Canadian maple wood decks are the industry standard and is what the vast majority of decks on this list will be made of. However, is the seller just says “maple” the deck is typically made in China and the wood may be slightly softer and lower quality. This is more common among the lower cost blank decks, and most pro brands or higher end blanks are typically 100% Canadian maple. In my opinion, the difference between Canadian and Chinese maple decks is slight and in many cases, a cheaper Chinese deck may be the better option for you if you have a small budget or tend to go through decks very quickly.
Great option for a beginner who wants a pro deck and doesn’t mind non-pro branded parts. Enjoi is very well known by skateboarders and the panda logo will be recognized everywhere. This particular deck is 7.75″ wide which is why I think it’s the best as it can be skater by any size person comfortably. One slight downside to this setup is that the board comes unassembled, however many skaters enjoy putting together their own skateboards and it can be done in just a few minutes by following a YouTube video. You won’t go wrong with such a well-respected brand and average size, this is actually the exact skateboard I decided to buy for my nephew a few years ago and he absolutely loved it!
Go for the low truck profile if you want to obtain additional stability when you do flip tricks. It also works well for small wheels. The mid-sized trucks are good for all-around use, especially in streets and parks. You can also choose the high-sized trucks that are good for carving and cruising, which is the reason why they are perfect for huge wheels.
In the early 1970s skateparks hadn't been invented yet, so skateboarders would flock and skateboard in such urban places as The Escondido reservoir in San Diego, California. Skateboarding magazine would publish the location and Skateboarders made up nicknames for each location such as the Tea Bowl, the Fruit Bowl, Bellagio, the Rabbit Hole, Bird Bath, the Egg Bowl, Upland Pool and the Sewer Slide. Some of the development concepts in the terrain of skateparks were actually taken from the Escondido reservoir. Many companies started to manufacture trucks (axles) specially designed for skateboarding, reached in 1976 by Tracker Trucks. As the equipment became more maneuverable, the decks started to get wider, reaching widths of 10 inches (250 mm) and over, thus giving the skateboarder even more control. A banana board is a skinny, flexible skateboard made of polypropylene with ribs on the underside for structural support. These were very popular during the mid-1970s and were available in a myriad of colors, bright yellow probably being the most memorable, hence the name.
The DreadXBoards Concave Skateboard has Plastic Deck Injection Molded for excellent durability. It features Urethane Wheels 59mm 78a, aluminum trucks, and Abec 7 Bearings. It is completely assembled and is ready to ride. It is perfect for beginners or experienced riders. It can load up to 185 lbs. It is great for kids and adults. It has an excellent rating of 4 on Amazon.
With distinctive graphics, often touching upon controversial issues such as racism with American society such as the infamous Jim Thiebaud ‘Lynch the KKK’ graphic designed by Natas Kaupas and Kevin Ancell, and classic Jeff Klindt graphics such as the James Kelch ‘James’ board, which was recently re-released, Real’s aesthetic has always been instantly recognisable.
You seem to love Toy Machine deep in your heart! Ed Tempelton’s brand did well this year and landed four places above last year’s ranking. In addition to many other exhilarating designs, the Turtles deck series was the most acclaimed one. The quality is proven by team riders such as Leo Romero, Collin Provost, Daniel Lutheran and Co. You can get your Toy Machine deck from 59.99 € | 50.00 GBP!
As it eventually became more apparent that skateboarding had a particular identity with a style of shoe, other brands of shoe companies began to specifically design skate shoes for functionality and style to further enhance the experience and culture of skateboarding including such brands as; Converse, Nike, DC Shoes, Globe, Adidas, Zoo York and World Industries. Many professional skateboarders are designed a pro-model skate shoe, with their name on it, once they have received a skateboarding sponsorship after becoming notable skateboarders. Some shoe companies involved with skateboarding, like Sole Technology, an American footwear company that makes the Etnies skate shoe brand, further distinguish themselves in the market by collaborating with local cities to open public Skateparks, such as the etnies skatepark in Lake Forest, California.
Well know for their creative cartoon graphics and high-quality deck construction, this Toy Machine complete is another great starting skateboard for beginners. This deck is slightly larger than 8″ so it would be perfect for adults or people with larger feet who want a more stable ride. This setup is another good example of generic parts with a pro quality deck for a very reasonable price. A great option for a beginner who loves the logo and graphic, but wants to save money on the less important parts until they decide they want to take their skating the to next level.
Ridge Skateboards For Beginners are a UK Brand and have taken over Europe. Now it is available in the U.S.A. exclusively through Amazon. The Deck measures 27″ long x 7.5″ wide (69cm x 19cm). It features 4″ wide high-performance trucks with 87A super soft yellow bushings. It is made of high quality secret plastic formula. It has a rating of 4.8 on Amazon.
