In the early 1970s skateparks hadn't been invented yet, so skateboarders would flock and skateboard in such urban places as The Escondido reservoir in San Diego, California. Skateboarding magazine would publish the location and Skateboarders made up nicknames for each location such as the Tea Bowl, the Fruit Bowl, Bellagio, the Rabbit Hole, Bird Bath, the Egg Bowl, Upland Pool and the Sewer Slide. Some of the development concepts in the terrain of skateparks were actually taken from the Escondido reservoir.[27][28][29] Many companies started to manufacture trucks (axles) specially designed for skateboarding, reached in 1976 by Tracker Trucks. As the equipment became more maneuverable, the decks started to get wider, reaching widths of 10 inches (250 mm) and over, thus giving the skateboarder even more control. A banana board is a skinny, flexible skateboard made of polypropylene with ribs on the underside for structural support. These were very popular during the mid-1970s and were available in a myriad of colors, bright yellow probably being the most memorable, hence the name.

The Wasatch Imports Good Skateboards is the ultimate compact and complete street board that is ready-to-go. It is great for exercise and fun. It is very portable and perfect for all skill levels. It has a variety of awesome vintage color combinations that you can choose from. It is made of topline construction, with a high-density plastic deck, 59mm super smooth wheels, ABEC7 bearings, and solid aluminum trucks. It measures 22″ long and 6″ wide and weighs 4 pounds. It has a  full manufacturer’s lifetime warranty on all parts, pieces, and materials. It has a weight limit of 200 pounds which can ensure that bigger skaters can join the fun.
Element Skateboards are also one of the most popular and best skateboards in the world of boarding. If you choose to purchase it, you will get high-quality skateboards that will stand the test of time. The best thing about them is environmental friendliness that they promote along the way. Therefore, you will enjoy in Driftwood deck, which are much more affordable and lighter.

The growth of the sport during this period can also be seen in sales figures for Makaha, which quoted $10 million worth of board sales between 1963 and 1965 (Weyland, 2002:28). By 1966 a variety of sources began to claim that skateboarding was dangerous, resulting in shops being reluctant to sell them, and parents being reluctant to buy them. In 1966 sales had dropped significantly (ibid) and Skateboarder Magazine had stopped publication. The popularity of skateboarding dropped and remained low until the early 1970s.[7][25][26]
If Supreme wasn’t featured on this list, we might get a long list of hate in the comments, but I’m not adding it just to satisfy the hypebeasts. Over the past few years, what was previously dismissed as a brand that catered mostly to resellers has once again gained a spot at the forefront of what is important in skateboarding today. With the release of cherry in 2014, Supreme showed the world that they haven’t forgotten their roots, and reminded us they will always be a skateboard company first and foremost.
Obviously, price is an important consideration for most people when looking to buy anything.  For skateboards, the price of the board is generally a good indicator of quality.  In general, most pro branded skateboards that are made up of high-quality parts are in the $70-$100 range.  You can usually find pro branded decks with average parts for $50-$70, and you can find blank options between $25-$50.  I wouldn’t touch anything under $25, as it is likely poor quality and very prone to breakage.
SkateXS has custom skateboards for kids of every young age. From ages 5-7 we have skateboards sizes 7” x 28”. For kids between the ages of 8-10 we have skateboards sized between 7.25” x 29”. These are the perfect sizes for young kids, since it helps them feel less overwhelmed by the board. It also helps provide them with a board that is ideal to their side, encouraging safe cruising and skateboard tricks.
Quartersnacks has been on one these past few years, making soft goods that will instantly make you look like you don’t actually suck at skating (me), and getting the honor of customizing their own Nike SB Dunk Low. Name another company in skateboarding that has that, and a book about their first decade of history coming soon through the world-renowned Random House publishing company? We’ll wait.
There are three types of skateboards: classic, retro, and snake. Classic boards are the most common and what you generally find when you go shopping. Retro boards are longer and have larger wheels. They are great for skating long distances but inferior to classic boards for doing tricks. A snake board is not appropriate for kids since it requires intensive balance and has only one wheel.
