Best cruiser skateboards include large wheels, since they offer you both stability and speed. They usually have much softer wheels than the regular skateboards you use for doing skateboard tricks and ollies. A good beginner cruise skateboard for beginners can be the La Sports Retro board. It has a simple design and is surrounded by 5-star reviews all around! Many customers report it feeling sturdy and firm, while going at very good speeds.
One of the earliest sponsored skateboarders, Patti McGee, was paid by Hobie and Vita Pak to travel around the country to do skateboarding exhibitions and to demonstrate skateboarding safety tips. McGee made the cover of Life magazine[21] in 1965 and was featured on several popular television programs—The Mike Douglas Show, What's My Line? and The Tonight Show Starring Johnny Carson—which helped make skateboarding even more popular at the time.[22][23][24] Some other well known surfer-style skateboarders of the time were Danny Bearer, Torger Johnson, Bruce Logan, Bill and Mark Richards, Woody Woodward, & Jim Fitzpatrick.
This is the way most serious skateboarders buy new skateboards.  In some cases they choose different brands for the wheels, bearings, trucks, deck, and hardware and customize it to their own unique style and preferences. The benefit to buying part like this you can replace only certain parts that are worn down and you have more control over each aspect of your skateboard.  I recommend this approach to intermediate and advanced skateboarders who want to experiment with different brands and styles.   However, if you are looking to try skateboarding for the first time or buy it as a gift for someone else I would recommend buying an already assembled complete skateboard.

Without good grip tape, skaters have a tough time staying on top of their board. The main complaints about poor grip tape tend to be that it was never very grippy or lost its grip really quickly. Once again, we recommend trusting in name brands with years of experience supporting skateboarders. Unfortunately, if you are buying a pre-made complete skateboard, you probably won't have access to the brand name of the grip. 
See, not all boards are actually bidirectional. Most have a thick tail and a small nose but not this board. So if you’re a switch skater then this board brand is perfect for you. The urethane wheels are designed for the high stress environments and provide the top speed available. The deck tape provides the perfect grip even for those of us with older shoes that are essentially smooth on the bottom.
Skateboard decks width is probably one of the most important factors to consider when buying a deck.  Decks typically range from 7.25-8.5″.  7.5″,7.75″, and 8.0″ tend to be the standard widths if most decks and the general rule is that the bigger your feet are the wider the deck you should get.  Thinner decks are slightly easier to flip, however they are harder to land on due to the decreased surface area.  This is a tradeoff you have to consider, but the typical rule of thumb for younger guys is that you get wider decks the more advanced and larger you get.  Street skaters typically also like smaller decks as they are easier to navigate and carry around in crowded cities and areas.
Positiv decks are usually maple, but some are hard birch. They are made using the same laminating process and glue that Powell Peralta boards use. These decks have Positiv’s super slide treatment (SST), which is essentially a plastic lining that makes the board slide more easily. The stuff works, and wax becomes less necessary for slides with these boards.
There really isn’t a best brand….I prefer boards that are made in America by small companies or for small companies by mid sized companies. but that’s my general preference Watson and PS Stix also makes boards for a lot of companies (mostly outside the USA from what I understand) I have a couple of Welcome Jordon Sanchez decks (pressed by PS Stix) on my spare board shelf that I can wait to skate.
Just like our previous skateboard, also produced by Punisher, the Elphantasm looks just as attractive as its sister model, the Butterfly Jive. Both have very outgoing designs that can fit the style of skating for many riders nowadays. The highly artistic image of this skateboard is, as Punisher states, one of its main attractive features. Combining the high-quality design with the quality craftsmanship of the Candian Maple deck has been one of Punisher’s better choices. It makes this board one of the most durable skateboards out there.
Girl skateboards are know for their witty graphics and high quality canadian maple decks. This specific complete features Mike Carroll’s pro deck and it comes fully assembled directly from the manufacturer (Girl).   The reason this is such a great option for beginners is that all parts of this complete are truly pro quality and it’s built to last.  The width is also perfect for all ages and shoe sizes at a moderate 7.8″.  Definitely a great skateboard for beginners if you like the graphic and logo.