The Krown Rookie Skateboard Complete 7.5 comes with thick, sturdy 7-ply maple wood deck. It gives you more control and permits you to perform various tricks. It features carbon steel ABEC-3 bearings, aluminum trucks, bushings and 54mm x 34mm wheels. This board is perfect for kids who are 8 years and older. It has a maximum weight capacity of up to 220 lbs.
Severe injuries are relatively rare. Commonly, a skateboarder who falls suffers from scrapes, cuts, bruises, and sprains. Among injuries reported to a hospital, about half involve broken bones, usually the long bones in the leg or arm. One-third of skateboarders with reported injuries are very new to the sport, having started skating within one week of the injury. Although less common, involving 3.5–9 percent of reported injuries, traumatic head injuries and death are possible severe outcomes.
In summary - recognizing a real skateboard isn’t rocket science, but it does take some amount of brand awareness and ultimately even trial and error. We tried to take the guesswork out of it by starting SkateXS and openly sharing and celebrating each and every component we use to build our skateboards. Hopefully we have been able to share the values and priorities we put into those design decisions.
The Golden Dragon 2 can also reach very high speeds thanks to the smooth ride skateboard wheels that have been incorporated into the design. Many people report this skateboard to hold up very well, even after several seasons and years of use. This makes them perfect skateboards for adults and kids that are looking to use the board very regularly for practice purposes.
As the name implies, pro skateboard decks are decks made by well-known skateboard brands that typically feature graphics or logos related to a specific team rider. Usually, pro decks are more expensive than team decks of the brand and much more expensive than blank decks. The increased cost goes to the pro skater and it’s a way for the buyer to support their favorite skaters and brands. Pro street decks are almost always Canadian maple, besides a few carbon fiber exceptions and they are the most commonly purchased decks see in skateparks and on the streets worldwide.
^ Jump up to: a b Rosenberger, Robert (June 19, 2014). "How Cities Use Design to Drive Homeless People Away: Saying "you're not welcome here"—with spikes". The Atlantic. The Atlantic Monthly Group. Archived from the original on July 1, 2014. Retrieved April 23, 2017. An example of an everyday technology that’s used to forbid certain activities is “skateboard deterrents,” that is, those little studs added to handrails and ledges. These devices, sometimes also called “skatestoppers” or “pig ears,” prevent skateboarders from performing sliding—or “grinding”—tricks across horizontal edges. A small skateboard deterrence industry has developed, with vendors with names like “stopagrind.com” and “grindtoahault.com.”
Another bonus of shopping at an actual skate shop is that you get to see what the boards look like in person. Most skate shops will have a cool wall of boards, and it's fun to just stand there and look at all the graphics. If one jumps out and grabs you, then you can ask the shop owner about the brand, and whether it's a good one. There's nothing wrong at all with buying a skateboard deck because you like the graphics!
One thing can already be told – compared to 2015 a lot has changed! The selection of the ‘Brands of the Year’ is made up of the combination of sold decks, brand shop visits, search queries and your interest in blog entries regarding the top players in the business. Our own brand SK8DLX was not considered for the ranking. We are happy, however, that you love to skate our in-house boards diligently and the SK8DLX deck series is celebrated well. In this sense, a big thank you to you all! Let’s start with the 16 most popular skateboard deck brands of 2016!
After leaving long time sponsor Birdhouse due to a feeling of dissatisfaction at the manner in which he himself was being marketed as a pro skater, Andrew Reynolds joined forces with a group of similarly aged pro skaters, who at the time, all lived close to each other in Huntington Beach, California in the Warner Ave housing complex and resolved to turn what had formerly been a loosely affiliated crew into a skateboard brand. Reynolds approached Tony Hawk and Per Welinder, owners of Blitz Distribution (and distributors of Birdhouse) with his idea and, rather than losing Reynolds completely, Blitz Distribution agreed to assist Reynolds with Baker and to distribute it.
If you are looking to buy a reliable skateboard that will keep you busy for years to come, the Whitey Panda is the ideal choice. It’s a very good entry-level skateboard that can be put through a lot of wear and tear. The solid, metal skateboard trucks ensure that you will be kept sturdy and safe both on and off the ground. This helps the rider feels more confident when doing tricks, no matter where they are.
Aside from their prodigious online output since the release of their last full-length video, (often via Daewon Song’s own Instagram account which currently has close to a million followers alone), Almost are also renowned for their experiments in board construction technology – in particular the Almost Impact Support range and the Über Light series which incorporate carbon-fibre into skateboard construction to reduce weight and increase strength/flex.