Manufacturers started to experiment with more exotic composites and metals, like fiberglass and aluminium, but the common skateboards were made of maple plywood. The skateboarders took advantage of the improved handling of their skateboards and started inventing new tricks. Skateboarders, most notably Ty Page, Bruce Logan, Bobby Piercy, Kevin Reed, and the Z-Boys started to skate the vertical walls of swimming pools that were left empty in the 1976 California drought. This started the "vert" trend in skateboarding. With increased control, vert skaters could skate faster and perform more dangerous tricks, such as slash grinds and frontside/backside airs. This caused liability concerns and increased insurance costs to skatepark owners, and the development (first by Norcon, then more successfully by Rector) of improved knee pads that had a hard sliding cap and strong strapping proved to be too-little-too-late. During this era, the "freestyle" movement in skateboarding began to splinter off and develop into a much more specialized discipline, characterized by the development of a wide assortment of flat-ground tricks.
Typically when looking at different completes you will see size dimensions in the format of ~7-8 x 31-34″. This measurement is referring to the width and length of the skateboard deck. Typically all other parts are relatively standard and the deck size is the main thing to look for. Standard skateboard widths for beginners are between 7.5-8.25 with smaller boards being better for younger and smaller guys. You don’t really have to worry about length much as long as it’s shaped regularly. You may hear about the concave of the deck or a special type of board construction, but for the most part, it will not matter much to a beginner. If you have no idea what size would be best you will never go wrong with a 7.5 or 7.75.
Be sure to purchase from a reputable source. Buying online might save you a few dollars, but try your local skate shop first. The few extra dollars you spend support the shop and your local skate community. Developing a good relationship with a local skate shop often saves you money in the long run. The completes are not as good as custom made, but you can get them for a lot less money and upgrade any bad components later.
This past year, they dropped the insant classic VHS series of decks, playing off of the nostalgia of old blank VHS tapes used to film back in the 90’s, creating a high demand for restocks in skate shops across the world. This series almost singlehandedly brought them back in the forefront of skating to the world beyond New York, and we can only wait to see what they’ll do next.
Modern decks are made with a composite of thin layers of either maple or bamboo pressed into a near symmetrical shape with a nose equal to or longer than the tail. The deck should be concave (subtle U shape) along the whole board with both the nose and tail angled upwards (the "kick" of the board). Conceptually while the skateboard is a platform, it also serves to cup the balls of the skater’s feet with rising sides, nose and tail providing the foundation for pretty much all modern skateboard tricks.
Flip Skateboards is a high-level skateboards company that moved from the UK to California to take advantage of the American skateboarding industry. It was launched in 1991 by Jeremy Fox and by professional skateboarder Geoff Rowley, both of whom are from the UK. They both knew that to achieve the highest levels as a skateboarding company it was important to gain the recognition one can only get in the U.S. Furthermore, in 2017, Flip partnered with the European skateboard production and distribution company HLC. The decks of Flip Skateboards are made from 7-ply maple. Customers can enjoy the standard decks as well as the P2 models which are made with an oval-shaped fiber reinforcement panel which makes them extra durable. Psychedelic designs adorned many of the Flip skateboards as well as other designs. The Flip team has 15 professional skateboarders, including names such as Tom Penny, David Gonzalez, and Luan Oliveira.
A 100% genuine Penny board. It is a complete skateboard featuring classic design. Its design reference comes from 1970s boards. It replicates the retro era skateboard. Its small size makes it an ideal cruiser providing you with ease of using it anywhere. Whether commuting to your school or surfing along with friends, Penny Complete Skateboard provides a smooth ride. It is lightweight and easy to carry around as well. It can easily bear heavy weight and will not give in. You can easily master your skateboarding skills and become a pro using genuine Penny Australia Classic Complete Skateboard.
There followed a video release containing a remix of archive footage of Glaswegian born ex Blueprint pro skater Colin Kennedy who was awarded a guest board by The National Skate Co in 2015 that referenced an earlier Irn Bru graphic of Kennedy’s released in 1996 during his time on Panic Skateboards. Additionally, The National Skate Co released another limited edition homage series of product to celebrate the classic 1997 UK video Playing Fields with the blessing of those involved in making the video originally.
Element, based out of Irvine, CA, is one of the cool skateboard brands today. They came in first on our list due to their quality boards, sustainable practices and the affordability they offer customers. They’re an environmentally responsible brand who creates their boards without causing any environmental damage. The Element team behind the company is comprised of a group of professional skateboarders who interact with a strong belief in the Element brand. They not only offer great products, but stand for an open minded and active lifestyle and have become one of the best skateboard brands in the world.
This deck is 6-inches-by-22.5-inches with that classic cruiser shape. The board is made with 6-ply bamboo and maple construction, which is lightweight, flexible, and eco-friendly. Bamboo Skateboards claims this board has a turning radius not seen in most mini decks. The small, blank deck is heavy duty and durable in a way not all mini cruisers are. This non-carbonized board is ready for you to slap on the grip tape and artwork you want and then get riding.