I'm not talking about mall chain stores, like Zumiez; I mean a locally owned and operated skateboard shop. Look around at what they sell, and talk to the staff about the different brands. Of course, they may be biased toward the brands they carry, but chances are you'll learn something that will help you make a decision. There are some big-name board brands that you'll find in most shops, but there should also be some smaller brands you may not have heard or seen around town. There might even be a a local skater or manufacturer that you could support. 
Peralta put together the Powell skate team under the Bones Brigade moniker, employed the services of photographer, artist and visionary C R Stecyk III and was the talent scout responsible for bringing skaters such as Tony Hawk, Rodney Mullen, Lance Mountain, Mike Vallely, Guy Mariano, Tommy Guerreo and inventor of the ollie Alan ‘Ollie’ Gelfand, (amongst many others) to the attention of the global skateboard community.
“As far as the actual look of the vast majority of contemporary graphics goes, I’d say that it feels to me as if something has been lost. It’s down to what you can do with modern heat transfer printing techniques – you can literally just take a photograph from the Internet and print it identically straight onto a skateboard. Speaking personally, there’s very little to challenge you there: either from the point of view of creating graphics, or from the consumer’s perspective. Whereas back when screen-printing was the norm, every time a graphic was produced the artist was physically cutting the key line out by hand. The key line is the final black line that forms the outline of whatever it is that you’re printing and ties in all the other colours together. You can see this in the early Sean Cliver graphics for example, where it’s clear that he has hand cut the key lines as precisely as he was able to, but looked at from today’s perspective they’re not perfectly precise, which is what gives Cliver’s earliest stuff its specific look in my opinion.”
In terms of their skateboard output, Palace have released numerous videos online since their inception, including Gangbanging at Ground Zero (2011), Niggaz with Altitude (2013), a Danny Brady welcome clip ‘Definitely Brady‘ in 2014 and most recently, Very Nice in 2016 featuring newer team riders Shawn Powers and early viral internet star Jamal Smith. Palace are currently working on a full-length video.
Krown’s motto is to provide quality skateboards on a budget. They manage that surprisingly well; not only are their products at budget prices, but they can take quite a lot of beating too. Their skateboards arrive readily assembled and ready to ride. You won’t have to spend hours fiddling with screws and bolts to ride your new prized possession! No matter if you are a beginner or an expert looking for a good board to ride on, Krown’s product is made to fit everyone’s needs.

SkateXS makes skateboards for kids, but the quality of the product is just as high as skateboards for adults. Many parents report their children being incredibly satisfied with the product. The reviews are 90% positive, and it’s easy to see why so many family members and friends turn to buying this skateboard for their young ones. Read on for more to consider when buying a skateboard for beginners.
First, you’ll need to consider the size of the skateboard. Most skateboards are about eight inches wide, but if you have very large feet, or you really want to feel very stable as you learn, consider going with something wider. Remember that the wider you go, the harder it is to learn tricks and to go around curves. If you want to rotate your board mid-air during a jump, you need a board that is no wider than eight inches.
The fact that it has nice and attractive prints also makes it a fashion skateboard. You can use it to show not only your passion in the sport but also your fashion sense. It is also equipped with a high-density emery surface known for being both waterproof and non-slip. With that, you have a hundred percent assurance of your safety when you are riding on it.
Severe injuries are relatively rare.[103] Commonly, a skateboarder who falls suffers from scrapes, cuts, bruises, and sprains.[103] Among injuries reported to a hospital, about half involve broken bones, usually the long bones in the leg or arm.[102] One-third of skateboarders with reported injuries are very new to the sport, having started skating within one week of the injury.[102] Although less common, involving 3.5–9 percent of reported injuries, traumatic head injuries and death are possible severe outcomes.[102]
Most skaters consider width is the most important dimension of the deck. That is measured straight across at the widest point of the deck. Skateboard decks generally range between 7.0 to 10.0 inches depending on the shape of the deck. There are boards that are narrower and wider than that, but they are not common and not practical for all around skating.
Serving skateboarding since 1976, we now offer the finest complete range of skate products in the world, handcrafted to serve skaters from their first skateboard to the top professional level. Our mission is to make the best skate equipment you can buy. If you don’t already know what you want, let us help you select the skateboard components that will enable you to take your skating to the next level. Whether you’re a first-time customer or a loyal fan, we’re proud to serve you.

Peralta put together the Powell skate team under the Bones Brigade moniker, employed the services of photographer, artist and visionary C R Stecyk III and was the talent scout responsible for bringing skaters such as Tony Hawk, Rodney Mullen, Lance Mountain, Mike Vallely, Guy Mariano, Tommy Guerreo and inventor of the ollie Alan ‘Ollie’ Gelfand, (amongst many others) to the attention of the global skateboard community.

