'90s nostalgia is the name of the game. VHS tapes. Grimey hip-hop. Drinking forties, smoking blunts, skating filthy street spots at night, and general hooliganism are cornerstones of skateboarding's mid-90s golden years, and Palace is all about that life. No wonder you see the tees and skate decks stocked at Supreme, the only brand that compares to Palace when it comes to nailing that “fuck it” aesthetic. Palace gear has been causing an uproar lately—yes, Palace was on that designer parody tee shit before everyone else, and yes, the collab with Umbro was one of the best we've seen in years—but make no mistake the brand is skate to the core, and no amount of hype will change that. Let's hope, anyway.
TIP: Extra width and short noses make old school boards more difficult to flip or lift off the ground, so they are not ideal for street skating. With some old school boards, the truck mounting holes are drilled to only fit certain trucks, so make note of the truck pattern before you buy the deck. If you’re not sure your trucks will fit, just give us a call and we’ll figure it out. Shop Old School Compatible Trucks
This board also has a unique shape that makes it a lot easier to ease into turns, which is something that longboards aren’t always known for. It’s a lot easier to push off on this deck thanks to how low it sits, and you also get a one-year warranty from the manufacturer should anything go wrong. If you’ve never ridden on a board before, and don’t want to learn tricks right away, this is a great choice, especially if you’ll be riding around a lot of mostly flat areas.

Prior to the mid-seventies many early skateboards were originally based upon the concept of “Sidewalk Surfing” and were tied to the surf culture, skateboards were surfboard like in appearance with little to no graphics located under the bottom of the skateboard-deck. Some of the early manufactured skateboards such as "Roller Derby", the "Duraflex Surfer" and the "Banana board" are characteristic. Some skateboards during that time were manufactured with company logo's or stickers across the top of the deck of the skateboard, as griptape was not initially used for construction. But as skateboarding progressed & evolved, and as artist began to design and add influence to the artwork of skateboards, designs and themes began to change.[92]
There’s a bit of self-induced CONFUSION with Kryptonics inc. When they first came out, they made, literally, a Revolutionary Wheel, one that BOUNCED. That resilience made them VERY Fast on rougher surfaces, and perhaps even stickier (for a given hardness) than other wheels. You can buy that type of wheel (as a ‘Re-Issue’ “C-Series” in 55,60,65,70+75 mm sizes) now, and it’s STILL HIGH QUALITY, FAST, + STICKY! Even by today’s ‘longboard Race’ criteria, these are wheels to be reckoned with.

Mark Gonzalez created bLind Skateboards in 1989, and shortly after initiated a pro team for his skateboard brand. The bLind brand is known for higher durability due to their innovative features. The boards released by bLind are developed and marketed for hardcore skaters and top other skateboarding brands. We like that bLind goes all out providing one of the strongest boards out there, and without sacrificing the flex needed for tricks. They also do it all with a sick style and an innovative business plan that has made them one of the top skateboard brands.
Lewis Marnell became Almost’s first fully-fledged amateur, an addition announced in a bonus section of Almost’s ground-breaking mini ramp video ‘Almost Cheese and Crackers‘ from (2006) that focused upon Chris Haslam and Daewon Song’s pushing of the boundaries of mini ramp skating and has subsequently been credited with ushering in a new wave of technical transition skating in its wake.
The board itself is actually very portable in the sense that it only weighs a modest four pounds. Which means you can jump on and off in any situation that may warrant you to walk or ride. The ABEC7 bearings are top quality bearings and of the highest class. Also accompanying all of these fine features comes the kick-tail end of the board. This is to ensure that maneuvering and tricks can be performed with this utmost of ease.

Now given this guide is not for experienced and professional skaters, as per out brand rating criteria Plan B does not score that well mainly because of the issue that some skateboards come unassembled which can be overwhelming. If this were on an intermediate rider scale, then the brand score would have been much better. Anyways, here is the brand score of this amazing skateboard brand. 
Welcome is doing everything the way that people would probably tell you not to when it comes to how they run their board company. With no real full-length project out since it became a company, and with no pros to name, but boasting a full roster of official riders, Welcome is as unorthodox of a skate company as it gets. They don’t even make a single board in the traditional popsicle shape most boards are made today.
When you’re at the skate park or in a freestyle environment at a parking lot or structure, you want to have the most stability possible. You wouldn’t want your trucks cracking or a ball bearing spewing out during the landing of a nice front style 360 flip. If you’re in school, then choosing a skateboard brand for college while you’re away will be extremely easy given that this board is so very cheap and durable.
Founder Richard Novak is also widely credited as creating the skateboard industry as we know it today by establishing skateboarding as a separate culture and business by wrestling the sport away from the control of the roller-skating industry in the early 1970’s and promoting it through sponsoring events, supporting the nascent skateboard magazine culture, pioneering technologies within skateboard, truck and wheel construction and establishing the edgy cultural identity of skateboarding from the very beginning.
In the past decade, I have begun seeing the emergence of skate decks being totally or partially made from carbon fiber or other metal materials instead of solely wood.  These decks typically last longer than regular wooden decks and aren’t prone to chipping or breaking like most made from wood.  The drawback to these materials is that they tend to feel “stiffer” than traditional wooden decks and experienced skaters may feel they are heavier and harder to do tricks on.  Carbon fiber decks are also more expensive, but this additional cost may be worth it if you tend to break decks easily.  Some brands also offer warranties against breakage under normal conditions for carbon fiber decks if you are worried about breakage.

