Ever notice small vertical or horizontal cracks through your grip tape or by the hardware of your trucks?  These are called stress or pressure cracks and are basically mini fractures of your skateboard deck that typically are seen in the areas of the deck that withstand the greatest impact (around the trucks).  A few pressure cracks is generally no big deal and you won’t even notice them while skating, but they can compound and grow larger and make your deck lose “pop” and increase the chance of snapping.  To avoid pressure cracks, you cant use riser pads underneath your trucks to reduce the level of impact your deck takes.  You should also avoid over tightening your hardware and storing your skateboard in a very humid place as both of these practices can also make your board weaker and more susceptible to pressure cracks.
Canadian maple wood decks are the industry standard and is what the vast majority of decks on this list will be made of.  However, is the seller just says “maple” the deck is typically made in China and the wood may be slightly softer and lower quality.  This is more common among the lower cost blank decks, and most pro brands or higher end blanks are typically 100% Canadian maple.  In my opinion, the difference between Canadian and Chinese maple decks is slight and in many cases, a cheaper Chinese deck may be the better option for you if you have a small budget or tend to go through decks very quickly.
Are you on a hunt for the best skateboard on the market today? Then you are in the right place as this comprehensive article is designed to give you information about skateboarding and types of skateboards in general. By learning about the different types of skateboards and what each one can do, figuring out what works for you the best is a lot easier.

A “razor tail” is the term for when the tail of the skateboard deck becomes sharpened and worn due regular use and scraping the tail of your skateboard on the ground to stop.  When your deck gets razor tail, its becomes a weapon against you and anyone need you while you’re skating as being hit with a sharpened tail is very painful.  To avoid this from happening, you could buy a carbon fiber deck that may be more resistant to wear, but more importantly you should not scrape your tail to stop.  Instead you can lightly place one foot or toe down to slow your speed or powerslide to a stop.

It's been a long time since Cara-beth has had a feature in an international skateboard publication and in the September 2008 issue of The Skateboard Mag the longtime silence has been broken with a CB interview. With that in mind there was an impromptu launch party for the issue at the Encinitas Y that found longtime CB mentor Duane Peters, Dave Hackett, Lester Kasai and Tony Mag in attendance. Short but sweet skate session on the vert and bowl ensued and all went home happy. Congrats on a job well done Cara-beth!


If you have a great passion for the downhill ride as well as cruising and you are a beginner of longboarding, then ultimately, this board can satisfy your needs. It’s a versatile board as you can use it for cruising and downhill riding. The board is equipped with the perfect wheel size — not so big and not so small. It is big enough to give you a smooth ride but it is not too big to get wheel bite. Isn’t it cool? The 44 inches size of its wheels is perfect for comfortable cruising as well as riding downhill. It has some flex which will reduce the stress on your ankle and knees.
Using 12 years of experience in manufacturing skateboards, Penny Skateboards was created to offer the skateboarding community high performance and high quality plastic skateboards. The brand focuses on creating each Penny skateboard with attention to detail and with the best raw materials. Not only are they meant to look good, but are meant to work just as good if not better.
SkatesZone.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, SkatesZone.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.
Punisher Skateboards Warphant measures 31 x 7.5 inch.  It has a 9-Ply Maple Black Board with Concave Deck and Double Kick Tail.  It comes with ABEC-3 Bearings, 5-inch V-style Heavy Duty Alloy Trucks, and Bases.  It uses 54 x 36 mm PU injection molded wheels and PE Riser Pad with PU Cushion and Punisher Logo.  It is perfect for learning and doing tricks.  It is best suited for riders who are 8 years old and above.  It has a 5 rating on Amazon.
7.12"7.25"7.3"7.5"7.56"7.62"7.7"7.75"7.8"7.81"7.87"7.875"7.88"7.9"8"8.02"8.06"8.1"8.12"8.125"8.13"8.18"8.19"8.2"8.25"8.27"8.28"8.28"8.3"8.31"8.32"8.35"8.37"8.375"8.38"8.4"8.44"8.45"8.47"8.5"8.55"8.6"8.62"8.63"8.67"8.68"8.7"8.75"8.8"8.87"8.88"8.9"8.948.989"9.05"9.1"9.12"9.13"9.16"9.18"9.2"9.25"9.265"9.3"9.31"9.32"9.37"9.375"9.38"9.4"9.42"9.5"9.56"9.57"9.6"9.62"9.625"9.739.75"9.78"9.8"9.81"9.849.85"9.87"9.875"9.89"9.9"9.97"9.9810"10.1"10.2"10.25"10.34"10.37"10.5"11.2"11.75"