They aim to make of the best distinction to recognize among a thousand brands available. Starting from scratch, the brand has become successful with the invention of drop down longboard that convinces skaters around the world to have many advantages. Their belief in “making quality skateboards that will improve life” has never faded as they grow to be in the back of Blackcomb Ski Club. They even plant a tree for every product they make and sell to prove their eco-friendly operation.
If you are looking for a skateboard that will provide you with all the necessary features you need to ride safely and efficiently, then the Punisher Butterfly Jive will be the perfect board for you. No matter if you want to give this skateboard to one of your kids or if you want it for yourself, it has the perfect size to fit just about anyone. This makes it very versatile, and is able to be used by nearly every age range.
SkateXS is a very popular brand among parents that have kids that are enthusiastic about skating. They have a variety of skateboards, plenty of color choices and even add a name tag of your child on the grip tape. This helps the child feel like they have full control over the board and its development. This, in turn, will make them treasure it more.

A good helmet protects your most important vital organ. Remember that in some states helmets are required by law. In Oregon, for example, skaters 15 and under can be fined for not wearing a helmet. Knee and elbow pads will also save you from bumps and bruises. Knee pads are particularly valuable when learning to skate tall vertical walls because they allow you to slide down the wall on your knees instead of having to run out of every bailed attempt. Wrist and ankle injuries are common in skateboarding, so braces are another great investment.
Moreover, we love how this cruiser skateboard is a beautiful concave shape with stunning graphics. We love its 7 ply deck with its 65mm Road Rider 78a wheels that are perfect for a quick ride out of your door. Its cruiser shape is excellent for pulling off tricks and also downhill riding.  It has one of the best trucks around bullet B137 blue and white trucks and also comes with grip tape, Sand spray grip; measures 27.7 x 8.8 inches.
It comes with a plastic board deck, which is small in size, making it ideal for riders who need a really sturdy skateboard. It is more suitable for both experts and beginners who want to learn new tricks in skateboarding. The fact that it is stable and small makes it good for kids, too. It promotes ease in riding and controlling it in a crowded street. This complete skateboard is lightweight, too, allowing you to carry it almost everywhere.
A “razor tail” is the term for when the tail of the skateboard deck becomes sharpened and worn due regular use and scraping the tail of your skateboard on the ground to stop.  When your deck gets razor tail, its becomes a weapon against you and anyone need you while you’re skating as being hit with a sharpened tail is very painful.  To avoid this from happening, you could buy a carbon fiber deck that may be more resistant to wear, but more importantly you should not scrape your tail to stop.  Instead you can lightly place one foot or toe down to slow your speed or powerslide to a stop.
7.12"7.25"7.3"7.5"7.56"7.62"7.7"7.75"7.8"7.81"7.87"7.875"7.88"7.9"8"8.02"8.06"8.1"8.12"8.125"8.13"8.18"8.19"8.2"8.25"8.27"8.28"8.28"8.3"8.31"8.32"8.35"8.37"8.375"8.38"8.4"8.44"8.45"8.47"8.5"8.55"8.6"8.62"8.63"8.67"8.68"8.7"8.75"8.8"8.87"8.88"8.9"8.948.989"9.05"9.1"9.12"9.13"9.16"9.18"9.2"9.25"9.265"9.3"9.31"9.32"9.37"9.375"9.38"9.4"9.42"9.5"9.56"9.57"9.6"9.62"9.625"9.739.75"9.78"9.8"9.81"9.849.85"9.87"9.875"9.89"9.9"9.97"9.9810"10.1"10.2"10.25"10.34"10.37"10.5"11.2"11.75"
Top Ten Worst Companies In the U.S.Best Skateboarding BrandsBest BMX Bike BrandsmcarzwashereBest Scooter BrandsBest Brands of Mountain BikesBest Lego ThemesTop 10 Best Assault RiflesRotorheadTop 10 Best Nerf GunsTop 10 Things to Buy with $100Best Knife CompaniesTop Ten Best Cigarette BrandspreachinpreachTop 10 Most Needed Survival SuppliesTop Ten Electronics BrandsMatrixGuyTop 10 Best Airlinescarvandog

The magazine only lasted four issues, but resumed publication as Skateboarder in 1975.[16][17][18] The first broadcast of an actual skateboarding competition was the 1965 National Skateboarding Championships, which were held in Anaheim, California and aired on ABC’s “Wide World of Sports.[19][20] Because skateboarding was a new sport during this time, there were only two original disciplines during competitions: flatland freestyle and slalom downhill racing.[6]
Bearings are rated by the ABEC scale (1-9), which has nothing to do with skateboarding. Manufacturers know skaters believe higher ABEC ratings mean faster bearings. They do not, and you won’t find high-quality bearings on off-the-shelf skateboards. Most of these completes are slow. Make a bearing upgrade a top priority. Good bearings can make almost any skateboard fast. This article by longtime pro Anthony Pappalardo gives an insider’s perspective on bearings.
