Moose boards are very solid in all categories. They are low priced, available in a variety of different shapes and sizes, and have been around for a while so they’ve built up a reputable brand name. You won’t go wrong buying a pack of Moose blanks if you’re the type of guy that goes through decks quickly or is looking to resell them at your local skatepark.

A “razor tail” is the term for when the tail of the skateboard deck becomes sharpened and worn due regular use and scraping the tail of your skateboard on the ground to stop.  When your deck gets razor tail, its becomes a weapon against you and anyone need you while you’re skating as being hit with a sharpened tail is very painful.  To avoid this from happening, you could buy a carbon fiber deck that may be more resistant to wear, but more importantly you should not scrape your tail to stop.  Instead you can lightly place one foot or toe down to slow your speed or powerslide to a stop.

Powell Peralta has gained increasing popularity in the 1980s, when skateboarding became an increasingly more sought-after action sports. Since then, they have been developing skateboards tailored to customers, taking reviews and critiques into consideration every time they were building a new model. The Powell Golden Dragon is a direct result of such careful consideration and tailored-modeling.
Almost every skate shop will have a wall of boards that is either organized by brand, size, or alphabetically. At our CCS skate shop, we have multiple walls of boards that we try and keep ordered alphabetically. A wall of skateboards, at first glance, can be overwhelming, but if you know what size and roughly what brands you like, it should be fairly easy for you to figure out what board you want. Now would be a good time to mention our CCS Skateboard Buyer’s Guide, specifically the Decks Guide. In the CCS Decks Guide, you’ll find all the information you need to gain a basic understanding of skateboard decks.

The Rimable Complete 22″ Skateboard is the most compact street board that are ready-to-use.  It is best for exercise and fun, and very portable.  There are five colors that you can choose from Black, Blue, White, Purple, and Green.  It has high-quality construction, with a high-density plastic deck.  It features extremely smooth 59mm wheels along with ABEC7 bearings and solid aluminum trucks.  It measures 22″ long and 6″ wide and weighs 4 pounds.  It has the best rating of 4.3 on Amazon.
Choosing a skateboard deck can be approached in a few different ways: you can choose your board based off the graphic, the brand, the shape, the width, or even the color. For most skateboarders, it’s a combination of all these factors, but if you’ve never skateboarded before, you may not know what shape, width, or brand you like best. In this case, choosing your favorite graphic would make total sense.
Pro decks are what most people are familiar with and what is seen most commonly around skateparks and driveways around the US.  These decks can have a variety of different logos and images on them and sometimes are a specific professional skater’s pro deck.  Pro decks provide skaters a way to support their favorite riders and have the same equipment they see all their favorite pros using.  The quality of professional decks and parts are almost always very high as they have a reputable and brand image to uphold.  For this higher level of quality and you can expect to pay 2-3x the cost of a blank complete.  If you want to save some money and still have a pro look, there are options available that have generic blank parts with a pro deck.  This may be a good option for a beginner skater who is not yet doing complex tricks that may break these cheaper parts, but they still want the look and feel of a pro skateboard.  As the skater progresses they can then switch out these generic parts for higher-end options as necessary.
There followed a video release containing a remix of archive footage of Glaswegian born ex Blueprint pro skater Colin Kennedy who was awarded a guest board by The National Skate Co in 2015 that referenced an earlier Irn Bru graphic of Kennedy’s released in 1996 during his time on Panic Skateboards. Additionally, The National Skate Co released another limited edition homage series of product to celebrate the classic 1997 UK video Playing Fields with the blessing of those involved in making the video originally.
What longboard brand is good? This is a common question that arises when you want to buy a Longboard. The typical answer is a Longboard brand which can fulfill the customer’s demand at an affordable price. Let’s examine all the leading longboard makers in the past year and until now. Let’s also take a look at their feature, quality, design, color, small parts, and many other relevant criteria.
There followed a video release containing a remix of archive footage of Glaswegian born ex Blueprint pro skater Colin Kennedy who was awarded a guest board by The National Skate Co in 2015 that referenced an earlier Irn Bru graphic of Kennedy’s released in 1996 during his time on Panic Skateboards. Additionally, The National Skate Co released another limited edition homage series of product to celebrate the classic 1997 UK video Playing Fields with the blessing of those involved in making the video originally.
Pro Skateboarder, Jamie Thomas developed the Zero brand in Carlsbad, CA and has built it into one of the top skateboard brands. Though the Zero brand initially distributed clothing, it eventually evolved to boards designed to suit the need for any tricks performed. The Zero team is comprised of a close group of skateboard professionals that have turned their passion into a company dedicated to provide the latest in skateboard innovation and helped Zero Skateboards become a fantastic skateboard brand. Zero boards are great for maneuvers, stability and especially grinds, with their specially designed features. Their innovation and high-quality designs has made Zero Skateboards one of the good skateboard brands today.
Freestyle skating remained healthy throughout this period, with pioneers such as Rodney Mullen inventing many of the basic tricks that would become the foundation of modern street skating, such as the "Impossible" and the "kickflip". The influence that freestyle exerted upon street skating became apparent during the mid-1980s; however, street skating was still performed on wide vert boards with short noses, slide rails, and large soft wheels. In response to the tensions created by this confluence of skateboarding "genres", a rapid evolution occurred in the late 1980s to accommodate the street skater. Since few skateparks were available to skaters at this time, street skating pushed skaters to seek out shopping centers and public and private property as their "spot" to skate. (Public opposition, in which businesses, governments, and property owners have banned skateboarding on properties under their jurisdiction or ownership, would progressively intensify over the following decades.)[40][41] By 1992, only a small fraction of skateboarders continuing to take part in a highly technical version of street skating, combined with the decline of vert skating, produced a sport that lacked the mainstream appeal to attract new skaters.
If you didn’t already know, the “nose” of a skateboard is typically the front and the “tail” is the back.  When you fall or slip and your board slams into curbs, fences, or other hard objects, it’s common for the wooden ends to chip or become damaged upon impact.  Over time these chips can make it harder to preform tricks and even just cruise around.  These chips can be prevented by buying a carbon fiber or non-wood deck, or by there are some metal edges available that can be installed on the nose and tail.
You may think that this is a cheap board with a low quality. If you are, then you are certainly wrong, my dear. It has soft wheels which will help you to get stability when riding. It also takes less effort to push the board because the deck is low compared to the other boards. Henceforth, it is the most comfortable board to ride for the beginners.
After riding Powell decks for many years, I was given the opportunity by Michael Furukawa at Skate One Corp. to create my own board brand. This was an honor but I needed a co-pilot for this mission to happen. I asked Mimi Knoop if she would join forces with me and this was the beginning of an all girls skate brand that we called hoopla skateboards.
Skateboarding has become a very popular means of transport over the years. Skateboards are great, no matter if you’re a student looking for a product to help you get around, a mother of two or just a skateboarding enthusiast. Getting around can be tricky, especially if your city is packed with traffic and fumes, and you don’t want to add to the problem. If you don’t mind cruising on the side of a pavement or a relatively clean road, skateboards can be a great way to have some fun and experience a new hobby.
You might have seen people talking about cruising styles and board drills but don’t find the talk attractive because you are not a skateboarder. This game gives you a lot of stuff to talk about with your friends and family relatives who skate as well. In fact, when you will get old, you will love to contribute to the pro conversations about skateboarding styles and maneuvers. It’s all about the ride and talks!
Skateboarding is an action sport which involves riding and performing tricks using a skateboard, as well as a recreational activity, an art form, a entertainment industry job, and a method of transportation.[1] Skateboarding has been shaped and influenced by many skateboarders throughout the years. A 2009 report found that the skateboarding market is worth an estimated $4.8 billion in annual revenue with 11.08 million active skateboarders in the world.[2] In 2016, it was announced that skateboarding will be represented at the 2020 Summer Olympics in Tokyo.[3]
“We make 38 different proprietary shapes, and what is more important than the shape is the leverage that we design on each board. The mold we use, and where we drill on each mold is the magic. Do all popsicles ride the same? Of course not. We are a step beyond almost everyone with that because I am nerdy about how stuff rides and performs. This is what our riders skate and love, we aren’t trying to capture some demographic.
Here's some general guidelines to get you started: Narrower decks are lighter and easier to flip, but you’ll sacrifice some stability. Wider boards are more stable but are heavier and slightly less ideal for some tricks. Skaters who like flip tricks, manuals, ledges, and flat bars usually prefer boards on the narrower side of the spectrum (7.75 – 8.25 inches). Those who skate big bowls, hand rails, or like to jump down large gaps at high speeds are usually more comfortable with a larger board (8.25 – 9.0 inches).
Made with bamboo and fiberglass, this board is tough, flexible, and ready for anything. The construction is designed to feel and act like a snowboard. The drop-through design is perfect for freestyle longboarding, commuting, carving, pumping, and more. It gives you better stability and more wheel clearance. The board is definitely best designed for carving but tricks and kicks are easily done as well.
Girl’s next full-length video came in 2003 with the release of ‘Yeah Right‘ which introduced a crew of younger Girl riders including Paul Rodriguez and Jereme Rogers, along with announcing videographer Ty Evans addition to the Crailtap family. From 2002 onwards, Ty Evans had been the main driving force behind Crailtap’s video output as Spike Jonze’s Hollywood directorial career took off.

