The concave of a skateboard deck is how curved the width of the deck is.  Very few skateboard decks have no concavity and are completely flat as then they would break very easily and be hard to do flip tricks on.  Steep concave decks are the most study and best to do flip tricks on because the slope of the deck catches the skater’s toe or heel more easily and flips the board faster than a shallower deck.  Shallow concave boards are better for cruising around and vert skating as they are more comfortable on your feet and more controllable.  In practice, these recommendations are pretty general and it ultimately comes down to personal preference on the the best deck concavity.  But if you have no idea, following the recommendations or picking a board with moderate concavity is a good place to start.
Manufacturers started to experiment with more exotic composites and metals, like fiberglass and aluminium, but the common skateboards were made of maple plywood. The skateboarders took advantage of the improved handling of their skateboards and started inventing new tricks. Skateboarders, most notably Ty Page, Bruce Logan, Bobby Piercy, Kevin Reed, and the Z-Boys started to skate the vertical walls of swimming pools that were left empty in the 1976 California drought. This started the "vert" trend in skateboarding. With increased control, vert skaters could skate faster and perform more dangerous tricks, such as slash grinds and frontside/backside airs. This caused liability concerns and increased insurance costs to skatepark owners, and the development (first by Norcon, then more successfully by Rector) of improved knee pads that had a hard sliding cap and strong strapping proved to be too-little-too-late. During this era, the "freestyle" movement in skateboarding began to splinter off and develop into a much more specialized discipline, characterized by the development of a wide assortment of flat-ground tricks.
Taotao Girls Skateboards comply to United State Consumer Product Safety Commission (CPSC) Standard.  It has a 24″ X 6″ Maple Double Kickside Deck. It features 608Z Bearings, 3.5″ Plastic Truck & Base, and 50 x 30 mm PVC Wheels.  The Safety helmet, Knee and  Elbow Pads also comply to CPSC Standard.  It has a Cool Pink Aloha Graphic Design with an Amazon rating of 4.3.
Habitat proved itself as an established power in skateboarding when it survived the downfall of the parent company that owned and killed Alien Workshop, being able to persevere and even name new pros through the whole restructuring. They moved their products under Tum Yeto Collective, the parent company/distribution house of other powerhouse skateboard brands like Toy Machine, and now it’s as if they were never in any danger. If you have any doubts about why Habitat is on this list, just watch Mark Suciu’s part in Search The Horizon and never question it again.
Signature Sick Graphics – bLind initially used a grim reaper as their signature design. Today, they still use the grim reaper along with several other skull graphics. Decks are often released with sick graphics of flame engulfed skulls, high detailed grim reapers or graffiti blocks. The graphics used on bLind decks are one of a kind masterpieces that loudly display the bLind company message.
In 1975 skateboarding had risen back in popularity enough to have one of the largest skateboarding competitions since the 1960s, the Del Mar National Championships, which is said to have had up to 500 competitors. The competition lasted two days and was sponsored by Bahne Skateboards & Cadillac Wheels. While the main event was won by freestyle spinning skate legend Russ Howell,[30][31] a local skate team from Santa Monica, California, the Zephyr team, ushered in a new era of surfer style skateboarding during the competition that would have a lasting impact on skateboarding's history. With a team of 12, including skating legends such as Jay Adams, Tony Alva, Peggy Oki & Stacy Peralta, they brought a new progressive style of skateboarding to the event, based on the style of Hawaiian surfers Larry Bertlemann, Buttons Kaluhiokalani and Mark Liddell.[32] Craig Stecyk, a photo journalist for Skateboarder Magazine, wrote about and photographed the team, along with Glen E. Friedman, and shortly afterwards ran a series on the team called the Dogtown articles, which eventually immortalized the Zephyr skateboard team. The team became known as the Z-Boys and would go on to become one of the most influential teams in skateboarding's history.[27][33][34]
If you are looking for a skateboard that will provide you with all the necessary features you need to ride safely and efficiently, then the Punisher Butterfly Jive will be the perfect board for you. No matter if you want to give this skateboard to one of your kids or if you want it for yourself, it has the perfect size to fit just about anyone. This makes it very versatile, and is able to be used by nearly every age range.
Real Skateboards are also notable for the brand’s deep involvement in raising awareness and funds for charitable concerns related to the skateboard community across the globe with the brand supporting everything from DIY skatepark builds, to releasing bespoke Real boards for fallen members of the skateboarding community including releasing a board in memory of UK skate shop owner and stalwart of the British skate scene Steven ‘Bingo’ Binks back in 2011.

