The skateboard has a solid and stiff mini-deck, which is around 22 inches and constructed out of 100% plastic material. Such deck is very lightweight. It is only four pounds but you have an assurance that it can handle up to 198 lbs. of weight. You will also fall in love with the board as it comes in 23 graphics and colors, so picking a favorite is much easier.
The Quest Super Cruiser is made of Canadian Maple and measures 31″(787mm)x8″(203mm). It has a maximum capacity of 500 lbs. The wheels have a size of 1.99″(50mm)x1.42″(36mm) Pu with logo printing. The pattern is heat transferred. The trucks are 5″ heavy duty aluminum alloy. This skateboard can provide you a high-quality ride with an entry-level price. This is the best skateboard for both beginners and price-conscious expert skaters. It has an average rating of 4.3 on Amazon.

I rode for them as a ‘Amateur’ skateboarder in ‘79-’80, and they, at that time, had one of the Best boards out on the market, made of Fiberglass in a torsion box, with a foam core, and urethane ‘bumpers’ all around. I still have that board, and one set of C-70 Reds from then. I skated that gear hard, for many years, too. I still own 6–7 full sets of “krypto’s” for skateboards, and 8 that’re on quad-roller-skates. Great wheels, and they’re still in use.
Almost every skate shop will have a wall of boards that is either organized by brand, size, or alphabetically. At our CCS skate shop, we have multiple walls of boards that we try and keep ordered alphabetically. A wall of skateboards, at first glance, can be overwhelming, but if you know what size and roughly what brands you like, it should be fairly easy for you to figure out what board you want. Now would be a good time to mention our CCS Skateboard Buyer’s Guide, specifically the Decks Guide. In the CCS Decks Guide, you’ll find all the information you need to gain a basic understanding of skateboard decks.

“As far as the actual look of the vast majority of contemporary graphics goes, I’d say that it feels to me as if something has been lost. It’s down to what you can do with modern heat transfer printing techniques – you can literally just take a photograph from the Internet and print it identically straight onto a skateboard. Speaking personally, there’s very little to challenge you there: either from the point of view of creating graphics, or from the consumer’s perspective. Whereas back when screen-printing was the norm, every time a graphic was produced the artist was physically cutting the key line out by hand. The key line is the final black line that forms the outline of whatever it is that you’re printing and ties in all the other colours together. You can see this in the early Sean Cliver graphics for example, where it’s clear that he has hand cut the key lines as precisely as he was able to, but looked at from today’s perspective they’re not perfectly precise, which is what gives Cliver’s earliest stuff its specific look in my opinion.”


It is safe to say that Zero’s identity as a skateboard brand was built primarily on its skate videos which began in (1997) with Thrill of It All, there followed Misled Youth (1999), Dying to Live (2002), New Blood (2005), Strange World (2009), Cold War (2013) and No Ca$h Value (2014) with each video upping the ante in terms of the levels of danger involved.
Just like our previous skateboard, also produced by Punisher, the Elphantasm looks just as attractive as its sister model, the Butterfly Jive. Both have very outgoing designs that can fit the style of skating for many riders nowadays. The highly artistic image of this skateboard is, as Punisher states, one of its main attractive features. Combining the high-quality design with the quality craftsmanship of the Candian Maple deck has been one of Punisher’s better choices. It makes this board one of the most durable skateboards out there.
Whilst this A – Z is by no means exhaustive and there are many brands, both new and old that are not included, we feel that this cross section of companies represents a selection of some of the best choices out there today. The following list of 29 skateboard brands, beginning with Alien Workshop and ending with Zero, covers a huge range of the alternatives within the current market and will hopefully act as a handy guide to those dipping their feet into our world for the first time.
Made with bamboo and fiberglass, this board is tough, flexible, and ready for anything. The construction is designed to feel and act like a snowboard. The drop-through design is perfect for freestyle longboarding, commuting, carving, pumping, and more. It gives you better stability and more wheel clearance. The board is definitely best designed for carving but tricks and kicks are easily done as well.
If Supreme wasn’t featured on this list, we might get a long list of hate in the comments, but I’m not adding it just to satisfy the hypebeasts. Over the past few years, what was previously dismissed as a brand that catered mostly to resellers has once again gained a spot at the forefront of what is important in skateboarding today. With the release of cherry in 2014, Supreme showed the world that they haven’t forgotten their roots, and reminded us they will always be a skateboard company first and foremost.
Chocolate Skateboards is a skateboarding company distributed by Crailtap. Following on the heels of Girl, Chocolate was launched in 1994 by Mike Carroll and Rick Howard and is known by its Chocolate hearts logo. Their skateboards are made of durable seven-ply maple. Graphics are also important to the Chocolate brand, and you will find things such as classic cars or cartoons. You can find complete Chocolate skateboards with deck, trucks, wheels and bearings, customized decks, accessories, and apparel. The Chocolate team consists of Vincent Alvarez, Kenny Anderson, Chico Brenes, Justin Eldridge, Jesus Fernandez, Chris Roberts, Elijah Berle, Stevie Perez, Raven Tershy, and Jerry Hsu.

