Our only issue with Penny skateboards is that they are sold without grip tape. Though not necessary, it can make the ride a lot safer with grip tape. All in all, Penny is one of the top skateboard brands out there. Let us now look at a succinct brand scorecard of Penny Skateboards and see how it scores in various factors that we have considered while ranking the best skateboard brands.
The 18 has made some moves over the past few years that have shown they’re not a bunch of old hesh dudes that piled out and are just holding onto their stronghold with guys who are all about tattoos and brews. They collabed with Supreme and had one of their legends, Andy Roy, model the lookbook, and also put out Destination Unknown, a full video about their vagabond travels in the hunt for anything to skate. Most recently, they released What’s Up Monkey?, an all iPhone full-length video shot all across the world.
Their fan base loves them for pushing goofy but fun looking skating that in reality is heavier and rawer than most will realize, and their board graphics and t-shirts feature art from their riders in striking colorways. Their product immediately stands out among the bunch at any shop it’s stocked. These guys are doing things exactly their way, and it’s sticking.

Manufacturers started to experiment with more exotic composites and metals, like fiberglass and aluminium, but the common skateboards were made of maple plywood. The skateboarders took advantage of the improved handling of their skateboards and started inventing new tricks. Skateboarders, most notably Ty Page, Bruce Logan, Bobby Piercy, Kevin Reed, and the Z-Boys started to skate the vertical walls of swimming pools that were left empty in the 1976 California drought. This started the "vert" trend in skateboarding. With increased control, vert skaters could skate faster and perform more dangerous tricks, such as slash grinds and frontside/backside airs. This caused liability concerns and increased insurance costs to skatepark owners, and the development (first by Norcon, then more successfully by Rector) of improved knee pads that had a hard sliding cap and strong strapping proved to be too-little-too-late. During this era, the "freestyle" movement in skateboarding began to splinter off and develop into a much more specialized discipline, characterized by the development of a wide assortment of flat-ground tricks.
Remember don't get those cheap skateboards from Walmart. They won't hold up to any skating and can break from a single ollie that is landed improperly. I know they are cheap, but 2 cheap boards a week for a few weeks adds up to the price of 2 or 3 expensive boards. These boards are also heavier and slow which makes them much more difficult to do tricks on.
As the only female-focused and female-owned skateboard brand on this list, Meow Skateboards is notable for boldly stepping into the male-dominated skateboard industry and succeeding where other similar projects have failed. Prior to establishing the Meow Skateboard Brand, Lisa Whitaker was already a driving force within female skateboarding as the founder of the largest online resource for female skateboarding in the world – Girls Skate Network.
The Wasatch Imports Good Skateboards is the ultimate compact and complete street board that is ready-to-go. It is great for exercise and fun. It is very portable and perfect for all skill levels. It has a variety of awesome vintage color combinations that you can choose from. It is made of topline construction, with a high-density plastic deck, 59mm super smooth wheels, ABEC7 bearings, and solid aluminum trucks. It measures 22″ long and 6″ wide and weighs 4 pounds. It has a  full manufacturer’s lifetime warranty on all parts, pieces, and materials. It has a weight limit of 200 pounds which can ensure that bigger skaters can join the fun.
A magazine?! This is an outrage! Yeah, it is. But Low Card has become the defacto hat brand for all the cool hesh skaters in America, so deal with it. Also, the mag's graphic tees, baseball shirts, coaches jackets, and beanies are all highly dope. The custom mesh hat program is the way to go if you feel the need to wear your “yeah, I skate” calling card on your head.
Hey, are you looking for a great fun with a fantastic ride? If YES, then longboarding will be the best option for you to realize all of your dreams. Longboarding is an effective form of physical exercise. You can also save money if you will use it when going to a nearby place. Also, if longboarding is your passion and if you are looking for the best longboard, you are in the right place to get additional information about longboards.