“As far as the actual look of the vast majority of contemporary graphics goes, I’d say that it feels to me as if something has been lost. It’s down to what you can do with modern heat transfer printing techniques – you can literally just take a photograph from the Internet and print it identically straight onto a skateboard. Speaking personally, there’s very little to challenge you there: either from the point of view of creating graphics, or from the consumer’s perspective. Whereas back when screen-printing was the norm, every time a graphic was produced the artist was physically cutting the key line out by hand. The key line is the final black line that forms the outline of whatever it is that you’re printing and ties in all the other colours together. You can see this in the early Sean Cliver graphics for example, where it’s clear that he has hand cut the key lines as precisely as he was able to, but looked at from today’s perspective they’re not perfectly precise, which is what gives Cliver’s earliest stuff its specific look in my opinion.”
What longboard brand is good? This is a common question that arises when you want to buy a Longboard. The typical answer is a Longboard brand which can fulfill the customer’s demand at an affordable price. Let’s examine all the leading longboard makers in the past year and until now. Let’s also take a look at their feature, quality, design, color, small parts, and many other relevant criteria.
Spotting a poorly made skateboard deck can be hit or miss. Some toy skateboards don’t even try to look “real". They might have no concave to their shape and may not even have a extended nose. Others may be shaped to resemble a real skateboard, but are made with cheap woods and fillers. If that is the case, they may be both thicker and heavier than a quality board, or they may be ready to fall apart quite quickly and easily. Consider that it isn’t easy to make a real skateboard deck. Most legitimate skateboard decks will sell for somewhere between $35 - $55. If you are paying that much for the entire skateboard, it is unfortunately a sign that significant corners were cut on quality. 
The Californian brand has performed nothing less than a triple flip and catapulted itself from #11 exactly into the centre to #8. This isn’t only nice for us, but also for skatedeluxe team rider Denny Pham, who literally stands on Flip. How hard you can skate these decks is also shown by his team colleagues Arto Saari, Louie Lopez, Curren Caples and Co. Price: from 64.99 € | 55.00 GBP!

Tensor trucks are the most highly engineered skateboard trucks on the market. Tensor trucks are like the Cadillac of trucks and have the brilliance of skateboarding legend / engineer Rodney Mullen as a driving force. Tensor trucks come in both standard and low designs, and should work excellently in most skateboarding situations. Sort of a perfect all-round well-built skateboarding truck.


If you have a great passion for the downhill ride as well as cruising and you are a beginner of longboarding, then ultimately, this board can satisfy your needs. It’s a versatile board as you can use it for cruising and downhill riding. The board is equipped with the perfect wheel size — not so big and not so small. It is big enough to give you a smooth ride but it is not too big to get wheel bite. Isn’t it cool? The 44 inches size of its wheels is perfect for comfortable cruising as well as riding downhill. It has some flex which will reduce the stress on your ankle and knees.
Keep in mind how tall you are when choosing a board width. Also consider the kind of style you wish to skate. Most technical skaters (the ones who incorporate advanced flip tricks... like Rodney Mullen) tend to favor boards between 7.5 and 7.75 regardless of how tall or small they happen to be. The upper hand of having a thin board allows for quick rotation. The other side of the spectrum is the "go big" skaters (Jamie Thomas is a classic example of a "go big" guy). Most "go big" guys favor size 8.0 and up. The advantage of a wide heavy board feels more stable under your feet while in mid air and while landing (especially those who have big feet). If your a kid you might want to just stick with a 7.66 or smaller.
Huf has come a long way since its humble beginnings slinging the best sneakers and streetwear in San Francisco's Tenderloin District. Keith Hufnagel and his team quickly outgrew the boutique niche and have becomea full blown skate apparel and footwear brand. Today Huf has a stacked teamed (including low-key legends like Joey Pepper, who recently got a signature shoe), a wildly popular range of product (weed socks, anyone?), and some hefty celebrity co-signs.
However, the Golden Dragon does have pretty soft trucks bushings, which means the board will lean very easily and be more responsive to weight distribution. This is good news for more intermediate skaters who want easy turns, but not necessarily great for those who are still learning and may not be familiar with controlling a board. But for the price, and considering the great durability of all the other components, this is a quality choice.
Canadian maple wood decks are the industry standard and is what the vast majority of decks on this list will be made of.  However, is the seller just says “maple” the deck is typically made in China and the wood may be slightly softer and lower quality.  This is more common among the lower cost blank decks, and most pro brands or higher end blanks are typically 100% Canadian maple.  In my opinion, the difference between Canadian and Chinese maple decks is slight and in many cases, a cheaper Chinese deck may be the better option for you if you have a small budget or tend to go through decks very quickly.