The Element Quadrant #14 board is 8-inches wide and 31.75-inches long, from nose to tail. This deck features a bare top that needs grip tape and a design on the bottom with four quadrants featuring the Element symbol in alternating red and black backgrounds. The wheelbase between the trucks is just over 14 inches while the nose is 7 inches and the tail is 6.325.


Skateboarding, in one form or another, has been around since the late 1950’s when the first brave pioneer first attached roller skate wheels to a piece of wood. As skateboarding progressed to mimic surfing, skateboards evolved with the style of riding. Skateboards grew and changed shapes as riders experimented with everything from plastic to fiberglass to aluminum constructions - all in an effort to push what was possible. Like most sports or art forms, progression is at the heart of skateboard innovation.
“We make 38 different proprietary shapes, and what is more important than the shape is the leverage that we design on each board. The mold we use, and where we drill on each mold is the magic. Do all popsicles ride the same? Of course not. We are a step beyond almost everyone with that because I am nerdy about how stuff rides and performs. This is what our riders skate and love, we aren’t trying to capture some demographic.
The Krown Rookie Skateboard Complete 7.5 comes with thick, sturdy 7-ply maple wood deck. It gives you more control and permits you to perform various tricks. It features carbon steel ABEC-3 bearings, aluminum trucks, bushings and 54mm x 34mm wheels. This board is perfect for kids who are 8 years and older. It has a maximum weight capacity of up to 220 lbs.
^ Jump up to: a b Rosenberger, Robert (June 19, 2014). "How Cities Use Design to Drive Homeless People Away: Saying "you're not welcome here"—with spikes". The Atlantic. The Atlantic Monthly Group. Archived from the original on July 1, 2014. Retrieved April 23, 2017. An example of an everyday technology that’s used to forbid certain activities is “skateboard deterrents,” that is, those little studs added to handrails and ledges. These devices, sometimes also called “skatestoppers” or “pig ears,” prevent skateboarders from performing sliding—or “grinding”—tricks across horizontal edges. A small skateboard deterrence industry has developed, with vendors with names like “stopagrind.com” and “grindtoahault.com.”

Magenta Skateboards are one of only a few mainland European based brand in this list, founded in Paris and currently based in Bordeaux, France. Magenta’s outlook on skateboarding as a cultural phenomenon, and consequently their output in terms of both products and video, is deliberately at odds with the prevailing conception of skateboarding as represented by most major brands.
Skateboarders from all over know Santa Cruz Skateboards for its “Screaming Hand” logo, designed by legendary artist Jim Phillips, and the monstrous artwork displayed on the decks, including series styles such as their Star Wars and Marvel series. Founded in 1973 and distributed by NHS, Inc., the California based brand is the oldest continuous skateboard company in the world. Santa Cruz boards are made from 100% North American maple and they offer complete skateboards, decks, and cruiser boards. The Santa Cruz Skateboards team consists of 16 professional skateboarders including names such as Blake Johnson, Dylan Williams, Emmanuel Guzman, and Eric Dressen.
In this in-depth guide, we’re going to cover how to choose the best skateboard for beginners, and review the top five beginner skateboards on the market right now. We’ll talk about how to choose the right size, what parts of a skateboard you should pay attention to, how to choose the right shape, choosing the right wheels, and more. First, let’s talk about the top five skateboards for beginners.
These boards are perfect! perfect shape (for me anyways) medium concave (which is better than deep or mellow in my opinion) perfect shape of the tail and nose, and have perfect pop (which last FOREVER) they're very durable too. Everything is perfect but why they're ranked so low is because not many people get deluxe boards than come here to write about how awesome they are.
“Skate well and look nice”! Our skateboard brands a-z list comprises of names diligently serving for years and competently showing expert results. Considering the price of skateboards as last benchers, we let “your efficiency” to rank the best in the race. Adding funk with fashion, our top skateboard brands list serves a mere embellishment to rock your performance. Available in vibrant hues and funky designs, we deal with skateboard brands performing the best in the industry. You can also choose the best skateboard according to your choice, in which we have explained all the top selling skateboard reviews for you.

Since its inception in 1990, Alien Workshop has gone through a number of changes of ownership, first being bought by Burton Snowboards in February 2008, then purchased from Burton by original Alien Workshop rider and reality TV show star Rob Dyrdek in January 2012. Following Dyrdek’s purchase of the brand and its umbrella company DNA Distribution, (also incorporating Habitat skateboards, Habitat footwear and Reflex bearings), an announcement was made in October of 2013 that Dyrdek would remain as a minority shareholder of DNA Dist, with the majority of shares purchased by Pacific Vector Holdings, (also owners of No Fear clothing and Gatorz sunglasses).
×