If you're in the market for a skateboard for your child, there are some general points to keep in mind: A complete skateboard is one that comes fully built, size doesn't matter, and as with all things you buy, you get what you pay for. Conventional wisdom says to go with a good-quality board that will last longer and is safer. Here are some good choices to check out.
This deck is 6-inches-by-22.5-inches with that classic cruiser shape. The board is made with 6-ply bamboo and maple construction, which is lightweight, flexible, and eco-friendly. Bamboo Skateboards claims this board has a turning radius not seen in most mini decks. The small, blank deck is heavy duty and durable in a way not all mini cruisers are. This non-carbonized board is ready for you to slap on the grip tape and artwork you want and then get riding.

In the early 1970s skateparks hadn't been invented yet, so skateboarders would flock and skateboard in such urban places as The Escondido reservoir in San Diego, California. Skateboarding magazine would publish the location and Skateboarders made up nicknames for each location such as the Tea Bowl, the Fruit Bowl, Bellagio, the Rabbit Hole, Bird Bath, the Egg Bowl, Upland Pool and the Sewer Slide. Some of the development concepts in the terrain of skateparks were actually taken from the Escondido reservoir.[27][28][29] Many companies started to manufacture trucks (axles) specially designed for skateboarding, reached in 1976 by Tracker Trucks. As the equipment became more maneuverable, the decks started to get wider, reaching widths of 10 inches (250 mm) and over, thus giving the skateboarder even more control. A banana board is a skinny, flexible skateboard made of polypropylene with ribs on the underside for structural support. These were very popular during the mid-1970s and were available in a myriad of colors, bright yellow probably being the most memorable, hence the name.


Distributed by NHS, Inc., Creature Skateboards was launched in 1994 by professional skateboarders Russ Pope, Jason Adams, Barket Barrett and Darren Navarrette. The company was revived in the mid-2000s. Creature is known for its horror themes on its skateboards and clothing. The company offers complete skateboards that include the decks, wheels, trucks, and bearings as well as customizable decks, and accessories. The Creature team includes 19 professional skateboarders. In addition to Navarrette, the roster includes such names as Al Partanen, Chris Russell, Cory Juneau and David Gravette.

