseas.
Skateboarding, in one form or another, has been around since the late 1950’s when the first brave pioneer first attached roller skate wheels to a piece of wood. As skateboarding progressed to mimic surfing, skateboards evolved with the style of riding. Skateboards grew and changed shapes as riders experimented with everything from plastic to fiberglass to aluminum constructions - all in an effort to push what was possible. Like most sports or art forms, progression is at the heart of skateboard innovation.
A precursor to the extreme sport of street luge, that was sanctioned by the United States Skateboarding Association (USSA), also took place during the 1970s in Signal Hill, California. The competition was called "The Signal Hill Skateboarding Speed Run", with several competitors earning entries into the Guinness Book of World Records, at the time clocking speeds of over 50 mph on a skateboard. Due to technology and safety concerns at the time, when many competitors crashed during their runs, the sport did not gain popularity or support during this time.[36][37]

Radiate Ride Good Skateboards are made of 7-ply maple construction with epoxy resin glue. It features 356A heat-treated cast aluminum high performance 5.0 trucks with grade 8 kingpins and axles. The super high rebound 99A PU wheels with grooved running surface provide better traction and abrasion resistance. The Abec 5 high precision speed bearings offer precision performance and a smooth ride. It has an 80 grit durable color matched grip tape with transparency. It is completely assembled and ready to go. This product has a 4.3 rating on Amazon.
As Palace’s reputation began to grow, the brand added more riders, including ex-Stereo Skateboards pro Benny Fairfax, ex-Blueprint Skateboards pros Danny Brady and Chewy Cannon and Southbank mainstays Karim Bakhtaoui and Blondey McCoy. From the outset, Palace’s approach was to mix a core skate team with a heavy emphasis on soft goods which almost immediately propelled their appeal way beyond the confines of the skateboard market and expedited their growth into one of the biggest names in the street wear arena.
×