Jump up ^ Williamson, Elizabeth (October 11, 2013). "Skateboarders See a (Kick) Flip Side to the Government Closing: With Washington Plazas Empty and Patrols Down, a Banned Sport Is Suddenly On" (video). The Wall Street Journal, U.S. Edition. Retrieved March 30, 2017. One positive thing about the gov't shutdown – spots at gov't buildings are now skateable – Darren Harper, Pro Skateboarder, via Facebook.

With the evolution of skateparks and ramp skating, the skateboard began to change. Early skate tricks had consisted mainly of two-dimensional freestyle manoeuvres like riding on only two wheels ("wheelie" or "manual"), spinning only on the back wheels (a "pivot"), high jumping over a bar and landing on the board again, also known as a "hippie jump", long jumping from one board to another, (often over small barrels or fearless teenagers), or slalom. Another popular trick was the Bertlemann slide, named after Larry Bertelemann's surfing manoeuvres.
Freestyle skating remained healthy throughout this period, with pioneers such as Rodney Mullen inventing many of the basic tricks that would become the foundation of modern street skating, such as the "Impossible" and the "kickflip". The influence that freestyle exerted upon street skating became apparent during the mid-1980s; however, street skating was still performed on wide vert boards with short noses, slide rails, and large soft wheels. In response to the tensions created by this confluence of skateboarding "genres", a rapid evolution occurred in the late 1980s to accommodate the street skater. Since few skateparks were available to skaters at this time, street skating pushed skaters to seek out shopping centers and public and private property as their "spot" to skate. (Public opposition, in which businesses, governments, and property owners have banned skateboarding on properties under their jurisdiction or ownership, would progressively intensify over the following decades.)[40][41] By 1992, only a small fraction of skateboarders continuing to take part in a highly technical version of street skating, combined with the decline of vert skating, produced a sport that lacked the mainstream appeal to attract new skaters.
i would recommend a deck size of 8.0 to 8.25 as for brand baker,girl,chocolate deathwish, its all preference the main difference between brands is the shape of the nose and tail. As for trucks i would go with independents or thunders. thunder have a quicker and more responsive turn while independents have a more delayed smooth turn. also thunders tend to wear away faster while independents don't. As for wheels go with 52mm or 54mm either spitefire formula fours of bones stf.
First, you’ll need to consider the size of the skateboard. Most skateboards are about eight inches wide, but if you have very large feet, or you really want to feel very stable as you learn, consider going with something wider. Remember that the wider you go, the harder it is to learn tricks and to go around curves. If you want to rotate your board mid-air during a jump, you need a board that is no wider than eight inches.
Powell Peralta is a brand that has been around since the late 1970s. The Powell Golden Dragon has been on the market for over four decades now, and its popularity hasn’t decreased. It’s easy to see why even legends like Steve Caballero recommend these skateboards. Powell is known for having boards that fit every age range and skill level, satisfying the needs of many. It’s also probably the reason as to why the product is surrounded by 5-star reviews.
The magical thing about Supreme is that—despite what some may think—it actually caters to everyone. While they may not go out of their way to make you feel welcome, at its core, the brand is a legendary downtown skate institution, and there is no singular sensibility you can pin on Supreme. It's hip-hop and punk, menswear and streetwear. The unifying aspect is deep roots in skate, music, and art. Beyond that, anything goes.
Freestyle skating remained healthy throughout this period, with pioneers such as Rodney Mullen inventing many of the basic tricks that would become the foundation of modern street skating, such as the "Impossible" and the "kickflip". The influence that freestyle exerted upon street skating became apparent during the mid-1980s; however, street skating was still performed on wide vert boards with short noses, slide rails, and large soft wheels. In response to the tensions created by this confluence of skateboarding "genres", a rapid evolution occurred in the late 1980s to accommodate the street skater. Since few skateparks were available to skaters at this time, street skating pushed skaters to seek out shopping centers and public and private property as their "spot" to skate. (Public opposition, in which businesses, governments, and property owners have banned skateboarding on properties under their jurisdiction or ownership, would progressively intensify over the following decades.)[40][41] By 1992, only a small fraction of skateboarders continuing to take part in a highly technical version of street skating, combined with the decline of vert skating, produced a sport that lacked the mainstream appeal to attract new skaters.
Keep in mind how tall you are when choosing a board width. Also consider the kind of style you wish to skate. Most technical skaters (the ones who incorporate advanced flip tricks... like Rodney Mullen) tend to favor boards between 7.5 and 7.75 regardless of how tall or small they happen to be. The upper hand of having a thin board allows for quick rotation. The other side of the spectrum is the "go big" skaters (Jamie Thomas is a classic example of a "go big" guy). Most "go big" guys favor size 8.0 and up. The advantage of a wide heavy board feels more stable under your feet while in mid air and while landing (especially those who have big feet). If your a kid you might want to just stick with a 7.66 or smaller.
A precursor to the extreme sport of street luge, that was sanctioned by the United States Skateboarding Association (USSA), also took place during the 1970s in Signal Hill, California. The competition was called "The Signal Hill Skateboarding Speed Run", with several competitors earning entries into the Guinness Book of World Records, at the time clocking speeds of over 50 mph on a skateboard. Due to technology and safety concerns at the time, when many competitors crashed during their runs, the sport did not gain popularity or support during this time.[36][37]
When you’re at the skate park or in a freestyle environment at a parking lot or structure, you want to have the most stability possible. You wouldn’t want your trucks cracking or a ball bearing spewing out during the landing of a nice front style 360 flip. If you’re in school, then choosing a skateboard brand for college while you’re away will be extremely easy given that this board is so very cheap and durable.