Here's some general guidelines to get you started: Narrower decks are lighter and easier to flip, but you’ll sacrifice some stability. Wider boards are more stable but are heavier and slightly less ideal for some tricks. Skaters who like flip tricks, manuals, ledges, and flat bars usually prefer boards on the narrower side of the spectrum (7.75 – 8.25 inches). Those who skate big bowls, hand rails, or like to jump down large gaps at high speeds are usually more comfortable with a larger board (8.25 – 9.0 inches).
That’s a lot of wood! But it is by no means the end. In 2016 there were many other brands that have pleased us with wooden works of art. Chocolate were inspired by modern living shown in their Modern Homes series, Welcome beautifully presented decks in original shapes, and the two German brands Inpeddo and Mob showed that seven layers do not necessarily have to come from overseas.
These films have helped improve the reputation of skateboarding youth, depicting individuals of this subculture as having a positive outlook on life, prone to poking harmless fun at each other, and engaging in healthy sportsman's competition. According to the film, lack of respect, egotism and hostility towards fellow skateboarders is generally frowned upon, albeit each of the characters (and as such, proxies of the "stereotypical" skateboarder) have a firm disrespect for authority and for rules in general. Gleaming the Cube, a 1989 movie starring Christian Slater as a skateboarding teen investigating the death of his adopted Vietnamese brother, was somewhat of an iconic landmark to the skateboarding genre of the era.[citation needed] Many well-known skaters had cameos in the film, including Tony Hawk and Rodney Mullen, where Mullen served as Slater's stunt double.
Figuring out how to buy a skateboard can be daunting, especially if you’re not sure what you are looking for. There are customizable parts, accessories and some fancy technology that can be overwhelming. Good news is, we can simplify it for you! At Tactics, our crew is full of daily skaters, so we put our heads together to break it all down and give you the basics, plus a few recommendations.
Where do you live? I forget that this is a global community. If you're US/CA I would recommend going to a local shop and testing some out and see what you like the most cause a Girl will be different from an Almost from an Expedition in very little ways that might turn you off the board shape more than their graphics/team. I would get between a 8" and 8.25" deck though.
The skateboard has a solid and stiff mini-deck, which is around 22 inches and constructed out of 100% plastic material. Such deck is very lightweight. It is only four pounds but you have an assurance that it can handle up to 198 lbs. of weight. You will also fall in love with the board as it comes in 23 graphics and colors, so picking a favorite is much easier.
Figuring out how to buy a skateboard can be daunting, especially if you’re not sure what you are looking for. There are customizable parts, accessories and some fancy technology that can be overwhelming. Good news is, we can simplify it for you! At Tactics, our crew is full of daily skaters, so we put our heads together to break it all down and give you the basics, plus a few recommendations.
Where do you live? I forget that this is a global community. If you're US/CA I would recommend going to a local shop and testing some out and see what you like the most cause a Girl will be different from an Almost from an Expedition in very little ways that might turn you off the board shape more than their graphics/team. I would get between a 8" and 8.25" deck though.

