From cheap skateboards to high end, custom complete skateboard decks, we have boards for riders of every skill level and tax bracket - we get it, we put skateboarding before everything else first. If you can’t always afford a new board, but go through decks like toilet paper, consider a CCS Skateboard - they cost less, but are manufactured in the same factories as other brands we carry. CCS Skateboards are held to the same standards as every skateboard we sell, but we can sell them for less.
Following The Real video, the brand released full-length videos at regular intervals, with each release being celebrated as a classic overview of the era involved. 1997’s Non-Fiction, featuring founder Jim Thiebaud and a revamped team including the likes of Mark Gonzales, Keith Hufnagel, Joey Bast, Drake Jones and one-time Real female rider Jamie Reyes is seen these days as one of the precursor’s of skateboarding’s general shift away from unbridled technical progression towards a heavier emphasis on style.
Pro decks are what most people are familiar with and what is seen most commonly around skateparks and driveways around the US.  These decks can have a variety of different logos and images on them and sometimes are a specific professional skater’s pro deck.  Pro decks provide skaters a way to support their favorite riders and have the same equipment they see all their favorite pros using.  The quality of professional decks and parts are almost always very high as they have a reputable and brand image to uphold.  For this higher level of quality and you can expect to pay 2-3x the cost of a blank complete.  If you want to save some money and still have a pro look, there are options available that have generic blank parts with a pro deck.  This may be a good option for a beginner skater who is not yet doing complex tricks that may break these cheaper parts, but they still want the look and feel of a pro skateboard.  As the skater progresses they can then switch out these generic parts for higher-end options as necessary.

Zero Skateboards is one of the American top companies for skateboards that comes out of California. The brand, representing by a skull logo, was founded by professional skateboarder Jamie Thomas and is distributed by Dwindle Distribution. The Zero brand is about rebellion and freedom of expression despite society’s rules. The company offers complete skateboards that come with the deck, wheels, trucks, and bearings, as well as decks you can customize, accessories and clothing. In addition to Thomas, the Zero team is Tommy Sandoval, Dane Burman, James Brockman, Tony Cervantes, Windsor James, Adrian Lopez, Chris Wimer, and Kurt Hodge.
Skateboarders like things that aren't skateboarding, too, you know. Camping, fishing, motorcycles… Uh, skateboarding? Crap. Whatever. Pro skater Adrian Lopez founded Loser machine and the Dark Seas Division as a way to explore other facets of the culture through cool clothing. Loser Machine is a complete collection that goes far beyond that typical tees, jeans, and hats formula that many skate apparel brands rely on—leather motorcycle gloves, denim vests, and floral print button-downs are all evidence that this is a well-conceived project from a skater with good taste.
A precursor to the extreme sport of street luge, that was sanctioned by the United States Skateboarding Association (USSA), also took place during the 1970s in Signal Hill, California. The competition was called "The Signal Hill Skateboarding Speed Run", with several competitors earning entries into the Guinness Book of World Records, at the time clocking speeds of over 50 mph on a skateboard. Due to technology and safety concerns at the time, when many competitors crashed during their runs, the sport did not gain popularity or support during this time.[36][37]

Phantom 2 trucks have a low profile, are lightweight and have a nice smooth edge for grinding. They also just look nice. The thing that sets Phantom trucks (both regular Phantoms and Phantom 2s) are their built in shock pads. Phantom calls it an "Impact Dispersion System," a 1.5 mm rubber shock pad built onto the bottom of the trucks. Shock pads help reduce stress from the trucks to the board.

Bianca Chandôn’s offerings can be found in high-end shops like Trés Bien and Supply, while Call Me 917, the sister company focusing on producing skateboards and hosting a skate team can be found mostly at select skate shops, such as New York’s own Labor Skateshop, but is also stocked at elite retailers like Dover Street Market. This brand duality allows Olson the freedom to explore new fields like cut-and-sew and womenswear with Bianca, while staying true to skateboarding with Call Me 917.
The Quest can be considered as the best improving Longboard brand because in 2014 it was in the 4th position, whereas in 2018 it is in 2nd place. This is a good improvement for a Longboard brand in these competitive days! Even though it is now in 2nd place, it has a little gap with Sector 9. They mainly focused on the customer’s needs by collecting client opinions. They have been improving the size, quality, performance, speed, design, and color of their longboards.
The wheelbase of a skateboard deck is the distance between the centers of the inner most truck mounting holes. This distance ranges between 13.5 to 16 inches and is generally proportional to the deck length on standard popsicle decks. Some specially shaped boards and cruiser decks have differing length/wheelbase ratios. Wheelbase can impact stability and turning radius, but the effect is often subtle and not a major concern for a beginner.