Velocity Boards Retro Skateboards is a complete 22″ Banana Skateboard.  It includes 6″ Lightweight Aluminum Trucks, High-Speed ABEC-7 Bearings, High-Quality Wheels & Bushings and Hardware.  It has a Unique Textured Waffle Pattern on Deck and is designed for Maximum Grip.  The Deck measures about 22 x 6 x 4″.  It has a 6″ Truck Axle and a 3″ Truck Hanger.  It has a maximum weight capacity of  176 lbs. (80 kgs.).  It is great for all skaters who are 6 years old and above.  It has an Amazon rating of 4.7.
TIP: Extra width and short noses make old school boards more difficult to flip or lift off the ground, so they are not ideal for street skating. With some old school boards, the truck mounting holes are drilled to only fit certain trucks, so make note of the truck pattern before you buy the deck. If you’re not sure your trucks will fit, just give us a call and we’ll figure it out. Shop Old School Compatible Trucks
Founder Richard Novak is also widely credited as creating the skateboard industry as we know it today by establishing skateboarding as a separate culture and business by wrestling the sport away from the control of the roller-skating industry in the early 1970’s and promoting it through sponsoring events, supporting the nascent skateboard magazine culture, pioneering technologies within skateboard, truck and wheel construction and establishing the edgy cultural identity of skateboarding from the very beginning.
Skateboarders like things that aren't skateboarding, too, you know. Camping, fishing, motorcycles… Uh, skateboarding? Crap. Whatever. Pro skater Adrian Lopez founded Loser machine and the Dark Seas Division as a way to explore other facets of the culture through cool clothing. Loser Machine is a complete collection that goes far beyond that typical tees, jeans, and hats formula that many skate apparel brands rely on—leather motorcycle gloves, denim vests, and floral print button-downs are all evidence that this is a well-conceived project from a skater with good taste.
I'm not talking about mall chain stores, like Zumiez; I mean a locally owned and operated skateboard shop. Look around at what they sell, and talk to the staff about the different brands. Of course, they may be biased toward the brands they carry, but chances are you'll learn something that will help you make a decision. There are some big-name board brands that you'll find in most shops, but there should also be some smaller brands you may not have heard or seen around town. There might even be a a local skater or manufacturer that you could support. 
Made with bamboo and fiberglass, this board is tough, flexible, and ready for anything. The construction is designed to feel and act like a snowboard. The drop-through design is perfect for freestyle longboarding, commuting, carving, pumping, and more. It gives you better stability and more wheel clearance. The board is definitely best designed for carving but tricks and kicks are easily done as well.
If you decide that you don’t want to spend the money for a pro-quality complete, then this is your best bet for a completely blank skateboard.  You’re just not going to find anything else with similar quality anywhere near this price range.  This blank skateboard is an even 8″ with 9 layers of plywood in the deck.  This makes it ideal for any beginner especially adults or children with large feet.  A great option for someone on a budget or if you want to try a no-frills quality skateboard setup, before deciding if you want to invest further on a pro-style skateboard.
As has been noted that Longboard Brand is the king of all brands. For five years, it has maintained the first position without any ups and downs. The survey for 2018 has also given the same result for Sector 9. The attractive design and technical support of this brand have received a maximum score from the customers. It has unbeaten quality, size, riding style, overall performance, safety, and other relevant requirements. If you have the budget, you can undoubtedly rely on this best longboard brand.