In the early 1970s, Frank Nasworthy started to develop a skateboard wheel made of polyurethane, calling his company Cadillac Wheels.[7] Prior to this new material, skateboards wheels were metal or "clay" wheels. The improvement in traction and performance was so immense that from the wheel's release in 1972 the popularity of skateboarding started to rise rapidly again, causing companies to invest more in product development. Nasworthy commissioned artist Jim Evans to do a series of paintings promoting Cadillac Wheels, they were featured as ads and posters in the resurrected Skateboarder magazine, and proved immensely popular in promoting the new style of skateboarding.
Huf has come a long way since its humble beginnings slinging the best sneakers and streetwear in San Francisco's Tenderloin District. Keith Hufnagel and his team quickly outgrew the boutique niche and have becomea full blown skate apparel and footwear brand. Today Huf has a stacked teamed (including low-key legends like Joey Pepper, who recently got a signature shoe), a wildly popular range of product (weed socks, anyone?), and some hefty celebrity co-signs.
It was a slow start for 3D, who had Alex Olson bail on them when they first started out before they could even get their first run of boards inside of shops, leaving the company at just two riders: Brian Anderson and Austyn Gillette. Now, due at least partially in part to Brian Anderson’s solidified status as a skateboarding legend, 3D has taken off and become an established brand that’s not taking itself too seriously, but still putting on for skateboarding. 3Ds first video offering, featuring amateur rider Tom Karangolov in a dreamy pink colorcast world, has even showed that they’re looking to shake things up in the stale footage side of skateboarding.
The National Skate Co‘s approach to marketing retained this air of intrigue with the release of their first video, ‘The National Skateboard Co. Promo‘ in 2013 with minimal promotion beforehand. This promo video featured lo-fi VX2000 footage of original team members Thomas Harrison, Danijel Stankovic, David Mackey, Joshua Young, Vaughan Jones and Neil Smith interspersed with found footage and black and white news reel clips.
SkatesZone.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, SkatesZone.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.
As loosely defined as Bronze is, Peter Sidlauskus seems to be incapable of doing anything wrong in his marketing for the brand, endlessly putting out amazingly hilarious and gnarly New York based edits featuring a loose group of guys we can say make up their “team.” Bronze brings an aesthetic that falls somewhere between vaporwave and deepweb, and is always making gear that you can rock on the daily, from pink dad hats to coaches jackets. You might have even seen their flip of the Windows 98 logo on the backs of people like ASAP Nast.
It's too cold and dark to skate in Sweden for about six months out of the year. That must be when brand mastermind/artist Pontus Alv schemes on the global takeover he's been orchestrating for Polar. Not only are the brand's hats, tees, and hoodies some of the most coveted gear in the skate universe, the Polar team travels the globe hosting events, filming video clips, and getting people hyped on vigilante-style street skating. Look for Polar to come to your hood and build awesome, illegal concrete skate obstacles under a bridge, then bounce like gnarly, European skate tooth fairies. Good luck finding a tee or hat at this point—hype has made to goods rare, but let's hope as the excitement grows Mr. Alv will expand his distro.
In sports like football, cricket and swimming, you have to follow certain rules and adopt a particular style in order to perform well. But that’s not the case with skateboarding. This sport allows skaters to enjoy their unique style without any restrictions. From drills to cruising and rail tricks, you can do whatever you like in your very own created style. Everyone skates in their own style according to their convenience.
Alien Workshop is a Dayton, Ohio based company, established by Chris Carter, Neil Blender and Mike Hill in 1990. They have gone through several ownership changes, including a period of being owned and operated by Burton Snowboards, but have persevered and become one of the top skateboard brands today. Alien Workshop has faced several turbulent challenges with varying outcomes, however they have remained dedicated to providing a high quality, yet also affordable boards. We like Alien Workshop for their innovative designs and conscience effort to make a great board, that many can afford. Their high quality boards has allowed them to become one of the best rated skateboard brands today.
A good helmet protects your most important vital organ. Remember that in some states helmets are required by law. In Oregon, for example, skaters 15 and under can be fined for not wearing a helmet. Knee and elbow pads will also save you from bumps and bruises. Knee pads are particularly valuable when learning to skate tall vertical walls because they allow you to slide down the wall on your knees instead of having to run out of every bailed attempt. Wrist and ankle injuries are common in skateboarding, so braces are another great investment.
Bearings are standardized to fit in all kinds of skateboard wheels. All bearings will eventually get dirt and gunk in them which slows you down. Regular cleaning is recommended. Higher quality bearings will perform better, roll faster, retain more speed, and last longer when cleaned regularly. Some bearings come with bearing spacers or have spacers built into the bearing. These will fit in any wheel, but are not necessary for most types of skateboarding or longboarding.
Efforts have been taken to improve recognition of the cultural heritage as well as the positive effects of encouraging skateboarding within designated spaces. In 2015, the John F. Kennedy Center for the Performing Arts in Washington, D.C., hosted an event at which skateboarders accompanied by music did tricks on a ramp constructed for a festival of American culture.[68] The event was the climax of a ten-day project that transformed a federal institution formerly off-limits to the skateboarding community into a platform for that community to show its relevance through shared cultural action in a cultural common space.[69]
The Element Quadrant #14 board is 8-inches wide and 31.75-inches long, from nose to tail. This deck features a bare top that needs grip tape and a design on the bottom with four quadrants featuring the Element symbol in alternating red and black backgrounds. The wheelbase between the trucks is just over 14 inches while the nose is 7 inches and the tail is 6.325.
Swing boarding is the activity where a skateboard deck is suspended from a pivot point above the rider which allows the rider to swing about that pivot point. The board swings in an arc which is a similar movement to riding a half pipe. The incorporation of a harness and frame allows the rider to perform turns spins all while flying though the air.
You seem to love Toy Machine deep in your heart! Ed Tempelton’s brand did well this year and landed four places above last year’s ranking. In addition to many other exhilarating designs, the Turtles deck series was the most acclaimed one. The quality is proven by team riders such as Leo Romero, Collin Provost, Daniel Lutheran and Co. You can get your Toy Machine deck from 59.99 € | 50.00 GBP!

Today's skateboarders are founders in this sport—they're pioneers—they are the first. There is no history in Skateboarding—its being made now—by you. The sport is being molded and we believe that doing the right thing now will lead to a bright future for the sport. Already, there are storm clouds on the horizon with opponents of the sport talking about ban and restriction.[16]


