These films have helped improve the reputation of skateboarding youth, depicting individuals of this subculture as having a positive outlook on life, prone to poking harmless fun at each other, and engaging in healthy sportsman's competition. According to the film, lack of respect, egotism and hostility towards fellow skateboarders is generally frowned upon, albeit each of the characters (and as such, proxies of the "stereotypical" skateboarder) have a firm disrespect for authority and for rules in general. Gleaming the Cube, a 1989 movie starring Christian Slater as a skateboarding teen investigating the death of his adopted Vietnamese brother, was somewhat of an iconic landmark to the skateboarding genre of the era. Many well-known skaters had cameos in the film, including Tony Hawk and Rodney Mullen, where Mullen served as Slater's stunt double.
However, the diversity of Santa Cruz skateboard’s stake in the skateboard business meant that they easily survived the mid-90’s slump in popularity and returned with an newly invigorated team and powered on with video after video from the mid-90’s to the present day. Similarly to Powell-Peralta, Santa Cruz are also notable for their Veteran Division (documented in their 2007 release ‘V Day‘) celebrating pro riders such as Keith Meek, Tom Knox and Eric Dressen from earlier eras of Santa Cruz’s existence. Santa Cruz Skateboards current line of product boasts many re-released classic boards from earlier eras of the brand and are as popular, if not more so, than they were originally, thanks to an explosion in the nostalgia and collector’s markets within skateboarding.
Swing boarding is the activity where a skateboard deck is suspended from a pivot point above the rider which allows the rider to swing about that pivot point. The board swings in an arc which is a similar movement to riding a half pipe. The incorporation of a harness and frame allows the rider to perform turns spins all while flying though the air.
Skateboard decks width is probably one of the most important factors to consider when buying a deck. Decks typically range from 7.25-8.5″. 7.5″,7.75″, and 8.0″ tend to be the standard widths if most decks and the general rule is that the bigger your feet are the wider the deck you should get. Thinner decks are slightly easier to flip, however they are harder to land on due to the decreased surface area. This is a tradeoff you have to consider, but the typical rule of thumb for younger guys is that you get wider decks the more advanced and larger you get. Street skaters typically also like smaller decks as they are easier to navigate and carry around in crowded cities and areas.
Isle is much newer to the game than a lot of the other brands mentioned on the list, but that doesn’t mean they don’t deserve the same respect. Drawn straight from the mind of skateboarder Nick Jensen, a London native with the eye of a true artist, Isle’s graphics could just as easily be hanging in a museum rather than in skate shops. Jensen’s creative process involves him sculpting, painting and photographing every board graphic himself in his own studio, manipulating each art piece to work as a graphic. Isle offers one of the most well developed brand images in skateboarding, due in big part to the fact that it is literally an outlet of one man’s own rampant creativity.
Grind King skateboard trucks are the best trucks available for grinding. The truck hangar is made from aluminum, making it softer and weaker, but better for grinding. This means you will have to replace them faster if you grind, but your grinds will be smoother and better. Grind King trucks do use special hex-head kingpins, so you will need a special tool to adjust them.
The magical thing about Supreme is that—despite what some may think—it actually caters to everyone. While they may not go out of their way to make you feel welcome, at its core, the brand is a legendary downtown skate institution, and there is no singular sensibility you can pin on Supreme. It's hip-hop and punk, menswear and streetwear. The unifying aspect is deep roots in skate, music, and art. Beyond that, anything goes.
There is one question that one or another might have had in mind before: What is the best skateboard deck brand? Unfortunately, we don’t have a satisfying answer. But we did our very best and moved mountains by coming up with a very complex formula that takes sold decks, brand shop visits, search queries and lots of other fripperies into consideration to display a list of your favourite skateboard brands of 2017.
Sending sincere thanks to everyone that supported us over the last decade – including team riders, fans, customers, photographers, filmers, & mags. Thanks to George & Juli Powell & everyone at Skate One Corp. who believed in us & helped facilitate our vision. Thanks most of all to Cara-Beth Burnside for whom without her influence, leadership, & no-bullshit-spirit none of this would have ever been possible.
Bearings are rated by the ABEC scale (1-9), which has nothing to do with skateboarding. Manufacturers know skaters believe higher ABEC ratings mean faster bearings. They do not, and you won’t find high-quality bearings on off-the-shelf skateboards. Most of these completes are slow. Make a bearing upgrade a top priority. Good bearings can make almost any skateboard fast. This article by longtime pro Anthony Pappalardo gives an insider’s perspective on bearings.
The use of skateboards solely as a form of transportation is often associated with the longboard. Depending on local laws, using skateboards as a form of transportation outside residential areas may or may not be legal. Backers cite portability, exercise, and environmental friendliness as some of the benefits of skateboarding as an alternative to automobiles.