With the evolution of skateparks and ramp skating, the skateboard began to change. Early skate tricks had consisted mainly of two-dimensional freestyle manoeuvres like riding on only two wheels ("wheelie" or "manual"), spinning only on the back wheels (a "pivot"), high jumping over a bar and landing on the board again, also known as a "hippie jump", long jumping from one board to another, (often over small barrels or fearless teenagers), or slalom. Another popular trick was the Bertlemann slide, named after Larry Bertelemann's surfing manoeuvres.
“I think it’s just also like, people want to have fun. If you watch say those types of Street League type of skateboarders, who are super amazing skateboarders that can push these crazy tricks down rails and stairs, like switch tre down fifteen stairs or whatever trick they do — it’s amazing to see that level of skating, but if you are an average Joe living in a small town you’re just like, “I’m never going to be able to kickflip back noseblunt twenty-stair rails”. That’s always the biggest trick. If you ask me it’s like, “What videos do you really enjoy?” The videos that you can some how relate to. Like, “Hey, I could actually do some of these tricks.” You connect to it and you feel like you can picture yourself being a part of the whole thing. When people put out these amazing super stunt skateboarding videos, pushing it to the furthest level possible, that’s rad in one sense, but to me personally as a kid I could never in my wildest dreams believe that I could do that too. I respect it. I understand it. But does it make me want to go skate? No.”
Rodney Mullen and Marc Johnson originally formed Enjoi Skateboards, one of the most innovative skateboarding brands. With the help of other professional skateboarders, they created the infamous “A-Team”, a group of skateboarders representing Enjoi. They have seen many changes over the years and have said goodbye to many great members of the Enjoi team. However, the one consistent trait is that they have continued to stand behind their signature panda boards, which are unique to other skateboarding brands. This is an all-around good brand providing quality boards great for beginners, which makes them a great skateboarding brand.
Next, you’ll need to look at the deck material. Decks are typically wooden or plastic, but they may also be made of materials like carbon and fiberglass. Plastic boards, like the pennyboard, are more affordable, and still very durable, but many adult riders find that they can look a bit like a child’s toy rather than a “real” skateboard. Wood is the most popular choice for most skateboards, although if you want to invest in the pricier fiberglass or carbon options, you’ll get a very good quality deck for your money.
Following The Real video, the brand released full-length videos at regular intervals, with each release being celebrated as a classic overview of the era involved. 1997’s Non-Fiction, featuring founder Jim Thiebaud and a revamped team including the likes of Mark Gonzales, Keith Hufnagel, Joey Bast, Drake Jones and one-time Real female rider Jamie Reyes is seen these days as one of the precursor’s of skateboarding’s general shift away from unbridled technical progression towards a heavier emphasis on style.
Founded in 1994, and going strong ever since, Globe is one of the top quality skateboard brands in the world. They are a global producer and distributor of skateboards and skateboarding gear; selling products in over 100 countries. This is the best brand of skateboard. They are known for their purpose-built apparel, skateboard decks, trucks, wheels, etc, footwear and major surfing and skateboarding events (just to name a few of their ventures). Due to their presence in the boarding industry, Globe has gradually become one of the best skateboard brands in the market.