Well know for their creative cartoon graphics and high-quality deck construction, this Toy Machine complete is another great starting skateboard for beginners.  This deck is slightly larger than 8″ so it would be perfect for adults or people with larger feet who want a more stable ride.  This setup is another good example of generic parts with a pro quality deck for a very reasonable price.  A great option for a beginner who loves the logo and graphic, but wants to save money on the less important parts until they decide they want to take their skating the to next level.
However, this same company decided to ‘Cash-in’ on THE NAME BRAND, and now con-currently sells JUNK , made in China, at WAL MART. DO NOT BUY any ‘longboard’ they sell that has plastic trucks!! They are an accident awaiting a place to occur. I’ve seen wheels (from a company that prided itself on ‘the best wheels’) that are upwards of 4 mm out-of-round, which could easily cause speed-wobbles, even at pedestrian speeds. From my POV, they’ve opened themselves up to possibly numerous lawsuits, just because of the inferior quality, and poor design choices made in order to maximize profit.
Typically when looking at different completes you will see size dimensions in the format of ~7-8 x 31-34″.  This measurement is referring to the width and length of the skateboard deck.  Typically all other parts are relatively standard and the deck size is the main thing to look for.  Standard skateboard widths for beginners are between 7.5-8.25 with smaller boards being better for younger and smaller guys.  You don’t really have to worry about length much as long as it’s shaped regularly.  You may hear about the concave of the deck or a special type of board construction, but for the most part, it will not matter much to a beginner.  If you have no idea what size would be best you will never go wrong with a 7.5 or 7.75.
The logo is the powerful icon that represents the company's legacy, while graphic styles tend to ebb and flow. Just as skateboarding has evolved and changed over the decades, the skateboard logo has as well, for better and for worse. Picking out the top 50 logos in skateboarding isn't an easy task. Do you separate the logo from the company and base it on visual appeal? I think that's impossible given the nature of skating. Ultimately, these are logos from companies that built the landscape of skateboarding from the ground up. So you have to take into consideration the impact of the brand as well as the logo it represents. If a logo has personal importance to you, then that's all that matters. My list is only one opinion and forged from jumping into skateboarding in 1984.
Obviously, price is an important consideration for most people when looking to buy anything.  For skateboards, the price of the board is generally a good indicator of quality.  In general, most pro branded skateboards that are made up of high-quality parts are in the $70-$100 range.  You can usually find pro branded decks with average parts for $50-$70, and you can find blank options between $25-$50.  I wouldn’t touch anything under $25, as it is likely poor quality and very prone to breakage.

Skateboarding, as we know it, was probably born sometime in the late 1940s, or early 1950s,[citation needed] when surfers in California wanted something to do when the waves were flat. This was called "sidewalk surfing" – a new wave of surfing on the sidewalk as the sport of surfing became highly popular. No one knows who made the first board; it seems that several people came up with similar ideas at around the same time. The first manufactured skateboards were ordered by a Los Angeles, California surf shop, meant to be used by surfers in their downtime. The shop owner, Bill Richard, made a deal with the Chicago Roller Skate Company to produce sets of skate wheels, which they attached to square wooden boards. Accordingly, skateboarding was originally denoted "sidewalk surfing" and early skaters emulated surfing style and maneuvers, and performed barefoot.[6][9][11]


The growth of the sport during this period can also be seen in sales figures for Makaha, which quoted $10 million worth of board sales between 1963 and 1965 (Weyland, 2002:28). By 1966 a variety of sources began to claim that skateboarding was dangerous, resulting in shops being reluctant to sell them, and parents being reluctant to buy them. In 1966 sales had dropped significantly (ibid) and Skateboarder Magazine had stopped publication. The popularity of skateboarding dropped and remained low until the early 1970s.[7][25][26]


“As far as the actual look of the vast majority of contemporary graphics goes, I’d say that it feels to me as if something has been lost. It’s down to what you can do with modern heat transfer printing techniques – you can literally just take a photograph from the Internet and print it identically straight onto a skateboard. Speaking personally, there’s very little to challenge you there: either from the point of view of creating graphics, or from the consumer’s perspective. Whereas back when screen-printing was the norm, every time a graphic was produced the artist was physically cutting the key line out by hand. The key line is the final black line that forms the outline of whatever it is that you’re printing and ties in all the other colours together. You can see this in the early Sean Cliver graphics for example, where it’s clear that he has hand cut the key lines as precisely as he was able to, but looked at from today’s perspective they’re not perfectly precise, which is what gives Cliver’s earliest stuff its specific look in my opinion.”
Lewis Marnell became Almost’s first fully-fledged amateur, an addition announced in a bonus section of Almost’s ground-breaking mini ramp video ‘Almost Cheese and Crackers‘ from (2006) that focused upon Chris Haslam and Daewon Song’s pushing of the boundaries of mini ramp skating and has subsequently been credited with ushering in a new wave of technical transition skating in its wake.
×