The deck is expertly constructed with a vertically laminated bamboo core and bamboo veneer exterior, all attached with triaxial glass and epoxy as well as a course grip tape top. The grip tape is arranged in an unusual and stylish, yet functional, design. The 34-inch board features a 13-degree nose angle and an 18-degree tail angle. With its directional shape, you’ll easily be able to cruise on this board or pull a few tricks.

Freedom Plaza has become a popular location for skateboarding, although the activity is illegal and has resulted in police actions.[5][115] A 2016 National Park Service management plan for the Historic Site states that skateboarding has damaged stonework, sculptures, walls, benches, steps, and other surfaces in some areas of the Plaza.[5] The management plan further states that skateboarding presents a persistent law enforcement and management challenge, as popular websites advertise the Plaza's attractiveness for the activity.[5] The plan notes that vandals have removed "No Skateboarding" signs and recommends the replacement of those signs.[5]
Real’s video output continued with Kicked out of Everywhere (1999), Real to Reel (2001) and Seeing Double (2002). Following these full-length releases Real adopted a different approach to video making with a number of shorter tour-based and remix video releases which chimed with the shorter attention spans of the Internet generation – these include titles such as Real ‘Remix Project V1.1 (2007) and Real ‘From the Vaults V.1 (2007).
A Maplewood board embellished with polyurethane coating can hardly describe the liveliness of the game combined with the names of professional skateboarding brands. Considering, skating as mere sports equipment can divulge you into a wrong dimension. We believe whether you choose among the professional and impulsive skateboard shoe brands or best skateboard decks brands, commitment towards the sport can make you rule the ambience.
In the early 1970s skateparks hadn't been invented yet, so skateboarders would flock and skateboard in such urban places as The Escondido reservoir in San Diego, California. Skateboarding magazine would publish the location and Skateboarders made up nicknames for each location such as the Tea Bowl, the Fruit Bowl, Bellagio, the Rabbit Hole, Bird Bath, the Egg Bowl, Upland Pool and the Sewer Slide. Some of the development concepts in the terrain of skateparks were actually taken from the Escondido reservoir.[27][28][29] Many companies started to manufacture trucks (axles) specially designed for skateboarding, reached in 1976 by Tracker Trucks. As the equipment became more maneuverable, the decks started to get wider, reaching widths of 10 inches (250 mm) and over, thus giving the skateboarder even more control. A banana board is a skinny, flexible skateboard made of polypropylene with ribs on the underside for structural support. These were very popular during the mid-1970s and were available in a myriad of colors, bright yellow probably being the most memorable, hence the name.

This entry is all about giving you an insight through the eyes of skatedeluxe. Which brands dominated your year in 2015? Our compilation of the ‘brands of the year’ is based on a combined check of deck sales, brand shop visits, your search requests and common interest on blog entries to skateboarding’s MVPs. Our in-house brand SK8DLX has been left out of the ranking. Still, we want to thank you that you keep skating our boards and that you seem to like what we put out. Enough talking, let’s start with the Top 15 skateboard deck brands of the year 2015

Top Ten Worst Companies In the U.S.Best Skateboarding BrandsBest BMX Bike BrandsmcarzwashereBest Scooter BrandsBest Brands of Mountain BikesBest Lego ThemesTop 10 Best Assault RiflesRotorheadTop 10 Best Nerf GunsTop 10 Things to Buy with $100Best Knife CompaniesTop Ten Best Cigarette BrandspreachinpreachTop 10 Most Needed Survival SuppliesTop Ten Electronics BrandsMatrixGuyTop 10 Best Airlinescarvandog


A “razor tail” is the term for when the tail of the skateboard deck becomes sharpened and worn due regular use and scraping the tail of your skateboard on the ground to stop.  When your deck gets razor tail, its becomes a weapon against you and anyone need you while you’re skating as being hit with a sharpened tail is very painful.  To avoid this from happening, you could buy a carbon fiber deck that may be more resistant to wear, but more importantly you should not scrape your tail to stop.  Instead you can lightly place one foot or toe down to slow your speed or powerslide to a stop.
Many jurisdictions require skateboarders to wear bicycle helmets to reduce the risk of head injuries and death. Other protective gear, such as wrist guards, also reduce injury. Some medical researchers have proposed restricting skateboarding to designated, specially designed areas, to reduce the number and severity of injuries, and to eliminate injuries caused by motor vehicles or to other pedestrians.[102]