One European brand steady killing the game is France’s own Magenta. What Palace is for London, Magenta is for Paris, representing what it means to make do with skating in a place where you will literally get kicked out of everywhere just for riding on your board. With a recent collaboration with adidas, Magenta has shown they can turn their niche image into something with mass appeal, so long as the world will pay attention. Skateboarders already know the brand for their quick-footed style of skating and their unique illustration style, but they should know Magenta for their conscious effort to make sure we all are enjoying the pleasure and the freedom skateboarding brings.

The use of skateboards solely as a form of transportation is often associated with the longboard.[108] Depending on local laws, using skateboards as a form of transportation outside residential areas may or may not be legal.[109] Backers cite portability, exercise, and environmental friendliness as some of the benefits of skateboarding as an alternative to automobiles.
OneHype Designer Board has its own one of a kind design which is placed through a heat transfer and not a sticker. It measures 8″ W x 31″ L. It’s ready to use. It includes shock pads, durable wheels, smooth bearings, colored bushings, and aluminum trucks. The 7 ply maple deck is tough and can handle several impacts. This board is suitable for all ages.
Well know for their creative cartoon graphics and high-quality deck construction, this Toy Machine complete is another great starting skateboard for beginners.  This deck is slightly larger than 8″ so it would be perfect for adults or people with larger feet who want a more stable ride.  This setup is another good example of generic parts with a pro quality deck for a very reasonable price.  A great option for a beginner who loves the logo and graphic, but wants to save money on the less important parts until they decide they want to take their skating the to next level.
Rarely you make notice your deck to lose concavity or flatten over time.  Although this isn’t very common, it’s typically due to water damage and is a sign of many other problems.  Wooden decks are not meant to get wet and they will warp, crack, and break if they get soaked.  It’s pretty simple and straightforward  to avoid this problem.  Keep your skateboard in a dry place, and don’t skate in the rain or through puddles.  Skating through water will also destroy your bearings, if deck warping and breaking wasn’t a good enough reason for you to not do it.
Taotao Girls Skateboards comply to United State Consumer Product Safety Commission (CPSC) Standard.  It has a 24″ X 6″ Maple Double Kickside Deck. It features 608Z Bearings, 3.5″ Plastic Truck & Base, and 50 x 30 mm PVC Wheels.  The Safety helmet, Knee and  Elbow Pads also comply to CPSC Standard.  It has a Cool Pink Aloha Graphic Design with an Amazon rating of 4.3.
Zero Skateboards is one of the American top companies for skateboards that comes out of California. The brand, representing by a skull logo, was founded by professional skateboarder Jamie Thomas and is distributed by Dwindle Distribution. The Zero brand is about rebellion and freedom of expression despite society’s rules. The company offers complete skateboards that come with the deck, wheels, trucks, and bearings, as well as decks you can customize, accessories and clothing. In addition to Thomas, the Zero team is Tommy Sandoval, Dane Burman, James Brockman, Tony Cervantes, Windsor James, Adrian Lopez, Chris Wimer, and Kurt Hodge.
Ancheer 31″ Pro Skateboards are made of 7-ply maple wood and finished with anti-slip grip tape.  It includes 60mm PU wheels ideal for riders who want to carve out sections, obtain speed and higher off the ground for tricks. It features 6″ Tony Hawk Signature aluminum trucks and 32″ long deck with double kick tail which is ideal for perfecting your favorite tricks.  It comes with ABEC-7 skateboard bearings.  It has style and quality which is expected from the most influential skateboarders of all time.  It is one of the best-rated skateboards on Amazon with a rating of 4.8.

Alex Olson’s Bianca Chandôn has quickly blurred and crossed back and forth between the line that currently divides high fashion and skateboarding, pushing an androgynous aesthetic inspired by looks found in Tom Bianchi’s Polaroid book Fire Island Pines, which nobody was ready for. Olson has turned what started off as an idea for a small board brand into a hype machine that has become a hit across the world.