Over the years skateboard-deck art has continued to influence and expand the culture of skateboarding, as many people began collecting skateboards based on their artistic value and nostalgia. Productions of limited editions with particular designs and types of collectible prints that can be hung on the wall, have been created by such famous artist as Andy Warhol and Keith Haring. Most professional skateboarders today have their own signature skateboard decks, with their favorite artistic designs printed on them using computer graphics.[100][101]
Despite what many young skaters may think, there is more to choosing a skateboard deck than the graphic on the bottom of the pro skater the deck company sponsors.  The best skateboard deck varies from person to person depending on external factors such as the rider’s weight, skate style, shoe size, and budget.  Person preferences can also impact the decision.  For example, you may want to support your favorite pro skateboarder, so you buy their pro deck.
Finally, consider the type of grip tape you'll want on the board. While function is important in this regard to give your feet ample support, there's nothing wrong with adding some bling to the board's surface either. Many skateboard retailers will offer you several choices of grip tape and board styles, so it's definitely important to ask a lot of questions.
Skateboarding, in one form or another, has been around since the late 1950’s when the first brave pioneer first attached roller skate wheels to a piece of wood. As skateboarding progressed to mimic surfing, skateboards evolved with the style of riding. Skateboards grew and changed shapes as riders experimented with everything from plastic to fiberglass to aluminum constructions - all in an effort to push what was possible. Like most sports or art forms, progression is at the heart of skateboard innovation.
I have a dream to hook up some of the world’s best skateboarders, and make everybody know and love this awesome sport! So, in the summer of 2017, I launched SkatesZone with little more than a dollar and want it to become an interesting place for all skaters where you can find a plenty of skateboards information, tips & tricks, instructions, and more.
Bearings are rated by the ABEC scale (1-9), which has nothing to do with skateboarding. Manufacturers know skaters believe higher ABEC ratings mean faster bearings. They do not, and you won’t find high-quality bearings on off-the-shelf skateboards. Most of these completes are slow. Make a bearing upgrade a top priority. Good bearings can make almost any skateboard fast. This article by longtime pro Anthony Pappalardo gives an insider’s perspective on bearings.

Founded in 2008 in Pennsylvania, Punisher’s goal has been to make graphically pleasing skateboards that have designs that resonate with the rider on a deeper level. Each artist is handpicked by Punisher to design an original, unique image that is then incorporated into the skateboard. The fantastic graphic designs combined with the quality of the skateboard itself make for a very personalized riding experience.


So now that you have an idea of what size and shape board you like, it’s time to choose a brand. A popular size is an 8.5 skateboard deck. If you were looking for a size 8.5 skateboard deck, you could narrow the decks offered on CCS.com to fit in the 8.25 - 8.5 range. This will show you all the boards in that range, and significantly reduce the boards you have to look through. Now, if you don’t have a preference on board brands, find a graphic you like and you’re all set. If this is your first skateboard or are still learning about what wood and brands you prefer, we recommend checking out a CCS Skateboard. They give you a bang for your buck, that's for sure.
A cruiser board is just that, a board that’s ideal for cruising across town. Cruiser boards have kicktails and are usually about the same size as “popsicle” decks, but with more variety in shapes. Cruisers are ideal for getting around because they are lighter and more nimble than larger longboards, allowing you to bob and weave through urban obstacles. Uniquely shaped cruiser decks have also become popular for transition skating because they add style and flavor without having a strong affect on the way the board skates.

Top Skateboards come from companies such as Blind Skateboards. Professional skateboarder Mark Gonzales founded the brand and it was launched in 1989. Today, products are distributed by Dwindle Distribution. The brand is intended for serious, hardcore skateboarders. It has an emphasis and an appreciation for the graphics used for its decks. In the early 1990s, Blind Skateboards set itself apart from other skateboard brands by creating videos. Their first, directed by Spike Jonze, appeared in 1991. You can get completes at Blind that includes the decks, wheels, trucks, and bearings. The Blind Team is professional skateboarders Cody McEntire, TJ Rogers, Kevin Romar, Sewa Kroetkov, Morgan Smith, Sam Beckett, Micky Papa, Yuto Horigome, and Jason Thurtle.

You’re just looking for a quality skateboard to buy for a beginner (either you or someone you know), but you have no idea where to start.  You see bearings, hardware, wheels, decks, and trucks being advertised but don’t want to spend hours researching which individual part to buy.  This is how I felt when I was first looking to but a complete skateboard for my nephew for Christmas many years ago. I wanted something that he would love, but also that was safe and would not break the bank.  After researching and making a decision I thought it would be useful to share this information with others who may be in a similar situation.
Decks come in a variety of shapes and sizes. You can choose a mini-board, a cruiser, a drop-through, or a standard deck for your favorite set of wheels and hardware. Widths range too from a few inches with a 22-inch board to the wide size of a true cruiser. Some decks are flat as possible while others are significantly concave for optimized turning. You can buy a deck with artwork and grip tape already attached for a quick install or you can get a bare-bones wooden deck to truly customize.
×