A “razor tail” is the term for when the tail of the skateboard deck becomes sharpened and worn due regular use and scraping the tail of your skateboard on the ground to stop.  When your deck gets razor tail, its becomes a weapon against you and anyone need you while you’re skating as being hit with a sharpened tail is very painful.  To avoid this from happening, you could buy a carbon fiber deck that may be more resistant to wear, but more importantly you should not scrape your tail to stop.  Instead you can lightly place one foot or toe down to slow your speed or powerslide to a stop.
In the ever-volatile skateboarding industry, brands come and go, then come back again, only to go out once more, and eventually make room for the next person who is really in tune with what skateboarding is today. While no two brands can really be compared, the true signifier of their importance in skateboarding is how they can make a difference in the culture and bring something new to the table that hasn’t been done before. Every single brand on this list has been a part of something unique that has made us pay attention to them above all the others out there doing it in this saturated market.
While the skateboard has a lot of moving parts, one's safety, comfort, and ease to learn new skills and perform tricks are all of equal importance. For this reason, choosing the right type of deck and wheels should be two of the first considerations, as the board's shape, material construction, and wheel makeup will all have a significant impact on your ability to control the equipment and maintain good aerodynamics. Additionally, the width of the deck is important, so one must take their height, shoe size, and style of riding into account in order to ensure the deck offers as much support as possible, regardless of application.

As the name implies, a complete skateboard contains all the parts listed above, but in an already assembled ready-to-ride skateboard.  The advantage to buying a complete is it completely eliminates the research and guesswork of buying each product individually and ensures that the skateboard is assembled correctly and safely.  This is the approach I used when buying a skateboard for my nephew and what I recommend for people buying a skateboard as a gift or as their very first skateboard for themselves.

Skateboarding during the 1990s became dominated by street skateboarding. Most boards are about 7 1⁄4 to 8 inches (180 to 200 mm) wide and 30 to 32 inches (760 to 810 mm) long. The wheels are made of an extremely hard polyurethane, with hardness (durometer) approximately 99A. The wheel sizes are relatively small so that the boards are lighter, and the wheels' inertia is overcome quicker, thus making tricks more manageable. Board styles have changed dramatically since the 1970s but have remained mostly alike since the mid-1990s. The contemporary shape of the skateboard is derived from the freestyle boards of the 1980s with a largely symmetrical shape and relatively narrow width. This form had become standard by the mid '90s.[42]

The board itself is actually very portable in the sense that it only weighs a modest four pounds. Which means you can jump on and off in any situation that may warrant you to walk or ride. The ABEC7 bearings are top quality bearings and of the highest class. Also accompanying all of these fine features comes the kick-tail end of the board. This is to ensure that maneuvering and tricks can be performed with this utmost of ease.
The deck is expertly constructed with a vertically laminated bamboo core and bamboo veneer exterior, all attached with triaxial glass and epoxy as well as a course grip tape top. The grip tape is arranged in an unusual and stylish, yet functional, design. The 34-inch board features a 13-degree nose angle and an 18-degree tail angle. With its directional shape, you’ll easily be able to cruise on this board or pull a few tricks.

If you are completely new to skateboarding, consider taking a minute to read through the Skateboard Decks Section in our Buyer’s Guide will be helpful, but a good rule of thumb is: the bigger your feet, the wider your board should be. If you wear a size 9 and up, you can’t go wrong with buying an 8” board. Narrow boards are easier to flip while wider boards are more stable, but there are no hard and fast rules to skateboarding. The only way to really find out what you like is by trying new shapes, sizes, and brands. Brands like Welcome, Baker, Chocolate, Deathwish, and Element all have a wide variety of sizes, shapes, and graphics.
×