Many parents and grandparents visit SkateXS for their young one’s first “real” skateboard with the same fundamental quality questions. I realized we could certainly do a better job of making sense of it all! So with a bit of karmic appeal that someone will someday finally explain unicycles to me, here is a summary of something we actually know a thing or two about! 
Choosing a skateboard deck is a great place to start when building a complete skateboard. Unless you have experience riding a shaped board - something a little more retro or unusual, we recommend you start with a popsicle shape. CCS carries over 60 different skateboard deck brands that sell this popular popsicle shape. If you have questions on what size you should ride or have any other questions about building a complete, we recommend you check out our Skateboard Buyer’s Guide. Here, you’ll find helpful how-to’s for choosing a skateboard decks, skateboard trucks, skateboard wheels, skateboard bearings, and skateboard components. This guide explains every part of a skateboard and helps you choose which sizes and styles to best suit your needs.
Harsh weather, cracked pavement, angry cops—all things that make Raw New England just so raw. The name is also an acronym for Ready Amongst Willing—a perfect moniker for one of the East Coast's toughest brands. Raw's product drops aren't quite as frequent or bountiful as some other brands on this list, but the decks, tees, hoodies, and caps with the bold RAW logo are must-haves for New England's skate crowd. Visit the brand's shops in Boston or in CT to get the goods in person.
The G & S video ‘Footage’ (created by Mike Hill and Neil Blender and released in 1990 just prior to them leaving to start their own brand) set the precedent for Alien Workshop’s later video aesthetic with the use of non-skate footage intercut throughout the skate sections and the mysterious, almost otherworldly atmosphere that permeates all of Alien Workshop’s subsequent video releases. To many people ‘Footage’ is the pre-cursor to every Alien video release that followed in its wake.
The laws for skateboarding helmets vary from state to state. Many states require that skaters wear a helmet under a certain age, and some states like California make all skaters under 18 wear a CPSC Certified helmet at all times. CSPC skateboard helmets usually have an EPS protective liner that meets the safety standards for skateboarding. Make sure you check your state's regulations before ordering.
If you have a great passion for the downhill ride as well as cruising and you are a beginner of longboarding, then ultimately, this board can satisfy your needs. It’s a versatile board as you can use it for cruising and downhill riding. The board is equipped with the perfect wheel size — not so big and not so small. It is big enough to give you a smooth ride but it is not too big to get wheel bite. Isn’t it cool? The 44 inches size of its wheels is perfect for comfortable cruising as well as riding downhill. It has some flex which will reduce the stress on your ankle and knees.

FTC was cool before there were skate and hype blogs around to tell you that they were cool. Mastermind Kent Uyehara built his brand from the back of a sporting goods shop into an international symbol of cool, with franchise locations in Sacramento, Tokyo, and Barcelona. FTC isn't just the go-to spot for skate gear in those cities-it's a full-blown brand that any skater would be proud to wear.

They have continued to ride that wave over the past year, continuously putting out great edits, following cherry up with Sickness, Red Devil, Joyride, and Swoosh, all in collaboration with cherry’s filmer Bill Strobeck. We all know they will never fall off when it comes to putting out fire gear every new season and drop, but to keep it coming with actual great footage is another story, and is definitely making skateboarding better today.
Aside from keeping the more fashion-oriented side of skateboarding placated with ultrasoft crewnecks and clean 6 panel caps, Dime keeps the side of skating focused on actual footage and hijinks fed through their Instagram and Snapchat accounts (@dimemtl), where they post their day-to-day in Montreal doing what skateboarders do best: having fun with their friends.
Individuality and a self-expressed casual style have always been cultural values for skateboarders, as uniforms and jerseys are not typically worn.[88] This type of personal style for skateboarders is often reflected in the graphical designs illustrated on the bottom of the deck of skateboards, since its initial conception in the mid seventies, when Wes Humpston and Jim Muri first began doing design work for Dogtown Skateboards out of their garage by hand, creating the very first iconic skateboard-deck art with the design of the "Dogtown Cross".[89][90][91]
A skateboard consists of a deck, trucks, wheels, bearings, hardware, and griptape. All parts come in a variety of sizes, graphics, colors, and signature pro series. The deck is the essential part of any skateboard. The deck ranges generally from 7.5" to 8.5". Skaters choose their board size for many reasons, but the basic deciding factor comes down to style of skating and foot size. Transition skaters usually ride a wider deck, while street skaters tend to go with a smaller deck. Skate brands such as Girl, enjoi, and Welcome offer a wide range of boards in regards to sizes and graphics. Skateboard trucks come in either a high or low setting, and also in a range of widths. The main factors in a truck, are how well they turn, and how well they grind. Independent, Venture, and Thunder, are truck brands that are well known for their turning and grinding capabilities. The skate hardware is generally either Phillips head or Allen key bolts. The skateboard wheels range from 50mm to 60mm. Some brands offer smaller and larger sizes, but 50-60mm is the general range. Like the deck sizes, wheel sizes depend on the skater's choice of terrain: Transition skaters tend to ride bigger wheels, while street skaters usually go with smaller wheels. Bones, Spitfire, Ricta, and Wayward wheel companies all make wheels for any terrain, whether you're a street shredder or a park burner. Skate bearings follow the ABEC rating system, which includes grades 1, 3, 5, 7, and 9. Bones, Bronson, and Andale are some of the top bearing brands in the skate market. CCS proudly carries all these brands, and many more.

Skateboard hardware is used to connect the skateboard trucks to the skateboard deck. Skateboard hardware refers to the bolts and locknuts used when building a board. The bolts can have an Allen or Phillips head. Skateboard hardware comes in many different lengths, and often includes one different colored bolt so that the rider can mark the nose of their board.
George Powell continued in business as the Powell Corporation and the brand released numerous videos throughout the 90’s and 00’s, including titles such as Suburban Diners (1994), Scenic Drive (1995) and FUN (2009), whilst simultaneously kick starting the careers of many skaters who went on to become household names such as Chris Senn, Adam McNatt and the UK’s own Danny Wainwright, along with stalwart Bones Brigade member Steve Caballero who stayed with the Powell brand throughout.
You may think that this is a cheap board with a low quality. If you are, then you are certainly wrong, my dear. It has soft wheels which will help you to get stability when riding. It also takes less effort to push the board because the deck is low compared to the other boards. Henceforth, it is the most comfortable board to ride for the beginners.
Element has also diversified their business model with ventures into retail with Element stores across the globe, advocate programs supporting artists such as Thomas Campbell and Fred ‘French Fred’ Mortagne, Women’s fashion through the Element Women’s range and the most cohesive approach to supporting European skateboarding of any brand in the industry through their dedicated European team.
×