“As far as the actual look of the vast majority of contemporary graphics goes, I’d say that it feels to me as if something has been lost. It’s down to what you can do with modern heat transfer printing techniques – you can literally just take a photograph from the Internet and print it identically straight onto a skateboard. Speaking personally, there’s very little to challenge you there: either from the point of view of creating graphics, or from the consumer’s perspective. Whereas back when screen-printing was the norm, every time a graphic was produced the artist was physically cutting the key line out by hand. The key line is the final black line that forms the outline of whatever it is that you’re printing and ties in all the other colours together. You can see this in the early Sean Cliver graphics for example, where it’s clear that he has hand cut the key lines as precisely as he was able to, but looked at from today’s perspective they’re not perfectly precise, which is what gives Cliver’s earliest stuff its specific look in my opinion.”
A skateboard consists of a deck, trucks, wheels, bearings, hardware, and griptape. All parts come in a variety of sizes, graphics, colors, and signature pro series. The deck is the essential part of any skateboard. The deck ranges generally from 7.5" to 8.5". Skaters choose their board size for many reasons, but the basic deciding factor comes down to style of skating and foot size. Transition skaters usually ride a wider deck, while street skaters tend to go with a smaller deck. Skate brands such as Girl, enjoi, and Welcome offer a wide range of boards in regards to sizes and graphics. Skateboard trucks come in either a high or low setting, and also in a range of widths. The main factors in a truck, are how well they turn, and how well they grind. Independent, Venture, and Thunder, are truck brands that are well known for their turning and grinding capabilities. The skate hardware is generally either Phillips head or Allen key bolts. The skateboard wheels range from 50mm to 60mm. Some brands offer smaller and larger sizes, but 50-60mm is the general range. Like the deck sizes, wheel sizes depend on the skater's choice of terrain: Transition skaters tend to ride bigger wheels, while street skaters usually go with smaller wheels. Bones, Spitfire, Ricta, and Wayward wheel companies all make wheels for any terrain, whether you're a street shredder or a park burner. Skate bearings follow the ABEC rating system, which includes grades 1, 3, 5, 7, and 9. Bones, Bronson, and Andale are some of the top bearing brands in the skate market. CCS proudly carries all these brands, and many more.
Skateboarders from all over know Santa Cruz Skateboards for its “Screaming Hand” logo, designed by legendary artist Jim Phillips, and the monstrous artwork displayed on the decks, including series styles such as their Star Wars and Marvel series. Founded in 1973 and distributed by NHS, Inc., the California based brand is the oldest continuous skateboard company in the world. Santa Cruz boards are made from 100% North American maple and they offer complete skateboards, decks, and cruiser boards. The Santa Cruz Skateboards team consists of 16 professional skateboarders including names such as Blake Johnson, Dylan Williams, Emmanuel Guzman, and Eric Dressen.
Girl skateboards are know for their witty graphics and high quality canadian maple decks. This specific complete features Mike Carroll’s pro deck and it comes fully assembled directly from the manufacturer (Girl). The reason this is such a great option for beginners is that all parts of this complete are truly pro quality and it’s built to last. The width is also perfect for all ages and shoe sizes at a moderate 7.8″. Definitely a great skateboard for beginners if you like the graphic and logo.
The Quest can be considered as the best improving Longboard brand because in 2014 it was in the 4th position, whereas in 2018 it is in 2nd place. This is a good improvement for a Longboard brand in these competitive days! Even though it is now in 2nd place, it has a little gap with Sector 9. They mainly focused on the customer’s needs by collecting client opinions. They have been improving the size, quality, performance, speed, design, and color of their longboards.
Another bonus of shopping at an actual skate shop is that you get to see what the boards look like in person. Most skate shops will have a cool wall of boards, and it's fun to just stand there and look at all the graphics. If one jumps out and grabs you, then you can ask the shop owner about the brand, and whether it's a good one. There's nothing wrong at all with buying a skateboard deck because you like the graphics!
Let’s now move on to our top pick from the Punisher line, the Punisher Cherry Blossom Complete skateboard (31 inch). Hands down, the Punisher Cherry Blossom skateboard is the best skateboard for girls. And I am not just saying this because the cherry design would look best for girls, it has some incredible features and specifications. We love the 9-ply stiff maple deck with a beautiful cherry design. The deck is also covered with coarse grip tape which gives the skateboard excellent grip and it makes it a good ride for girls too.