The nose and tail of a standard skateboard curve upward slightly to make tricks easier to perform. On most decks, the nose and tail are shaped slightly different. The nose is usually wider, longer and steeper than the tail which aids in nose-based (nollie) tricks, and also helps you differentiate the nose from the tail. Some shaped boards have very different nose and tail dimensions, and some old school boards lack noses all together.
If you have a great passion for the downhill ride as well as cruising and you are a beginner of longboarding, then ultimately, this board can satisfy your needs. It’s a versatile board as you can use it for cruising and downhill riding. The board is equipped with the perfect wheel size — not so big and not so small. It is big enough to give you a smooth ride but it is not too big to get wheel bite. Isn’t it cool? The 44 inches size of its wheels is perfect for comfortable cruising as well as riding downhill. It has some flex which will reduce the stress on your ankle and knees.
Regardless of the length of these boards, they each have several components in common that include a deck, grip tape, trucks, and wheels. The deck is the actual surface piece of the board on which a rider stands to perform tricks or control their degree of motion. Decks range between seven and ten inches in width and although seven-ply wood is the most common material for them, they can also be crafted out of bamboo, carbon fiber, and even plastic. Decks are shaped in several unique concave designs, which include radial, progressive, W-concave, tub, and asymmetric. Radial concave decks have U-shaped curves and are ideal for beginners, as they provide one's feet with a reliable grip.
The Quest can be considered as the best improving Longboard brand because in 2014 it was in the 4th position, whereas in 2018 it is in 2nd place. This is a good improvement for a Longboard brand in these competitive days! Even though it is now in 2nd place, it has a little gap with Sector 9. They mainly focused on the customer’s needs by collecting client opinions. They have been improving the size, quality, performance, speed, design, and color of their longboards.
It's really hard to continue with a small girls’ board brand when so many companies are now interested in the women's market. We feel like it's the right time to close down the brand and move on to the next chapter. Thanks to George and Juli Powell as well as Michael Furukawa for their vision and support of the brand and our mission over the last decade. Thanks to those who bought our products, our team riders, media, and to those that believed in what we were doing from the very beginning. I also want to thank Mimi Knoop who wore multiple hats over the years and was responsible for making hoopla a brand that was respected, legitimate, and one that we were proud to be a part of.
As Palace’s reputation began to grow, the brand added more riders, including ex-Stereo Skateboards pro Benny Fairfax, ex-Blueprint Skateboards pros Danny Brady and Chewy Cannon and Southbank mainstays Karim Bakhtaoui and Blondey McCoy. From the outset, Palace’s approach was to mix a core skate team with a heavy emphasis on soft goods which almost immediately propelled their appeal way beyond the confines of the skateboard market and expedited their growth into one of the biggest names in the street wear arena.
As it eventually became more apparent that skateboarding had a particular identity with a style of shoe, other brands of shoe companies began to specifically design skate shoes for functionality and style to further enhance the experience and culture of skateboarding including such brands as; Converse, Nike, DC Shoes, Globe, Adidas, Zoo York and World Industries. Many professional skateboarders are designed a pro-model skate shoe, with their name on it, once they have received a skateboarding sponsorship after becoming notable skateboarders. Some shoe companies involved with skateboarding, like Sole Technology, an American footwear company that makes the Etnies skate shoe brand, further distinguish themselves in the market by collaborating with local cities to open public Skateparks, such as the etnies skatepark in Lake Forest, California.[83][83][84][86][87]
As the oldest brand on this list, Santa Cruz rightly holds the distinction of being the oldest skateboard brand in the industry and thus, the brand which effectively created the modern skateboard brand as we know it today. Founded as part of NHS Inc. a Santa Cruz based skateboard distribution company over 40 year ago, Santa Cruz as a brand has played a large part in every era of skateboarding history since its inception.
Harsh weather, cracked pavement, angry cops—all things that make Raw New England just so raw. The name is also an acronym for Ready Amongst Willing—a perfect moniker for one of the East Coast's toughest brands. Raw's product drops aren't quite as frequent or bountiful as some other brands on this list, but the decks, tees, hoodies, and caps with the bold RAW logo are must-haves for New England's skate crowd. Visit the brand's shops in Boston or in CT to get the goods in person.
If you are looking for a skateboard that will provide you with all the necessary features you need to ride safely and efficiently, then the Punisher Butterfly Jive will be the perfect board for you. No matter if you want to give this skateboard to one of your kids or if you want it for yourself, it has the perfect size to fit just about anyone. This makes it very versatile, and is able to be used by nearly every age range.
What longboard brand is good? This is a common question that arises when you want to buy a Longboard. The typical answer is a Longboard brand which can fulfill the customer’s demand at an affordable price. Let’s examine all the leading longboard makers in the past year and until now. Let’s also take a look at their feature, quality, design, color, small parts, and many other relevant criteria.
Founded by English freestyle skater, engineer and skateboarding entrepreneur Jeremy Fox in 1987 (Fox is also reputed to be the first person to import skateboard specific footwear ‘Pro-Keds’ into the UK) Deathbox in its heyday was one of only a handful of European brands that ever controlled enough market share to be a significant player in the skateboard industry.