A cruiser board is just that, a board that’s ideal for cruising across town. Cruiser boards have kicktails and are usually about the same size as “popsicle” decks, but with more variety in shapes. Cruisers are ideal for getting around because they are lighter and more nimble than larger longboards, allowing you to bob and weave through urban obstacles. Uniquely shaped cruiser decks have also become popular for transition skating because they add style and flavor without having a strong affect on the way the board skates.
Somehow, in the great effort to fight societal conformity, skateboarding always manages to create its own conformity. Trends in styles of skating and fashion come and go. A brand gets hot for a year or two because it's on trend, then it fades to make way for the next thing. Welcome Skateboards doesn't give a fuck about all that. Yes, they are a little weird. The graphics are vaguely Illuminati, and they can't seem to make a normal shaped deck, but that's just Welcome doing its own thing, and who wouldn't welcome that?
Many of the most popular skateboard brands sponsor teams of skaters, like Zero's Jamie Thomas and Element's Barn Margera. Professional skaters are often good sources of information as to what skateboard you should buy. If a pro skater rides a certain board, there is a good chance that if he or she finds that it is high enough quality you will also like the board. Users looking for a new skateboard will want to research a variety of different brands to find the one that best suits their needs, based on function and features.
It's too cold and dark to skate in Sweden for about six months out of the year. That must be when brand mastermind/artist Pontus Alv schemes on the global takeover he's been orchestrating for Polar. Not only are the brand's hats, tees, and hoodies some of the most coveted gear in the skate universe, the Polar team travels the globe hosting events, filming video clips, and getting people hyped on vigilante-style street skating. Look for Polar to come to your hood and build awesome, illegal concrete skate obstacles under a bridge, then bounce like gnarly, European skate tooth fairies. Good luck finding a tee or hat at this point—hype has made to goods rare, but let's hope as the excitement grows Mr. Alv will expand his distro.
This period was fueled by skateboard companies that were run by skateboarders. The focus was initially on vert ramp skateboarding. The invention of the no-hands aerial (later known as the ollie) by Alan Gelfand in Florida in 1976,[39] and the almost parallel development of the grabbed aerial by George Orton and Tony Alva in California, made it possible for skaters to perform airs on vertical ramps. While this wave of skateboarding was sparked by commercialized vert ramp skating, a majority of people who skateboarded during this period didn't ride vert ramps. As most people could not afford to build vert ramps, or did not have access to nearby ramps, street skating increased in popularity.

Krux make some great trucks. Krux makes "downlows" trucks, that have a lower hanger and kingpin than even Grind King. However, you will need a hex tool to adjust them. The Krux IIIs with Topless System are even lighter, with special bushings that feel broken in from the start, but that also provide a faster snap back into position. Krux trucks are light and low.
^ Jump up to: a b Costello, Becca (November 10, 2005). "Skateboarding is not a sport: Skateboarding the Sacramento streets takes skill, balance and nerve. Just don't call it a sport". Sacramento News & Review. Retrieved December 10, 2012. Despite stickers, posters and T-shirts stating the contrary, it turns out that skateboarding is, in fact, a crime. “In the downtown district, you can skateboard as transportation,” Rafter explained. “Anything other than all four wheels on the ground and getting to where you’re going, they have a problem with.”
(2) Goldchain, Michelle (July 31, 2018). "Why is Pennsylvania Avenue's Freedom Plaza such a failure?". Greater Greater Washington. Retrieved October 30, 2018. One group of people do use Freedom Plaza regularly: skateboarders. The open hardscape and railings of Freedom Plaza make an excellent and popular skate park, though skating there is not actually allowed and Park Police regularly chase skaters from the park.
Skateboarding is one of the most popular alternative sports around the world, for kids and adults alike. But before you hop on a board and take off, it’s important to choose the right kind of board for you. Most beginners will simply grab the board that they like the looks of, and with the endless array of deck art and styles that exist, that kind of attitude can lead to choosing a board that isn’t right to learn on.
Since its inception in 1990, Alien Workshop has gone through a number of changes of ownership, first being bought by Burton Snowboards in February 2008, then purchased from Burton by original Alien Workshop rider and reality TV show star Rob Dyrdek in January 2012. Following Dyrdek’s purchase of the brand and its umbrella company DNA Distribution, (also incorporating Habitat skateboards, Habitat footwear and Reflex bearings), an announcement was made in October of 2013 that Dyrdek would remain as a minority shareholder of DNA Dist, with the majority of shares purchased by Pacific Vector Holdings, (also owners of No Fear clothing and Gatorz sunglasses).
×