Freestyle skating remained healthy throughout this period, with pioneers such as Rodney Mullen inventing many of the basic tricks that would become the foundation of modern street skating, such as the "Impossible" and the "kickflip". The influence that freestyle exerted upon street skating became apparent during the mid-1980s; however, street skating was still performed on wide vert boards with short noses, slide rails, and large soft wheels. In response to the tensions created by this confluence of skateboarding "genres", a rapid evolution occurred in the late 1980s to accommodate the street skater. Since few skateparks were available to skaters at this time, street skating pushed skaters to seek out shopping centers and public and private property as their "spot" to skate. (Public opposition, in which businesses, governments, and property owners have banned skateboarding on properties under their jurisdiction or ownership, would progressively intensify over the following decades.) By 1992, only a small fraction of skateboarders continuing to take part in a highly technical version of street skating, combined with the decline of vert skating, produced a sport that lacked the mainstream appeal to attract new skaters.
They have continued to ride that wave over the past year, continuously putting out great edits, following cherry up with Sickness, Red Devil, Joyride, and Swoosh, all in collaboration with cherry’s filmer Bill Strobeck. We all know they will never fall off when it comes to putting out fire gear every new season and drop, but to keep it coming with actual great footage is another story, and is definitely making skateboarding better today.
However, this same company decided to ‘Cash-in’ on THE NAME BRAND, and now con-currently sells JUNK , made in China, at WAL MART. DO NOT BUY any ‘longboard’ they sell that has plastic trucks!! They are an accident awaiting a place to occur. I’ve seen wheels (from a company that prided itself on ‘the best wheels’) that are upwards of 4 mm out-of-round, which could easily cause speed-wobbles, even at pedestrian speeds. From my POV, they’ve opened themselves up to possibly numerous lawsuits, just because of the inferior quality, and poor design choices made in order to maximize profit.
Regardless of the length of these boards, they each have several components in common that include a deck, grip tape, trucks, and wheels. The deck is the actual surface piece of the board on which a rider stands to perform tricks or control their degree of motion. Decks range between seven and ten inches in width and although seven-ply wood is the most common material for them, they can also be crafted out of bamboo, carbon fiber, and even plastic. Decks are shaped in several unique concave designs, which include radial, progressive, W-concave, tub, and asymmetric. Radial concave decks have U-shaped curves and are ideal for beginners, as they provide one's feet with a reliable grip.
While the skate shoes design afforded better connection and traction with the deck, skaterboarders themselves could often be identified when wearing the shoes, with Tony Hawk once saying, "If you were wearing Vans shoes in 86, you were a skateboarder" Because of its connection with skateboarding, Vans financed the legendary skateboarding documentary Dogtown and Z-Boys and was the first sneaker company to endorse a professional skateboarder Stacy Peralta. Vans has a long history of being a major sponsor of many of skateboarding's competitions and events throughout skateboarding's history as well, including the Vans Warped Tour and the Vans Triple Crown Series.
Ohderii Skate Skateboards are made of a High-quality Plastic deck which will not easily break even when pressed over by a car. It comes with 3.125″ all aluminum alloy trucks, 59mm 78A super smooth PU wheels and ABEC-7 stainless steel bearings. It is ready to use and you can easily store it in your backpack. It has an average rating of 4.5 on Amazon.
I have a dream to hook up some of the world’s best skateboarders, and make everybody know and love this awesome sport! So, in the summer of 2017, I launched SkatesZone with little more than a dollar and want it to become an interesting place for all skaters where you can find a plenty of skateboards information, tips & tricks, instructions, and more.
You might have seen people talking about cruising styles and board drills but don’t find the talk attractive because you are not a skateboarder. This game gives you a lot of stuff to talk about with your friends and family relatives who skate as well. In fact, when you will get old, you will love to contribute to the pro conversations about skateboarding styles and maneuvers. It’s all about the ride and talks!
If you love the outdoors, traveling in style, and prefer to have as much control over your mode of transportation as possible, a skateboard is just what you need. Not just for high school kids or sports celebrities like Tony Hawk, the skateboard can be a useful and fun tool that can take you wherever you need to go, while also being a great outlet for the release of energy.
Phantom 2 trucks have a low profile, are lightweight and have a nice smooth edge for grinding. They also just look nice. The thing that sets Phantom trucks (both regular Phantoms and Phantom 2s) are their built in shock pads. Phantom calls it an "Impact Dispersion System," a 1.5 mm rubber shock pad built onto the bottom of the trucks. Shock pads help reduce stress from the trucks to the board.
Today's skateboarders are founders in this sport—they're pioneers—they are the first. There is no history in Skateboarding—its being made now—by you. The sport is being molded and we believe that doing the right thing now will lead to a bright future for the sport. Already, there are storm clouds on the horizon with opponents of the sport talking about ban and restriction.
A skateboard consists of a deck, trucks, wheels, bearings, hardware, and griptape. All parts come in a variety of sizes, graphics, colors, and signature pro series. The deck is the essential part of any skateboard. The deck ranges generally from 7.5" to 8.5". Skaters choose their board size for many reasons, but the basic deciding factor comes down to style of skating and foot size. Transition skaters usually ride a wider deck, while street skaters tend to go with a smaller deck. Skate brands such as Girl, enjoi, and Welcome offer a wide range of boards in regards to sizes and graphics. Skateboard trucks come in either a high or low setting, and also in a range of widths. The main factors in a truck, are how well they turn, and how well they grind. Independent, Venture, and Thunder, are truck brands that are well known for their turning and grinding capabilities. The skate hardware is generally either Phillips head or Allen key bolts. The skateboard wheels range from 50mm to 60mm. Some brands offer smaller and larger sizes, but 50-60mm is the general range. Like the deck sizes, wheel sizes depend on the skater's choice of terrain: Transition skaters tend to ride bigger wheels, while street skaters usually go with smaller wheels. Bones, Spitfire, Ricta, and Wayward wheel companies all make wheels for any terrain, whether you're a street shredder or a park burner. Skate bearings follow the ABEC rating system, which includes grades 1, 3, 5, 7, and 9. Bones, Bronson, and Andale are some of the top bearing brands in the skate market. CCS proudly carries all these brands, and many more.