Founded by English freestyle skater, engineer and skateboarding entrepreneur Jeremy Fox in 1987 (Fox is also reputed to be the first person to import skateboard specific footwear ‘Pro-Keds’ into the UK) Deathbox in its heyday was one of only a handful of European brands that ever controlled enough market share to be a significant player in the skateboard industry.

Krux make some great trucks. Krux makes "downlows" trucks, that have a lower hanger and kingpin than even Grind King. However, you will need a hex tool to adjust them. The Krux IIIs with Topless System are even lighter, with special bushings that feel broken in from the start, but that also provide a faster snap back into position. Krux trucks are light and low.
The magical thing about Supreme is that—despite what some may think—it actually caters to everyone. While they may not go out of their way to make you feel welcome, at its core, the brand is a legendary downtown skate institution, and there is no singular sensibility you can pin on Supreme. It's hip-hop and punk, menswear and streetwear. The unifying aspect is deep roots in skate, music, and art. Beyond that, anything goes.

FTC has grown from being the staple skate shop of the Bay Area to being a respected brand pushing skateboarding across the globe. Their SF flagship sits in the famous Haight Ashburry district, always attracting visitors and giving them a look into what skateboarding is really like in this day and age. FTC will have you covered in their own gear, and will also always be pushing the next big thing in their shops, and they never make a bad call.


Element is of the most mainstream brands in the industry today that has sponsored legends like Nyjah Huston and Bam Margera.  There are many pro decks to choose from with some amazing tribal designs and they have introduced a “featherlight” technology that allows Element to have some of the lightest boards on the market today.  Some may call Element “too mainstream” or “sellouts”, but at the end of the day, they produce quality products in a variety of artistic designs.
The “popsicle” deck is the most popular shape because of its versatility and durability. These decks resemble the shape of a popsicle stick because they feature both a nose and a tail that are exactly or nearly symmetrical. Since the nose and the tail are shaped about the same, it’s easy to do tricks no matter which direction you’re headed in. Most skateboarders stick to popsicle decks because of their functionality and reliability.

Even in their amazing collection of skateboards, extensive research helped us uncover the best skateboard of Powell Peralta for you guys. It is the top skateboard of Powell Peralta in terms of the amazing value it offers to its customers. With that said, we present to you the Powell Golden Dragon Flying Dragon. Let me tell you this, the users of this product are in LOVE with it.
The Rimable Complete 22″ Skateboard is the most compact street board that are ready-to-use.  It is best for exercise and fun, and very portable.  There are five colors that you can choose from Black, Blue, White, Purple, and Green.  It has high-quality construction, with a high-density plastic deck.  It features extremely smooth 59mm wheels along with ABEC7 bearings and solid aluminum trucks.  It measures 22″ long and 6″ wide and weighs 4 pounds.  It has the best rating of 4.3 on Amazon.
Skateboards just aren’t what they used to be, and that doesn’t make Jim Greco, Baker and Deathwish OG, happy whatsoever. Greco started the company last year as an effort to bring back skateboard manufacturing to the USA from overseas in China, using the traditional silk screen ink transfer and hand shaping methods from the early days of skateboarding.
Of course, 2015 also stands for a line of new companies that drew a lot of attention on them and we are talking about some serious game-changers here. There was Sour Skateboards, who had an incredible launch (or are we talking of a comeback?) as well as Isle Skateboards (did you hear about the Bright European Skateboarding Awards 2016?), Krooked and many more. We are hyped for this year and can’t wait to explore whatever there is to come with all of you guys! We would love to know your opinion. Which are your favorite deck brands. Feel free to comment below.