The first thing to consider is what kind of skateboarding you want to do. Do you want to skate your local skate park and learn tricks? Do you want something for commuting across town or campus? Or, would you enjoy charging down hills at high speeds? Take a look at the options below and note which features work well for the type of skating you want to do.

When you’re searching for one of the best decks on the market, it’s important to not go overboard. You don’t need one that is made from the rarest wood or that has the most unique design. The best boards may be the ones that balance cost, design, and quality. After all, with healthy use, you’ll eventually have to replace your deck anyway. You want the one that will give you the most functionality and enjoyment while you use it.

The skateboard is directional, so if you’re skating switch the tail end will be forward, though, it makes for an easy switch heel flip. The deck itself is plastic. The skateboard dimensions are 3x6x22 inches. The wheels are 59MM urethane custom Skatro brand wheels. The bearings are ABEC 7 Skatro bearings. The trucks are 3 inches aluminum trucks. The board itself is only a light 4.7lbs and comes in one color.

There are actually several types of skateboards but the most common ones are the longboard, cruiser, and carve skateboards. A longboard is usually at least 33 inches. It is a great mode of transportation and works well for cruising around. The cruiser also works well as a mode of transportation but many consider it more beneficial as it has a shorter skateboard, which promotes ease in transporting around.
Decks come in a variety of shapes and sizes. You can choose a mini-board, a cruiser, a drop-through, or a standard deck for your favorite set of wheels and hardware. Widths range too from a few inches with a 22-inch board to the wide size of a true cruiser. Some decks are flat as possible while others are significantly concave for optimized turning. You can buy a deck with artwork and grip tape already attached for a quick install or you can get a bare-bones wooden deck to truly customize.
×