This board is an excellent option for beginners because of its simplicity and durability. The lightly concave design allows for simple turns but doesn’t require the rider to be an excellent navigator. You can start off riding this deck down the street and use it as you learn ollies, kickflips, and how to drop in to a half pipe. It will withstand it all and look good doing it.

By 2001 skateboarding had gained so much popularity that more people under the age of 18 rode skateboards (10.6 million) than played baseball (8.2 million), although traditional organized team sports still dominated youth programs overall.[43] Skateboarding and skateparks began to be viewed and used in a variety of new ways to complement academic lessons in schools, including new non-traditional physical education skateboarding programs, like Skatepass[44] and Skateistan,[45] to encourage youth to have better attendance, self-discipline and confidence.[46][47][48] This was also based on the healthy physical opportunities skateboarding was understood to bring participants for muscle & bone strengthening and balance, as well as the positive impacts it can have on youth in teaching them mutual respect, social networking, artistic expression and an appreciation of the environment.[49][50][51][52]
The Bamboo Skateboards Galaxy Series Cosmic Cloud Skateboard Deck is an excellent option. This concave board is made exclusively of a bamboo hybrid, rather than pure maple. This means the deck is lighter, stronger, more flexible, and can even absorb shock better. The non-carbonized, light-wood deck is made of 6-ply wood and is in its fourth generation of designs.
These are commonly found at walmart. Price is usually around $50, which is the price for a good set of longboard wheels. If you want a good longboard and you are on a budget, search for a bargain of a name brand on craigslist or other similar sites. Sometimes you find a jem forn cheap. I recommend buying a reasonably priced name brand such as flippin board co, landyachtz, or loaded . Hope this helps :—)
While the skate shoes design afforded better connection and traction with the deck, skaterboarders themselves could often be identified when wearing the shoes, with Tony Hawk once saying, "If you were wearing Vans shoes in 86, you were a skateboarder"[27] Because of its connection with skateboarding, Vans financed the legendary skateboarding documentary Dogtown and Z-Boys and was the first sneaker company to endorse a professional skateboarder Stacy Peralta. Vans has a long history of being a major sponsor of many of skateboarding's competitions and events throughout skateboarding's history as well, including the Vans Warped Tour and the Vans Triple Crown Series.[8][81][82][83][84][85]
“They built the industry before they built their business,” said Denike who became one of the early product testers as a 15-year-old when he was approached by Novak and Shuirman in a skateboard park. “It was just raw entrepreneurial spirit. They took it from a fad to an actual business and, as a group, decided they were going to focus on growing the industry. If they were good businessmen, they would get a piece of that pie.”
If you are looking to buy a reliable skateboard that will keep you busy for years to come, the Whitey Panda is the ideal choice. It’s a very good entry-level skateboard that can be put through a lot of wear and tear. The solid, metal skateboard trucks ensure that you will be kept sturdy and safe both on and off the ground. This helps the rider feels more confident when doing tricks, no matter where they are.

Punisher Skateboards Warphant measures 31 x 7.5 inch.  It has a 9-Ply Maple Black Board with Concave Deck and Double Kick Tail.  It comes with ABEC-3 Bearings, 5-inch V-style Heavy Duty Alloy Trucks, and Bases.  It uses 54 x 36 mm PU injection molded wheels and PE Riser Pad with PU Cushion and Punisher Logo.  It is perfect for learning and doing tricks.  It is best suited for riders who are 8 years old and above.  It has a 5 rating on Amazon.


By 2001 skateboarding had gained so much popularity that more people under the age of 18 rode skateboards (10.6 million) than played baseball (8.2 million), although traditional organized team sports still dominated youth programs overall.[43] Skateboarding and skateparks began to be viewed and used in a variety of new ways to complement academic lessons in schools, including new non-traditional physical education skateboarding programs, like Skatepass[44] and Skateistan,[45] to encourage youth to have better attendance, self-discipline and confidence.[46][47][48] This was also based on the healthy physical opportunities skateboarding was understood to bring participants for muscle & bone strengthening and balance, as well as the positive impacts it can have on youth in teaching them mutual respect, social networking, artistic expression and an appreciation of the environment.[49][50][51][52]
The main feature of this longboard is its attractiveness. The color of the board is very vivid and pleasing. Also, the smoothness of the longboard is so much striking. Another unique thing that you will find with this longboard is its wheel bite is zero percent. If you want to attract the attention of the people with your longboard while spending reasonable money, this longboard is the best choice for you. Amazingly, even after one or two years, you will not find any crack on the board.

