Skateboarders from all over know Santa Cruz Skateboards for its “Screaming Hand” logo, designed by legendary artist Jim Phillips, and the monstrous artwork displayed on the decks, including series styles such as their Star Wars and Marvel series. Founded in 1973 and distributed by NHS, Inc., the California based brand is the oldest continuous skateboard company in the world. Santa Cruz boards are made from 100% North American maple and they offer complete skateboards, decks, and cruiser boards. The Santa Cruz Skateboards team consists of 16 professional skateboarders including names such as Blake Johnson, Dylan Williams, Emmanuel Guzman, and Eric Dressen.
Over the years skateboard-deck art has continued to influence and expand the culture of skateboarding, as many people began collecting skateboards based on their artistic value and nostalgia. Productions of limited editions with particular designs and types of collectible prints that can be hung on the wall, have been created by such famous artist as Andy Warhol and Keith Haring. Most professional skateboarders today have their own signature skateboard decks, with their favorite artistic designs printed on them using computer graphics.[100][101]
The Wonnv Retro Mini Cruiser 22 inch Complete Skateboard is 22″ Light Up Clear Banana Skateboard.  It is complete with Light Up Board, Wheels, Metal Trucks, ABEC-7 Bearings, and High-Quality Bushings.  The set also includes 6″ Metal Trucks, High-Speed ABEC-7 Bearings, High-Quality Bushings, and Hardware.  It has a unique Textured Waffle Pattern on Deck and designed for Maximum Grip.  The Deck measures about 22 x 6 x 4″.  It has a 6″ Truck Axle and 3″ Truck Hanger.  It requires 2 AAA Batteries and is recommended for skaters who are 6 years old and Up.  It has a 5 rating on Amazon.
Signature Sick Graphics – bLind initially used a grim reaper as their signature design. Today, they still use the grim reaper along with several other skull graphics. Decks are often released with sick graphics of flame engulfed skulls, high detailed grim reapers or graffiti blocks. The graphics used on bLind decks are one of a kind masterpieces that loudly display the bLind company message.

Hi Everyone! My name is Pete (yes, I’m a real person who lives in a cornfield just outside of Buffalo, NY – well, my house is in the middle of a cornfield!). As a former collegiate athlete in Iowa, I’ve played varsity basketball, volleyball and soccer. I also happen to be an outdoor adventure fanatic who’ll do whatever it takes to never miss my annual week-long wilderness canoe trip in the Northern Ontario wilderness. Sports equipment has come a long way over just the past few years, and I’d love to share with you the latest (and most competitively priced) products that will save you many of the frustrations I’ve dealt with over the years! Please feel free to cruise the site and drop me a line on the contact page if you have ideas for improvements or anything else!
Moose boards are very solid in all categories. They are low priced, available in a variety of different shapes and sizes, and have been around for a while so they’ve built up a reputable brand name. You won’t go wrong buying a pack of Moose blanks if you’re the type of guy that goes through decks quickly or is looking to resell them at your local skatepark.
Moving on to our favorite pick from the Plan B series, Plan B Skateboard Complete Felipe Victory 7.6″ Tensor Assembled, suitable for all kinds of riders, but is an ideal skateboard for intermediate skateboard riders. The deck is made from 100% North American maple and measures 7,6 inches. Its wheels are 52mm TGM wheels which means it is excellent for both street and park skating. We also love its lightweight trucks and heavy-duty aluminium with grade 8 steel kingpins and axles plus the bushings (USA made) and pivot cups. The bearings are rated 5 on the ABEC scale.
However, the Golden Dragon does have pretty soft trucks bushings, which means the board will lean very easily and be more responsive to weight distribution. This is good news for more intermediate skaters who want easy turns, but not necessarily great for those who are still learning and may not be familiar with controlling a board. But for the price, and considering the great durability of all the other components, this is a quality choice.
What the fuck is Bro Style? That's what a lot of skate nerds found themselves wondering at the end of 2012. Bro Style crept onto the scene with a goofy guerrilla-style internet marketing campaign that involved little more than the thumbs up logo. Little by little, product started to trickle out—beanies, snapbacks, pocket tees, socks, and other odd ephemera—and a few video clips. Bro Style is still something of a mystery, but one thing is clear, it's not meant to be taken too seriously. And that is seriously important for the skate industry to remember.
However, this same company decided to ‘Cash-in’ on THE NAME BRAND, and now con-currently sells JUNK , made in China, at WAL MART. DO NOT BUY any ‘longboard’ they sell that has plastic trucks!! They are an accident awaiting a place to occur. I’ve seen wheels (from a company that prided itself on ‘the best wheels’) that are upwards of 4 mm out-of-round, which could easily cause speed-wobbles, even at pedestrian speeds. From my POV, they’ve opened themselves up to possibly numerous lawsuits, just because of the inferior quality, and poor design choices made in order to maximize profit.