Spotting a poorly made skateboard deck can be hit or miss. Some toy skateboards don’t even try to look “real". They might have no concave to their shape and may not even have a extended nose. Others may be shaped to resemble a real skateboard, but are made with cheap woods and fillers. If that is the case, they may be both thicker and heavier than a quality board, or they may be ready to fall apart quite quickly and easily. Consider that it isn’t easy to make a real skateboard deck. Most legitimate skateboard decks will sell for somewhere between $35 - $55. If you are paying that much for the entire skateboard, it is unfortunately a sign that significant corners were cut on quality.
What’s important to consider here is choosing the length based on your riding needs. You might be a street rider and love to do some tricks. You probably need a short board with a narrow profile. Whereas the longboard is only recommended if you are a professional skateboarded and love to cruise around the town and want to improve your balance and stability.
Canadian maple wood decks are the industry standard and is what the vast majority of decks on this list will be made of. However, is the seller just says “maple” the deck is typically made in China and the wood may be slightly softer and lower quality. This is more common among the lower cost blank decks, and most pro brands or higher end blanks are typically 100% Canadian maple. In my opinion, the difference between Canadian and Chinese maple decks is slight and in many cases, a cheaper Chinese deck may be the better option for you if you have a small budget or tend to go through decks very quickly.
FTC has grown from being the staple skate shop of the Bay Area to being a respected brand pushing skateboarding across the globe. Their SF flagship sits in the famous Haight Ashburry district, always attracting visitors and giving them a look into what skateboarding is really like in this day and age. FTC will have you covered in their own gear, and will also always be pushing the next big thing in their shops, and they never make a bad call.
They have continued to ride that wave over the past year, continuously putting out great edits, following cherry up with Sickness, Red Devil, Joyride, and Swoosh, all in collaboration with cherry’s filmer Bill Strobeck. We all know they will never fall off when it comes to putting out fire gear every new season and drop, but to keep it coming with actual great footage is another story, and is definitely making skateboarding better today.
Sizing plays an important role in the performance of any deck. A large majority range in size from 7.75" to 8.5" in width. These will provide a great platform for shredding any obstacle and will excel in street and skatepark environments alike. For those who prefer a smaller board, decks are offered down to 7.5" in width- benefiting people with smaller feet or the technical skater. Conversely, those looking for a wider board will enjoy our selection ranging up to 8.9" wide. Larger decks will accommodate those with very large feet, as well as offer an amazing experience for cruising and shredding large ramps and transitions.
It’s a beautifully designed affordable skateboard that provides an optimum ride for both amateurs and pro riders. Its high-rebound, hand-cast polyurethane wheels are built to deliver best roll and grip during an action. Its 7.625 inches wide and 31.625 inches long top board offers ample grip and stable ride for the beginners who are still learning to stand while riding without any fear of slipping off the board. Its colorful screen-printed bottom lets you ride in style. It is built to meet demanding specifications.
The nose and tail of a standard skateboard curve upward slightly to make tricks easier to perform. On most decks, the nose and tail are shaped slightly different. The nose is usually wider, longer and steeper than the tail which aids in nose-based (nollie) tricks, and also helps you differentiate the nose from the tail. Some shaped boards have very different nose and tail dimensions, and some old school boards lack noses all together.
Sending sincere thanks to everyone that supported us over the last decade – including team riders, fans, customers, photographers, filmers, & mags. Thanks to George & Juli Powell & everyone at Skate One Corp. who believed in us & helped facilitate our vision. Thanks most of all to Cara-Beth Burnside for whom without her influence, leadership, & no-bullshit-spirit none of this would have ever been possible.
I really recommend searching up a local skate shop man. Get a shop deck instead of a company deck ya you look cool.with a gold primitive deck but all skateboards do the same thing.shop decks are much more cheaper With really good quality wood too, your shoe size don't matter at all my friend is 6' with a size 13 shoe and rides a7.75 lol. But the smaller the board the easier to flip the board with tricks. A more wider board gives you more room to land on doing stairs and gaps. Me i ride a8.25 i love it but at times i feel like riding an 8.1. Most local shops will give you a free sheet of griptape instead of wasting like 10$ on one. Trucks i recommend thunder hollow lights. They're so light on you skateboard and are durable. Hardware are the bolts that hold it all together i really like having colored ones so i can tell the nose and tail of the board. Wheels get spitfire man street tech formulas i love them so much about 25$ though. It's worth it tho. Bearings you can spit fire bearings too thet are ok but the more expensive the bearings the better. There's also bones red bearings another great bearing brand. In total cost bro it should come to around 120$ or just a slight bit more. For skate shoes always get sued shoes they last way longer and have better grip. To learn the basic tricks go to YouTube and look up braille skateboarding. He teaches you the basics very clearly and detailed where to put your feet and stuff. Not only that YouTube channel look at different skate videos youll get inspired to land that trick too. Skateboarding is sick bro no one tells you how to skate you know it's pure freedom. Hopefully you get a mean Ass setup man and get to skating!!! Remember skate or die !!!!
Without good grip tape, skaters have a tough time staying on top of their board. The main complaints about poor grip tape tend to be that it was never very grippy or lost its grip really quickly. Once again, we recommend trusting in name brands with years of experience supporting skateboarders. Unfortunately, if you are buying a pre-made complete skateboard, you probably won't have access to the brand name of the grip.