The hoopla team helped to publicize just how well women can skate, and helped to create an onramp to skating's main road. Young girls and women have taken this opportunity so seriously, that they are no longer content to be part of a separate but equal skate community. In this era of the "Me Too" movement, shattered glass ceilings, and equality of pay, women have chosen to participate on each major company’s skateboard team, instead of supporting brands like hoopla, created just for women.

Regardless of the length of these boards, they each have several components in common that include a deck, grip tape, trucks, and wheels. The deck is the actual surface piece of the board on which a rider stands to perform tricks or control their degree of motion. Decks range between seven and ten inches in width and although seven-ply wood is the most common material for them, they can also be crafted out of bamboo, carbon fiber, and even plastic. Decks are shaped in several unique concave designs, which include radial, progressive, W-concave, tub, and asymmetric. Radial concave decks have U-shaped curves and are ideal for beginners, as they provide one's feet with a reliable grip.
Founded by English freestyle skater, engineer and skateboarding entrepreneur Jeremy Fox in 1987 (Fox is also reputed to be the first person to import skateboard specific footwear ‘Pro-Keds’ into the UK) Deathbox in its heyday was one of only a handful of European brands that ever controlled enough market share to be a significant player in the skateboard industry.

Prior to the mid-seventies many early skateboards were originally based upon the concept of “Sidewalk Surfing” and were tied to the surf culture, skateboards were surfboard like in appearance with little to no graphics located under the bottom of the skateboard-deck. Some of the early manufactured skateboards such as "Roller Derby", the "Duraflex Surfer" and the "Banana board" are characteristic. Some skateboards during that time were manufactured with company logo's or stickers across the top of the deck of the skateboard, as griptape was not initially used for construction. But as skateboarding progressed & evolved, and as artist began to design and add influence to the artwork of skateboards, designs and themes began to change.[92]


Quality wheels won’t mean much if you don’t have nice bearings which allow the wheels to spin freely on the axle of the skateboard truck. A quality set of bearings will spin well right away and actually get even better once broken in a bit. If quality bearings get dirty, they can typically be taken apart and cleaned relatively easily. A good set of bearings typically runs between $10 - $16.
The smaller the wheel diameter, the easier it is to do tricks, because it makes the board sit closer to the ground. But beginners will definitely have an easier time controlling a board with larger diameter wheels. Think of the larger wheels as being akin to training wheels. If you don’t want your board to have “pop” as you are learning, you can choose softer wheels, all the way down to a 73a. They won’t let you go as fast, and you’ll have to push off more often, but they do make it more likely that your board will stay on the ground.
Hanna-Barbera, DC Comics and Todd Francis – at Almost, childhood dreams come true. But on the top sheet, however, is no place for childishness: Willow, Haslam, Song, Mullen and Co. are ripping it on these decks and can hardly be surpassed in ability. To provide the needed strength for the guys Almost has invented the innovative Impact Technology. The two lost places are a minor matter because Almost makes their own thing anyway. Up to 8 layers are available from 62.99 € | 55.00 GBP!
If you are looking to buy a reliable skateboard that will keep you busy for years to come, the Whitey Panda is the ideal choice. It’s a very good entry-level skateboard that can be put through a lot of wear and tear. The solid, metal skateboard trucks ensure that you will be kept sturdy and safe both on and off the ground. This helps the rider feels more confident when doing tricks, no matter where they are.

Well know for their creative cartoon graphics and high-quality deck construction, this Toy Machine complete is another great starting skateboard for beginners.  This deck is slightly larger than 8″ so it would be perfect for adults or people with larger feet who want a more stable ride.  This setup is another good example of generic parts with a pro quality deck for a very reasonable price.  A great option for a beginner who loves the logo and graphic, but wants to save money on the less important parts until they decide they want to take their skating the to next level.