The grip tape found on a skateboard can actually be defined as the grainy sheet, which resembles sandpaper that also comes with a sticky underside. Such underside needs to adhere to the deck’s surfaces as a means of increasing traction or grip. No matter what skating style you use, the grip tape is extremely helpful in your attempt to stay on the board.

With Board Blazers LED Cheap Skateboards, you can quickly customize your ride.  There’s no need for any bulky battery pack or wires.  You just need to place the lights under the trucks to do the tricks.  Now, you can cruise safely with style.  It is self-adhesive and every light comes with small, long-lasting, and easily replaceable lithium batteries.  The on/off activation is controlled manually. It includes a set of 4 lights with the matching color.  It is best for all types skateboards, longboards, and scooters. It is the perfect gift for anyone.  It is the most trusted product with a rating of 4.5 on Amazon.
It’s a beautifully designed affordable skateboard that provides an optimum ride for both amateurs and pro riders. Its high-rebound, hand-cast polyurethane wheels are built to deliver best roll and grip during an action. Its 7.625 inches wide and 31.625 inches long top board offers ample grip and stable ride for the beginners who are still learning to stand while riding without any fear of slipping off the board. Its colorful screen-printed bottom lets you ride in style. It is built to meet demanding specifications.
Many jurisdictions require skateboarders to wear bicycle helmets to reduce the risk of head injuries and death. Other protective gear, such as wrist guards, also reduce injury. Some medical researchers have proposed restricting skateboarding to designated, specially designed areas, to reduce the number and severity of injuries, and to eliminate injuries caused by motor vehicles or to other pedestrians.[102]
Quality wheels won’t mean much if you don’t have nice bearings which allow the wheels to spin freely on the axle of the skateboard truck. A quality set of bearings will spin well right away and actually get even better once broken in a bit. If quality bearings get dirty, they can typically be taken apart and cleaned relatively easily. A good set of bearings typically runs between $10 - $16.