I'm not talking about mall chain stores, like Zumiez; I mean a locally owned and operated skateboard shop. Look around at what they sell, and talk to the staff about the different brands. Of course, they may be biased toward the brands they carry, but chances are you'll learn something that will help you make a decision. There are some big-name board brands that you'll find in most shops, but there should also be some smaller brands you may not have heard or seen around town. There might even be a a local skater or manufacturer that you could support.
^ Jump up to: a b Rosenberger, Robert (June 19, 2014). "How Cities Use Design to Drive Homeless People Away: Saying "you're not welcome here"—with spikes". The Atlantic. The Atlantic Monthly Group. Archived from the original on July 1, 2014. Retrieved April 23, 2017. An example of an everyday technology that’s used to forbid certain activities is “skateboard deterrents,” that is, those little studs added to handrails and ledges. These devices, sometimes also called “skatestoppers” or “pig ears,” prevent skateboarders from performing sliding—or “grinding”—tricks across horizontal edges. A small skateboard deterrence industry has developed, with vendors with names like “stopagrind.com” and “grindtoahault.com.”
These boards are perfect! perfect shape (for me anyways) medium concave (which is better than deep or mellow in my opinion) perfect shape of the tail and nose, and have perfect pop (which last FOREVER) they're very durable too. Everything is perfect but why they're ranked so low is because not many people get deluxe boards than come here to write about how awesome they are.
Keep in mind how tall you are when choosing a board width. Also consider the kind of style you wish to skate. Most technical skaters (the ones who incorporate advanced flip tricks... like Rodney Mullen) tend to favor boards between 7.5 and 7.75 regardless of how tall or small they happen to be. The upper hand of having a thin board allows for quick rotation. The other side of the spectrum is the "go big" skaters (Jamie Thomas is a classic example of a "go big" guy). Most "go big" guys favor size 8.0 and up. The advantage of a wide heavy board feels more stable under your feet while in mid air and while landing (especially those who have big feet). If your a kid you might want to just stick with a 7.66 or smaller.
This entry is all about giving you an insight through the eyes of skatedeluxe. Which brands dominated your year in 2015? Our compilation of the ‘brands of the year’ is based on a combined check of deck sales, brand shop visits, your search requests and common interest on blog entries to skateboarding’s MVPs. Our in-house brand SK8DLX has been left out of the ranking. Still, we want to thank you that you keep skating our boards and that you seem to like what we put out. Enough talking, let’s start with the Top 15 skateboard deck brands of the year 2015
The World Industries logo used to be the marker of a diehard skater, but recently it's gotten into the children's skateboard market too. Because of the brand's long history and trusted reputation in the skateboard community at large, the boards are generally good quality. However, remember that the brand usually caters to hardcore skaters; some parents may not approve of some of the brand's imagery.
In the past decade, I have begun seeing the emergence of skate decks being totally or partially made from carbon fiber or other metal materials instead of solely wood. These decks typically last longer than regular wooden decks and aren’t prone to chipping or breaking like most made from wood. The drawback to these materials is that they tend to feel “stiffer” than traditional wooden decks and experienced skaters may feel they are heavier and harder to do tricks on. Carbon fiber decks are also more expensive, but this additional cost may be worth it if you tend to break decks easily. Some brands also offer warranties against breakage under normal conditions for carbon fiber decks if you are worried about breakage.
While they might not be so well known as an apparel company as so many other brands on this list, Sk8mafia stays winning with skateboarding’s core base. Their most prominent pro, Wes Kremer, was named Thrasher’s Skater of the Year for 2014, and they continue to drop a monthly edit featuring their whole crew through Ride Channel. The Mafia keeps the streets fed.
If you are looking to buy a reliable skateboard that will keep you busy for years to come, the Whitey Panda is the ideal choice. It’s a very good entry-level skateboard that can be put through a lot of wear and tear. The solid, metal skateboard trucks ensure that you will be kept sturdy and safe both on and off the ground. This helps the rider feels more confident when doing tricks, no matter where they are.
The nose and tail of a standard skateboard curve upward slightly to make tricks easier to perform. On most decks, the nose and tail are shaped slightly different. The nose is usually wider, longer and steeper than the tail which aids in nose-based (nollie) tricks, and also helps you differentiate the nose from the tail. Some shaped boards have very different nose and tail dimensions, and some old school boards lack noses all together.
Longboards excel when covering longer distances on roads and bike paths or for “bombing” hills. The wider trucks and wheelbase provide superior stability, and larger wheel options help retain speed for faster commuting. Still, longboards are less responsive than shorter boards and don’t always have kick tails, making them less functional in tight spaces.
SkateXS is a very popular brand among parents that have kids that are enthusiastic about skating. They have a variety of skateboards, plenty of color choices and even add a name tag of your child on the grip tape. This helps the child feel like they have full control over the board and its development. This, in turn, will make them treasure it more.
In an industry as diverse as skateboarding, the sheer number of skateboard brands on the market can be bewildering. With a seemingly never-ending amount of new brands emerging, alongside the numerous pre-existing ones, the market can certainly appear over crowded and confusing at times, which is hopefully where this list of some of our favourite skateboard brands comes in.