Their fan base loves them for pushing goofy but fun looking skating that in reality is heavier and rawer than most will realize, and their board graphics and t-shirts feature art from their riders in striking colorways. Their product immediately stands out among the bunch at any shop it’s stocked. These guys are doing things exactly their way, and it’s sticking.
Skateboard hardware is used to connect the skateboard trucks to the skateboard deck. Skateboard hardware refers to the bolts and locknuts used when building a board. The bolts can have an Allen or Phillips head. Skateboard hardware comes in many different lengths, and often includes one different colored bolt so that the rider can mark the nose of their board.
Moose boards are very solid in all categories. They are low priced, available in a variety of different shapes and sizes, and have been around for a while so they’ve built up a reputable brand name. You won’t go wrong buying a pack of Moose blanks if you’re the type of guy that goes through decks quickly or is looking to resell them at your local skatepark.
In the skateboarding industry, brands tend to come and go with ease. It’s rare for them to stay in the spotlight for any substantial amount of time. But the constant reshuffling of the deck (pun not intended) allows for a rotation of new brands to make a name for themselves. Whether they’re known primarily for their skateboarding parts essential to the craft (like decks, trucks, wheels, and shoes) or for their apparel and accessories, the skateboarding universe has been expanding ever since the sport caught the attention of the mainstream in the late ‘90s. Everyone may remember exactly where they were when Tony Hawk landed the 900° on national television, but the world of skateboarding brands is much larger than just that and more expansive than you may realize.
A “razor tail” is the term for when the tail of the skateboard deck becomes sharpened and worn due regular use and scraping the tail of your skateboard on the ground to stop.  When your deck gets razor tail, its becomes a weapon against you and anyone need you while you’re skating as being hit with a sharpened tail is very painful.  To avoid this from happening, you could buy a carbon fiber deck that may be more resistant to wear, but more importantly you should not scrape your tail to stop.  Instead you can lightly place one foot or toe down to slow your speed or powerslide to a stop.
Canadian maple wood decks are the industry standard and is what the vast majority of decks on this list will be made of.  However, is the seller just says “maple” the deck is typically made in China and the wood may be slightly softer and lower quality.  This is more common among the lower cost blank decks, and most pro brands or higher end blanks are typically 100% Canadian maple.  In my opinion, the difference between Canadian and Chinese maple decks is slight and in many cases, a cheaper Chinese deck may be the better option for you if you have a small budget or tend to go through decks very quickly.
^ Jump up to: a b Rosenberger, Robert (June 19, 2014). "How Cities Use Design to Drive Homeless People Away: Saying "you're not welcome here"—with spikes". The Atlantic. The Atlantic Monthly Group. Archived from the original on July 1, 2014. Retrieved April 23, 2017. An example of an everyday technology that’s used to forbid certain activities is “skateboard deterrents,” that is, those little studs added to handrails and ledges. These devices, sometimes also called “skatestoppers” or “pig ears,” prevent skateboarders from performing sliding—or “grinding”—tricks across horizontal edges. A small skateboard deterrence industry has developed, with vendors with names like “stopagrind.com” and “grindtoahault.com.”
Skateboard hardware is used to connect the skateboard trucks to the skateboard deck. Skateboard hardware refers to the bolts and locknuts used when building a board. The bolts can have an Allen or Phillips head. Skateboard hardware comes in many different lengths, and often includes one different colored bolt so that the rider can mark the nose of their board.
Hey, are you looking to have a great fun with a fantastic ride? If YES, then skateboard will be the best option for you by all means to actualize all of your dreams. Skateboarding is an effective form of physical exercise as well as it saves your money also when you use it for going to your near destination on a busy road. Therefore, if skateboarding is your passion and if you are looking for the best skateboards, then with this in mind you are in the right place, my dear.

Since its inception in 1990, Alien Workshop has gone through a number of changes of ownership, first being bought by Burton Snowboards in February 2008, then purchased from Burton by original Alien Workshop rider and reality TV show star Rob Dyrdek in January 2012. Following Dyrdek’s purchase of the brand and its umbrella company DNA Distribution, (also incorporating Habitat skateboards, Habitat footwear and Reflex bearings), an announcement was made in October of 2013 that Dyrdek would remain as a minority shareholder of DNA Dist, with the majority of shares purchased by Pacific Vector Holdings, (also owners of No Fear clothing and Gatorz sunglasses).
×