Pro decks are what most people are familiar with and what is seen most commonly around skateparks and driveways around the US. These decks can have a variety of different logos and images on them and sometimes are a specific professional skater’s pro deck. Pro decks provide skaters a way to support their favorite riders and have the same equipment they see all their favorite pros using. The quality of professional decks and parts are almost always very high as they have a reputable and brand image to uphold. For this higher level of quality and you can expect to pay 2-3x the cost of a blank complete. If you want to save some money and still have a pro look, there are options available that have generic blank parts with a pro deck. This may be a good option for a beginner skater who is not yet doing complex tricks that may break these cheaper parts, but they still want the look and feel of a pro skateboard. As the skater progresses they can then switch out these generic parts for higher-end options as necessary.
Founded in 2008 in Pennsylvania, Punisher’s goal has been to make graphically pleasing skateboards that have designs that resonate with the rider on a deeper level. Each artist is handpicked by Punisher to design an original, unique image that is then incorporated into the skateboard. The fantastic graphic designs combined with the quality of the skateboard itself make for a very personalized riding experience.
Positiv decks are usually maple, but some are hard birch. They are made using the same laminating process and glue that Powell Peralta boards use. These decks have Positiv’s super slide treatment (SST), which is essentially a plastic lining that makes the board slide more easily. The stuff works, and wax becomes less necessary for slides with these boards.
When you’re searching for one of the best decks on the market, it’s important to not go overboard. You don’t need one that is made from the rarest wood or that has the most unique design. The best boards may be the ones that balance cost, design, and quality. After all, with healthy use, you’ll eventually have to replace your deck anyway. You want the one that will give you the most functionality and enjoyment while you use it.
This skateboard is within the 22 inch category, (there are other categories according to size ranging from 22 inch to 36 inch longboards) and the Jet Black Lilac is our personal favorite. We love the twist of the color which is for people who want to keep it simple with just a dash of color. It also has some other amazing specifications like classic waffle top non-slip deck, 3-inch aluminum trucks with powder-coated finish and 59mm, 83A wheels for a smooth ride.
Before Zoo York, Supreme, and 5Boro, New York had SHUT. For a short while, SHUT ruled, but soon the business fell out and founder Rodney Smith left to start Zoo York with Eli Morgan Gesner (who drew the original SHUT logo), and Adam Schatz. SHUT went dormant while the three men grew Zoo York into a successful business, and when they sold it off to Ecko in 2006, SHUT was reborn. The brand's flagship store resides on New York City's Lower East Side, so you can go witness skateboard history in person any time you want.
Freestyle skating remained healthy throughout this period, with pioneers such as Rodney Mullen inventing many of the basic tricks that would become the foundation of modern street skating, such as the "Impossible" and the "kickflip". The influence that freestyle exerted upon street skating became apparent during the mid-1980s; however, street skating was still performed on wide vert boards with short noses, slide rails, and large soft wheels. In response to the tensions created by this confluence of skateboarding "genres", a rapid evolution occurred in the late 1980s to accommodate the street skater. Since few skateparks were available to skaters at this time, street skating pushed skaters to seek out shopping centers and public and private property as their "spot" to skate. (Public opposition, in which businesses, governments, and property owners have banned skateboarding on properties under their jurisdiction or ownership, would progressively intensify over the following decades.) By 1992, only a small fraction of skateboarders continuing to take part in a highly technical version of street skating, combined with the decline of vert skating, produced a sport that lacked the mainstream appeal to attract new skaters.
Many of the most popular skateboard brands sponsor teams of skaters, like Zero's Jamie Thomas and Element's Barn Margera. Professional skaters are often good sources of information as to what skateboard you should buy. If a pro skater rides a certain board, there is a good chance that if he or she finds that it is high enough quality you will also like the board. Users looking for a new skateboard will want to research a variety of different brands to find the one that best suits their needs, based on function and features.
It’s long deck and premium bearings will give you the ease of pushing which will help you to tear out of around- town traveling. It has a unique shape of the perimeter which offers you 9.6 inches of leverage per turn. Can you imagine it? It also helps you to eliminate the wheel bite. This board has a maple covered deck that will certainly catch the attention of others. It is almost impossible that you cease to enjoy the splendor and elegance of this board. Furthermore, along with your stylish longboard, 245 mm axles are incorporated.
If you are eager to have a new skateboard and need to take into consideration your budget, then Landwalker’s skateboard is the prefect board for you, based on personal preference. It’s by far one of the cheapest products on this list, while still giving you sufficient endurance and quality performance. Thanks to the high-density wood, you can rest assured that even if you fall, your skateboard will remain to be in one piece. Preassembled completes are ready to take out onto the road.
Mixing a clean and colourful graphical identity with tongue-in-cheek parodies of existing brand logos (most notably the now largely discontinued Starbucks homage), Skateboard Cafe have carved a niche within the flooded UK skateboard market largely based on their skater-owned status, the lack of conceit in their identity and a regular and well-received output of video content.
