Severe injuries are relatively rare.[103] Commonly, a skateboarder who falls suffers from scrapes, cuts, bruises, and sprains.[103] Among injuries reported to a hospital, about half involve broken bones, usually the long bones in the leg or arm.[102] One-third of skateboarders with reported injuries are very new to the sport, having started skating within one week of the injury.[102] Although less common, involving 3.5–9 percent of reported injuries, traumatic head injuries and death are possible severe outcomes.[102]
Playwheels Disney Skateboard For Kids is a 21″ Wood single kicktail deck with painted edges.  It has clear sand spray top grip with color graphic and full-color bottom graphics with a retro shape.  It features multi-colored composite truck and baseplate components with carbon steel axles.  This is great for kids who are starting to learn skating.  It has an average rating of 4.2 on Amazon.
Decks come in a variety of shapes and sizes. You can choose a mini-board, a cruiser, a drop-through, or a standard deck for your favorite set of wheels and hardware. Widths range too from a few inches with a 22-inch board to the wide size of a true cruiser. Some decks are flat as possible while others are significantly concave for optimized turning. You can buy a deck with artwork and grip tape already attached for a quick install or you can get a bare-bones wooden deck to truly customize.
If you want to do cruising and street style on the same board then you probably want a large board and larger wheels, as many have already commented. I think that an 8 inch board with at least 56 mm wheels will be best. I think that you should find a local shop to support and to talk to about gear. I would advise getting a shop deck, with Independent trucks (at the correct width for your board, which is one detail that a local shop should be able to help with) Bones street tech formula wheels (I like profiles 1 and, I think 5), and Bones Reds bearings (not super reds, super reds are not super).

Powell Peralta has gained increasing popularity in the 1980s, when skateboarding became an increasingly more sought-after action sports. Since then, they have been developing skateboards tailored to customers, taking reviews and critiques into consideration every time they were building a new model. The Powell Golden Dragon is a direct result of such careful consideration and tailored-modeling.
Where do you live? I forget that this is a global community. If you're US/CA I would recommend going to a local shop and testing some out and see what you like the most cause a Girl will be different from an Almost from an Expedition in very little ways that might turn you off the board shape more than their graphics/team. I would get between a 8" and 8.25" deck though.
500AlmostAluminatiAnti HeroArborBambooBirdhouseBlindBonzingCometCreatureDarkstarDB LongboardsDogtownDusters CaliforniaElementEnjoiEverseshFlipFocusFoundationGlobeGoldCoastGravityHabitatJartKebbekKrookedLandyachtzLaybackLushMadridMakahaMoonshine MFGOmenPennyPlan BPowell PeraltaPrism SkatePunkedRayneRealRememberRivieraRoad RiderSan ClementeSanta CruzSector 9Suicidal SkatesToy MachineWarehouseZ-FlexZero
This deck is 6-inches-by-22.5-inches with that classic cruiser shape. The board is made with 6-ply bamboo and maple construction, which is lightweight, flexible, and eco-friendly. Bamboo Skateboards claims this board has a turning radius not seen in most mini decks. The small, blank deck is heavy duty and durable in a way not all mini cruisers are. This non-carbonized board is ready for you to slap on the grip tape and artwork you want and then get riding.
Rarely you make notice your deck to lose concavity or flatten over time.  Although this isn’t very common, it’s typically due to water damage and is a sign of many other problems.  Wooden decks are not meant to get wet and they will warp, crack, and break if they get soaked.  It’s pretty simple and straightforward  to avoid this problem.  Keep your skateboard in a dry place, and don’t skate in the rain or through puddles.  Skating through water will also destroy your bearings, if deck warping and breaking wasn’t a good enough reason for you to not do it.
You can get a lot of advice (and maybe too many opinions) from fellow skaters. Some of it might not be as informed or educated as a shop owner's (and some might be flat-out bad advice), but it should at least be sincere! If you don't have a local skate park, or are too uncomfortable to walk up to people and ask, you can also ask around on a skateboarding forum. People there will be more than happy to tell you what they think about deck brands.
If you didn’t already know, the “nose” of a skateboard is typically the front and the “tail” is the back.  When you fall or slip and your board slams into curbs, fences, or other hard objects, it’s common for the wooden ends to chip or become damaged upon impact.  Over time these chips can make it harder to preform tricks and even just cruise around.  These chips can be prevented by buying a carbon fiber or non-wood deck, or by there are some metal edges available that can be installed on the nose and tail.
500AlmostAluminatiAnti HeroArborBambooBirdhouseBlindBonzingCometCreatureDarkstarDB LongboardsDogtownDusters CaliforniaElementEnjoiEverseshFlipFocusFoundationGlobeGoldCoastGravityHabitatJartKebbekKrookedLandyachtzLaybackLushMadridMakahaMoonshine MFGOmenPennyPlan BPowell PeraltaPrism SkatePunkedRayneRealRememberRivieraRoad RiderSan ClementeSanta CruzSector 9Suicidal SkatesToy MachineWarehouseZ-FlexZero
Are you on a hunt for the best skateboard on the market today? Then you are in the right place as this comprehensive article is designed to give you information about skateboarding and types of skateboards in general. By learning about the different types of skateboards and what each one can do, figuring out what works for you the best is a lot easier.
Obviously, price is an important consideration for most people when looking to buy anything.  For skateboards, the price of the board is generally a good indicator of quality.  In general, most pro branded skateboards that are made up of high-quality parts are in the $70-$100 range.  You can usually find pro branded decks with average parts for $50-$70, and you can find blank options between $25-$50.  I wouldn’t touch anything under $25, as it is likely poor quality and very prone to breakage.
Graphically speaking, Welcome is very distinctive, with an emphasis on hand drawn imagery and references to esoteric and occult themes mixed with bright colourways. Welcome Skateboards also offer a detailed shape guide on their website, detailing the exact dimensions of all of their 38 custom shapes, which again differentiates their product from many of the skateboard brands on the market.

The magical thing about Supreme is that—despite what some may think—it actually caters to everyone. While they may not go out of their way to make you feel welcome, at its core, the brand is a legendary downtown skate institution, and there is no singular sensibility you can pin on Supreme. It's hip-hop and punk, menswear and streetwear. The unifying aspect is deep roots in skate, music, and art. Beyond that, anything goes.
They have continued to ride that wave over the past year, continuously putting out great edits, following cherry up with Sickness, Red Devil, Joyride, and Swoosh, all in collaboration with cherry’s filmer Bill Strobeck. We all know they will never fall off when it comes to putting out fire gear every new season and drop, but to keep it coming with actual great footage is another story, and is definitely making skateboarding better today.
×