When looking at skateboarding’s history, the only thing that’s stayed the same is the overall structure: every board consists of four skateboard wheels, two skateboard trucks, and a riding surface of some kind. And while we’ve come a long way from the days of metal and clay wheels, some aspects of skateboarding - like the brands manufacturing some of the most trusted products - haven’t changed at all. Independent Trucks has been designing trucks since 1978. Powell Peralta, the company responsible for Powell Skateboards, Bones Wheels, Bones Bearings, and the Bones Brigade also started in 1978. NHS, Inc., the company that produces Santa Cruz Skateboards, Independent Trucks, Bronson Speed Bearings, Krux trucks, Flip Skateboards, Ricta Wheels, Mob Grip, and OJ Wheels started in 1973. It’s no wonder these brands are still doing so well - they’ve been with skateboarding since the beginning. Since the day skateboarding went from something surfers did when the waves were flat to its own sport that involves technique, practice, and careful consideration, a small handful companies have been there to help skateboarding become what it is today.

Uses Smaller Wheels For Improved Stability – Any true skater knows that wheels are essential in terms of the type of skating performed. Powell Classic, being an original company, understands that most skaters are doing tricks or will be doing tricks. To provide greater stability, they release boards with smaller wheels designed for basic street skating.
It’s a beautifully designed affordable skateboard that provides an optimum ride for both amateurs and pro riders. Its high-rebound, hand-cast polyurethane wheels are built to deliver best roll and grip during an action. Its 7.625 inches wide and 31.625 inches long top board offers ample grip and stable ride for the beginners who are still learning to stand while riding without any fear of slipping off the board. Its colorful screen-printed bottom lets you ride in style. It is built to meet demanding specifications.
A 100% genuine Penny board. It is a complete skateboard featuring classic design. Its design reference comes from 1970s boards. It replicates the retro era skateboard. Its small size makes it an ideal cruiser providing you with ease of using it anywhere. Whether commuting to your school or surfing along with friends, Penny Complete Skateboard provides a smooth ride. It is lightweight and easy to carry around as well. It can easily bear heavy weight and will not give in. You can easily master your skateboarding skills and become a pro using genuine Penny Australia Classic Complete Skateboard.
With the evolution of skateparks and ramp skating, the skateboard began to change. Early skate tricks had consisted mainly of two-dimensional freestyle manoeuvres like riding on only two wheels ("wheelie" or "manual"), spinning only on the back wheels (a "pivot"), high jumping over a bar and landing on the board again, also known as a "hippie jump", long jumping from one board to another, (often over small barrels or fearless teenagers), or slalom. Another popular trick was the Bertlemann slide, named after Larry Bertelemann's surfing manoeuvres.
In March 1976, Skateboard City skatepark in Port Orange, Florida and Carlsbad Skatepark in San Diego County, California would be the first two skateparks to be opened to the public, just a week apart. They were the first of some 200 skateparks that would be built through 1982. This was due in part to articles that were running in the investment journals at the time, stating that skateparks were a good investment.[6][27][38] Notable skateboarders from the 1970s also include Ty Page, Tom Inouye, Laura Thornhill, Ellen O'Neal, Kim Cespedes, Bob Biniak, Jana Payne, Waldo Autry, Robin Logan, Bobby Piercy, Russ Howell, Ellen Berryman, Shogo Kubo, Desiree Von Essen, Henry Hester, Robin Alaway, Paul Hackett, Michelle Matta, Bruce Logan, Steve Cathey, Edie Robertson, Mike Weed, David Hackett, Gregg Ayres, Darren Ho, and Tom Sims.[35]

In an industry as diverse as skateboarding, the sheer number of skateboard brands on the market can be bewildering. With a seemingly never-ending amount of new brands emerging, alongside the numerous pre-existing ones, the market can certainly appear over crowded and confusing at times, which is hopefully where this list of some of our favourite skateboard brands comes in.
×