Today's skateboarders are founders in this sport—they're pioneers—they are the first. There is no history in Skateboarding—its being made now—by you. The sport is being molded and we believe that doing the right thing now will lead to a bright future for the sport. Already, there are storm clouds on the horizon with opponents of the sport talking about ban and restriction.
Manufacturers started to experiment with more exotic composites and metals, like fiberglass and aluminium, but the common skateboards were made of maple plywood. The skateboarders took advantage of the improved handling of their skateboards and started inventing new tricks. Skateboarders, most notably Ty Page, Bruce Logan, Bobby Piercy, Kevin Reed, and the Z-Boys started to skate the vertical walls of swimming pools that were left empty in the 1976 California drought. This started the "vert" trend in skateboarding. With increased control, vert skaters could skate faster and perform more dangerous tricks, such as slash grinds and frontside/backside airs. This caused liability concerns and increased insurance costs to skatepark owners, and the development (first by Norcon, then more successfully by Rector) of improved knee pads that had a hard sliding cap and strong strapping proved to be too-little-too-late. During this era, the "freestyle" movement in skateboarding began to splinter off and develop into a much more specialized discipline, characterized by the development of a wide assortment of flat-ground tricks.
The first thing to consider is what kind of skateboarding you want to do. Do you want to skate your local skate park and learn tricks? Do you want something for commuting across town or campus? Or, would you enjoy charging down hills at high speeds? Take a look at the options below and note which features work well for the type of skating you want to do.
You’re just looking for a quality skateboard to buy for a beginner (either you or someone you know), but you have no idea where to start. You see bearings, hardware, wheels, decks, and trucks being advertised but don’t want to spend hours researching which individual part to buy. This is how I felt when I was first looking to but a complete skateboard for my nephew for Christmas many years ago. I wanted something that he would love, but also that was safe and would not break the bank. After researching and making a decision I thought it would be useful to share this information with others who may be in a similar situation.
Well, independent skateboard brands, like Birdhouse skateboards or Blind Skateboards are prevalent. The DIY factor over the various skateboarding brands of course, acquires attention for the beginners in skating. But, for intermediate and expert level jumps, the names of best selling skateboard brands rule the market. Everyone considers the top 10 skateboard brands, but we have explained the top 12 skateboard brands for you. Why do we consider these top 12 skateboard brands? Well, our inclination lies in quality and efficiency. Whether, you belong to the beginner or expert level, whether you seek for the skateboard shoe brands or skateboard deck brands, we are here to assist you.
Unlike California, where the sun always shines and the pavement has never seen snow and salt, New York only has a handful of skate brands. Funny when you think about the rich history skateboarding has in the City. 5Boro is one of the brands that has been keeping the tradition alive for more than a decade, and next time you see founder Steve Rodriguez out skating, thank him for making so much happen for skaters in NYC.
The brand based in Vancouver provides skateboards featured with construction of fiberglass and bamboo, Rayne longboards assure the best skating experience you can imagine. Decks made by Rayne has the ultimate crispy flow produced from the highest quality bamboo. The boards come with unique designs that standing out with the cool personality that beats other competitors in the market.
Punked Skateboards is one of the top selling skateboard brands. With their innovative designs, quality boards and a variety of longboards and skateboards, Punked has taken all of the skateboard companies in the world by storm. Their brand has created a variety of boards for beginners, intermediates and even pros, so that they always have the right skateboard for you.
Keep in mind that the deck width will also affect the size of the trucks that you use. You’ll need wider trucks to make a wider deck more stable. If you see a wide deck with narrow trucks, you can expect the ride to be wobbly and hard to manage. Pay attention to the bushings on the board as well. If the bushings are very firm, you’ll have a more stable ride, but it also makes it harder to turn. Soft bushings are much more responsive, but you do lose a little bit of stability. If you don’t know if your bushings are firm or soft, you likely have soft bushings, since this is the default.
Baker is a classic good old fashioned, anti-establishment skateboard brand. Baker has a great professional team including founder Andrew Reynolds. Reynolds is also heavily involved in other well-known skateboard brands like Deathwish, Emerica, and Shake Junt. Notable street artist Neckface has a limited edition line of Baker decks that is one of the coolest in skateboarding in my opinion.
Skate graphics have often incorporated blood, guts, and gore into board and T-shirt designs, but few brands render gnarliness quite as well as Heroin Skateboards. It's no surprise that a brand founded by artist Mark “Fos” Foster would have such tight art direction. Fos has a loose, low-fi handstyle that can be see in much of the brand's designs, and the delinquent band of team riders and their antics are a perfect embodimentof whatever “image” Fos is after.
The criteria used to select the brands featured varies – some are included due to their commitment to technological innovation and for their efforts to improve the products they offer through experimentation, others are included for what they offer in terms of cultural depth and for their contributions to skateboarding culture as a whole, whether that be through graphics, video output or simple attitude.