I really recommend searching up a local skate shop man. Get a shop deck instead of a company deck ya you look cool.with a gold primitive deck but all skateboards do the same thing.shop decks are much more cheaper With really good quality wood too, your shoe size don't matter at all my friend is 6' with a size 13 shoe and rides a7.75 lol. But the smaller the board the easier to flip the board with tricks. A more wider board gives you more room to land on doing stairs and gaps. Me i ride a8.25 i love it but at times i feel like riding an 8.1. Most local shops will give you a free sheet of griptape instead of wasting like 10$ on one. Trucks i recommend thunder hollow lights. They're so light on you skateboard and are durable. Hardware are the bolts that hold it all together i really like having colored ones so i can tell the nose and tail of the board. Wheels get spitfire man street tech formulas i love them so much about 25$ though. It's worth it tho. Bearings you can spit fire bearings too thet are ok but the more expensive the bearings the better. There's also bones red bearings another great bearing brand. In total cost bro it should come to around 120$ or just a slight bit more. For skate shoes always get sued shoes they last way longer and have better grip. To learn the basic tricks go to YouTube and look up braille skateboarding. He teaches you the basics very clearly and detailed where to put your feet and stuff. Not only that YouTube channel look at different skate videos youll get inspired to land that trick too. Skateboarding is sick bro no one tells you how to skate you know it's pure freedom. Hopefully you get a mean Ass setup man and get to skating!!! Remember skate or die !!!!

Graphically speaking, Welcome is very distinctive, with an emphasis on hand drawn imagery and references to esoteric and occult themes mixed with bright colourways. Welcome Skateboards also offer a detailed shape guide on their website, detailing the exact dimensions of all of their 38 custom shapes, which again differentiates their product from many of the skateboard brands on the market.
Well, independent skateboard brands, like Birdhouse skateboards or Blind Skateboards are prevalent. The DIY factor over the various skateboarding brands of course, acquires attention for the beginners in skating. But, for intermediate and expert level jumps, the names of best selling skateboard brands rule the market. Everyone considers the top 10 skateboard brands, but we have explained the top 12 skateboard brands for you. Why do we consider these top 12 skateboard brands? Well, our inclination lies in quality and efficiency. Whether, you belong to the beginner or expert level, whether you seek for the skateboard shoe brands or skateboard deck brands, we are here to assist you.
The Skatro Mini Cruiser Skateboard includes Abec 7 Skatro Bearings, 59MM Urethane Skatro wheels, and 3-inch lightweight aluminum trucks.  The Skatro Flexy Technology ensures optimal flex on every board. Skatro outperforms most of the leading brands and it has an amazing value.  You can take this board on the subway, plane, train, and even on the bus.  It includes a color matching T-tool.  It has the best rating of 4.8 on Amazon.
I really recommend searching up a local skate shop man. Get a shop deck instead of a company deck ya you look cool.with a gold primitive deck but all skateboards do the same thing.shop decks are much more cheaper With really good quality wood too, your shoe size don't matter at all my friend is 6' with a size 13 shoe and rides a7.75 lol. But the smaller the board the easier to flip the board with tricks. A more wider board gives you more room to land on doing stairs and gaps. Me i ride a8.25 i love it but at times i feel like riding an 8.1. Most local shops will give you a free sheet of griptape instead of wasting like 10$ on one. Trucks i recommend thunder hollow lights. They're so light on you skateboard and are durable. Hardware are the bolts that hold it all together i really like having colored ones so i can tell the nose and tail of the board. Wheels get spitfire man street tech formulas i love them so much about 25$ though. It's worth it tho. Bearings you can spit fire bearings too thet are ok but the more expensive the bearings the better. There's also bones red bearings another great bearing brand. In total cost bro it should come to around 120$ or just a slight bit more. For skate shoes always get sued shoes they last way longer and have better grip. To learn the basic tricks go to YouTube and look up braille skateboarding. He teaches you the basics very clearly and detailed where to put your feet and stuff. Not only that YouTube channel look at different skate videos youll get inspired to land that trick too. Skateboarding is sick bro no one tells you how to skate you know it's pure freedom. Hopefully you get a mean Ass setup man and get to skating!!! Remember skate or die !!!!
Spotting a poorly made skateboard deck can be hit or miss. Some toy skateboards don’t even try to look “real". They might have no concave to their shape and may not even have a extended nose. Others may be shaped to resemble a real skateboard, but are made with cheap woods and fillers. If that is the case, they may be both thicker and heavier than a quality board, or they may be ready to fall apart quite quickly and easily. Consider that it isn’t easy to make a real skateboard deck. Most legitimate skateboard decks will sell for somewhere between $35 - $55. If you are paying that much for the entire skateboard, it is unfortunately a sign that significant corners were cut on quality. 