With distinctive graphics, often touching upon controversial issues such as racism with American society such as the infamous Jim Thiebaud ‘Lynch the KKK’ graphic designed by Natas Kaupas and Kevin Ancell, and classic Jeff Klindt graphics such as the James Kelch ‘James’ board, which was recently re-released, Real’s aesthetic has always been instantly recognisable.
This brand gets its name from a slang term for strip club. One video was called “Chicken Bone Nowison,” and it opens with a scene of skater pummeling a security guard. Is that not awesome enough? If there is a company that embodies a more perfect IDGAF attitude in skateboarding, please let me know. For the homies, by the homies is their mantra, which is pretty cool with a team comprised of rippers like Theotis Beasley, Andrew Reynolds, Dustin Dollin, Jim Greco, Terry Kennedy, Lizard King… The list goes on.
POSITIV has begun to gain some serious momentum in the past years.  They released an entire line of team completes in sizes ranging from 7.5-8.0″ at very affordable prices. This specific deck is 7.75″ so it is a comfortable size for all ages and weights.  The great thing about this board is that it includes MiniLogo bearings and other pro brand parts.  The deck also uses a rare waterproof sealant and slide coat to ensure that the deck lasts longer and slides smoother than other skateboards on the market.  The overwhelmingly “positive” (no pun intended) reviews speak for themselves with this skateboard.
Progressive designs deliver a more dramatic upward curve and a wider base, providing increasingly secure footing and a locked-in feel. The W-concave shape is more narrow with an additional center curve, allowing for a greater shift in energy between the heel and toe. This design also boasts more responsive control and quick turning capabilities. Tub concave decks resemble the radial shape, however their rails extend at a sharp angle instead of a gradual curve. Asymmetrical decks feature rails that extend at different angles, affording more power to a rider's heels when making turns. Less commonly used are decks with convex and completely flat shapes. Convex boards offer an upwards-arching shape, which some downhill skateboarders prefer for a more natural feel, whereas flat designs increase available foot space and are more popular for experienced riders looking to perform fancy tricks.
The most recent Girl Films production, Pretty Sweet, signified a passing of the torch for one of the most talented skate teams in the biz. Some may have been disappointed to see Rick Howard and other OGs ride the bench, but new jacks like Alex Olson and Mike Mo Capaldi, and the Trunk Boyz Elijah Berle, Raven Tershy, Stevie Perez, Vincent Alvarez, and Cory Kennedy, leave little doubt that we're in for another 20 years of epic skating and killer goods.
Toy Machine is an Ed Templeton company and one of the best skateboard companies of its time. Ed is an Orange County original skater and developed the board he wanted to skate on, thus creating the Toy Machine Brand. Though the Toy Machine team has seen many changes, it has always held onto professional skaters that can provide insight in the latest needs of boards. Toy Machine skateboards are known for their signature monster graphics, which have made them a top skateboard brand.
It is mainly because those items are guaranteed to help you familiarize yourself with the ins and outs of using them. They are a big help in making you feel comfortable when you push off with your feet while also balancing on top of the board when riding. It is not good to go for a very technical product, so it’s best to choose the mentioned types first.
FTC has grown from being the staple skate shop of the Bay Area to being a respected brand pushing skateboarding across the globe. Their SF flagship sits in the famous Haight Ashburry district, always attracting visitors and giving them a look into what skateboarding is really like in this day and age. FTC will have you covered in their own gear, and will also always be pushing the next big thing in their shops, and they never make a bad call.
After numerous tour-based releases and the epic Lakai footwear video ‘Fully Flared‘ (2007), Girl Skateboard’s last (to date) full-length company release came in the form of ‘Pretty Sweet‘ (2012) which, aside from showcasing ground-breaking skateboarding, also set a new standard in terms of production values with Ty Evans employing cinematic camera technologies to capture the skateboarding, as well as the skits.
×