TIP: Extra width and short noses make old school boards more difficult to flip or lift off the ground, so they are not ideal for street skating. With some old school boards, the truck mounting holes are drilled to only fit certain trucks, so make note of the truck pattern before you buy the deck. If you’re not sure your trucks will fit, just give us a call and we’ll figure it out. Shop Old School Compatible Trucks
Proper skateboard wheels are made out of polyurethane with minimal additives. Toy skateboard wheels can be made of plastic or a low quality poly mix which leads to poor performance in the best case and even outright dangerous situations with cracked wheels in the worst case. This is a case where brand recognition and reputation can come into play. 
If you didn’t already know, the “nose” of a skateboard is typically the front and the “tail” is the back.  When you fall or slip and your board slams into curbs, fences, or other hard objects, it’s common for the wooden ends to chip or become damaged upon impact.  Over time these chips can make it harder to preform tricks and even just cruise around.  These chips can be prevented by buying a carbon fiber or non-wood deck, or by there are some metal edges available that can be installed on the nose and tail.
Founder Richard Novak is also widely credited as creating the skateboard industry as we know it today by establishing skateboarding as a separate culture and business by wrestling the sport away from the control of the roller-skating industry in the early 1970’s and promoting it through sponsoring events, supporting the nascent skateboard magazine culture, pioneering technologies within skateboard, truck and wheel construction and establishing the edgy cultural identity of skateboarding from the very beginning.
Regardless of the length of these boards, they each have several components in common that include a deck, grip tape, trucks, and wheels. The deck is the actual surface piece of the board on which a rider stands to perform tricks or control their degree of motion. Decks range between seven and ten inches in width and although seven-ply wood is the most common material for them, they can also be crafted out of bamboo, carbon fiber, and even plastic. Decks are shaped in several unique concave designs, which include radial, progressive, W-concave, tub, and asymmetric. Radial concave decks have U-shaped curves and are ideal for beginners, as they provide one's feet with a reliable grip.
In summary - recognizing a real skateboard isn’t rocket science, but it does take some amount of brand awareness and ultimately even trial and error. We tried to take the guesswork out of it by starting SkateXS and openly sharing and celebrating each and every component we use to build our skateboards. Hopefully we have been able to share the values and priorities we put into those design decisions. 

The most recent Girl Films production, Pretty Sweet, signified a passing of the torch for one of the most talented skate teams in the biz. Some may have been disappointed to see Rick Howard and other OGs ride the bench, but new jacks like Alex Olson and Mike Mo Capaldi, and the Trunk Boyz Elijah Berle, Raven Tershy, Stevie Perez, Vincent Alvarez, and Cory Kennedy, leave little doubt that we're in for another 20 years of epic skating and killer goods.


Founded by English freestyle skater, engineer and skateboarding entrepreneur Jeremy Fox in 1987 (Fox is also reputed to be the first person to import skateboard specific footwear ‘Pro-Keds’ into the UK) Deathbox in its heyday was one of only a handful of European brands that ever controlled enough market share to be a significant player in the skateboard industry.

Longboards excel when covering longer distances on roads and bike paths or for “bombing” hills. The wider trucks and wheelbase provide superior stability, and larger wheel options help retain speed for faster commuting. Still, longboards are less responsive than shorter boards and don’t always have kick tails, making them less functional in tight spaces.
Spotting a poorly made skateboard deck can be hit or miss. Some toy skateboards don’t even try to look “real". They might have no concave to their shape and may not even have a extended nose. Others may be shaped to resemble a real skateboard, but are made with cheap woods and fillers. If that is the case, they may be both thicker and heavier than a quality board, or they may be ready to fall apart quite quickly and easily. Consider that it isn’t easy to make a real skateboard deck. Most legitimate skateboard decks will sell for somewhere between $35 - $55. If you are paying that much for the entire skateboard, it is unfortunately a sign that significant corners were cut on quality. 
Spotting a poorly made skateboard deck can be hit or miss. Some toy skateboards don’t even try to look “real". They might have no concave to their shape and may not even have a extended nose. Others may be shaped to resemble a real skateboard, but are made with cheap woods and fillers. If that is the case, they may be both thicker and heavier than a quality board, or they may be ready to fall apart quite quickly and easily. Consider that it isn’t easy to make a real skateboard deck. Most legitimate skateboard decks will sell for somewhere between $35 - $55. If you are paying that much for the entire skateboard, it is unfortunately a sign that significant corners were cut on quality. 
After leaving long time sponsor Birdhouse due to a feeling of dissatisfaction at the manner in which he himself was being marketed as a pro skater, Andrew Reynolds joined forces with a group of similarly aged pro skaters, who at the time, all lived close to each other in Huntington Beach, California in the Warner Ave housing complex and resolved to turn what had formerly been a loosely affiliated crew into a skateboard brand. Reynolds approached Tony Hawk and Per Welinder, owners of Blitz Distribution (and distributors of Birdhouse) with his idea and, rather than losing Reynolds completely, Blitz Distribution agreed to assist Reynolds with Baker and to distribute it.
×