If you love skateboarding, then it is a must for you to invest in a high-quality backpack or bag. It is an essential gear, especially if you are someone on the go. You need it as it lets you bring all the things and items you need while you are riding to work or school – that’s possible while still ensuring that you bring your board with you all the time.
Moose boards are very solid in all categories. They are low priced, available in a variety of different shapes and sizes, and have been around for a while so they’ve built up a reputable brand name. You won’t go wrong buying a pack of Moose blanks if you’re the type of guy that goes through decks quickly or is looking to resell them at your local skatepark.
As loosely defined as Bronze is, Peter Sidlauskus seems to be incapable of doing anything wrong in his marketing for the brand, endlessly putting out amazingly hilarious and gnarly New York based edits featuring a loose group of guys we can say make up their “team.” Bronze brings an aesthetic that falls somewhere between vaporwave and deepweb, and is always making gear that you can rock on the daily, from pink dad hats to coaches jackets. You might have even seen their flip of the Windows 98 logo on the backs of people like ASAP Nast.
Huf has come a long way since its humble beginnings slinging the best sneakers and streetwear in San Francisco's Tenderloin District. Keith Hufnagel and his team quickly outgrew the boutique niche and have becomea full blown skate apparel and footwear brand. Today Huf has a stacked teamed (including low-key legends like Joey Pepper, who recently got a signature shoe), a wildly popular range of product (weed socks, anyone?), and some hefty celebrity co-signs.
A precursor to the extreme sport of street luge, that was sanctioned by the United States Skateboarding Association (USSA), also took place during the 1970s in Signal Hill, California. The competition was called "The Signal Hill Skateboarding Speed Run", with several competitors earning entries into the Guinness Book of World Records, at the time clocking speeds of over 50 mph on a skateboard. Due to technology and safety concerns at the time, when many competitors crashed during their runs, the sport did not gain popularity or support during this time.[36][37]
George Powell continued in business as the Powell Corporation and the brand released numerous videos throughout the 90’s and 00’s, including titles such as Suburban Diners (1994), Scenic Drive (1995) and FUN (2009), whilst simultaneously kick starting the careers of many skaters who went on to become household names such as Chris Senn, Adam McNatt and the UK’s own Danny Wainwright, along with stalwart Bones Brigade member Steve Caballero who stayed with the Powell brand throughout.

Our only issue with Penny skateboards is that they are sold without grip tape. Though not necessary, it can make the ride a lot safer with grip tape. All in all, Penny is one of the top skateboard brands out there. Let us now look at a succinct brand scorecard of Penny Skateboards and see how it scores in various factors that we have considered while ranking the best skateboard brands.
Now venturing into making boards through a sister company Jamaica after running a line of them under their own Bronze name, Bronze has not slept after catching their first break of success. They recently collabed with Palace on a collection that instantly sold out, and have already dropped the successful first half of their collaboration with HUF. Keep an eye out for the second installment of that coming soon.

Fox and Deacon re-branded Deathbox in 1991 as Flip skateboards and announced the four man team as consisting of Geoff Rowley, Rune Glifberg, Andy Scott and Tom Penny. After nearly being put out of business when a flood destroyed much of their stock, Fox, Deacon and the four team riders began to plan their move from the UK to Huntington Beach, California in order for the brand to grow further.
×