So now that you have an idea of what size and shape board you like, it’s time to choose a brand. A popular size is an 8.5 skateboard deck. If you were looking for a size 8.5 skateboard deck, you could narrow the decks offered on CCS.com to fit in the 8.25 - 8.5 range. This will show you all the boards in that range, and significantly reduce the boards you have to look through. Now, if you don’t have a preference on board brands, find a graphic you like and you’re all set. If this is your first skateboard or are still learning about what wood and brands you prefer, we recommend checking out a CCS Skateboard. They give you a bang for your buck, that's for sure.
If you didn’t already know, the “nose” of a skateboard is typically the front and the “tail” is the back. When you fall or slip and your board slams into curbs, fences, or other hard objects, it’s common for the wooden ends to chip or become damaged upon impact. Over time these chips can make it harder to preform tricks and even just cruise around. These chips can be prevented by buying a carbon fiber or non-wood deck, or by there are some metal edges available that can be installed on the nose and tail.
This brand gets its name from a slang term for strip club. One video was called “Chicken Bone Nowison,” and it opens with a scene of skater pummeling a security guard. Is that not awesome enough? If there is a company that embodies a more perfect IDGAF attitude in skateboarding, please let me know. For the homies, by the homies is their mantra, which is pretty cool with a team comprised of rippers like Theotis Beasley, Andrew Reynolds, Dustin Dollin, Jim Greco, Terry Kennedy, Lizard King… The list goes on.
The nose and tail of a standard skateboard curve upward slightly to make tricks easier to perform. On most decks, the nose and tail are shaped slightly different. The nose is usually wider, longer and steeper than the tail which aids in nose-based (nollie) tricks, and also helps you differentiate the nose from the tail. Some shaped boards have very different nose and tail dimensions, and some old school boards lack noses all together.
The best criticism you could make about skateboarding in general right now is that it takes itself too seriously. Rightfully so. Skateboarders are often under attack, and what they do is illegal in most places. Skate culture is constantly being ripped off and bastardized. That's why it's so important to have a healthy sense of humor about it all, and that's why it's important that skateboarding has Roger.
By 2001 skateboarding had gained so much popularity that more people under the age of 18 rode skateboards (10.6 million) than played baseball (8.2 million), although traditional organized team sports still dominated youth programs overall. Skateboarding and skateparks began to be viewed and used in a variety of new ways to complement academic lessons in schools, including new non-traditional physical education skateboarding programs, like Skatepass and Skateistan, to encourage youth to have better attendance, self-discipline and confidence. This was also based on the healthy physical opportunities skateboarding was understood to bring participants for muscle & bone strengthening and balance, as well as the positive impacts it can have on youth in teaching them mutual respect, social networking, artistic expression and an appreciation of the environment.
Following stints on the US brands Mad Circle and Arcade and a pro model on the then hugely popular European brand Cliche skateboards, Pontus Alv quit his board sponsor and moved back to his hometown of Malmo, Sweden in the early to mid 00’s. During this time Pontus took what might be called a creative hiatus but which would be more accurately explained as a re-connection with his roots. After returning to Malmo, Alv became heavily involved in building and creating the scene there, working alongside friends to build a number of DIY skatespots through the city such as the now legendary Savanna-side and Steppeside projects.
The Atom has also improved its position from 4th to 3rd in 2018. You can trust these Longboards. They are continuously improving their product quality and increasing communication with general and potential customers. Correspondingly, they provide an opportunity for customers to select from a wide range of style, color, design and price to the customers. If the improving rate becomes constant, it will quickly switch to the upper position immediately.
Lovenskate have produced a number of full-length videos throughout the 16 years of their existence, including the 2015 release Lovenskate – Smorgas’board although more recently they have followed the direction of skate media in general and concentrated on releasing shorter, rider-specific clips such as Jordan Thackeray’s Welcome clip and more recently the Batch Capture series.
Isle is much newer to the game than a lot of the other brands mentioned on the list, but that doesn’t mean they don’t deserve the same respect. Drawn straight from the mind of skateboarder Nick Jensen, a London native with the eye of a true artist, Isle’s graphics could just as easily be hanging in a museum rather than in skate shops. Jensen’s creative process involves him sculpting, painting and photographing every board graphic himself in his own studio, manipulating each art piece to work as a graphic. Isle offers one of the most well developed brand images in skateboarding, due in big part to the fact that it is literally an outlet of one man’s own rampant creativity.
Moreover, we love the amazing variety of skateboards that Plan B has. Plan B’s team consists of some of the most famous professionals out there like Ryan Sheckler, Torey Pudwill and Chris Cole and all of their pro boards are available. Ranging from small skateboards (like Team Tripper mini) that are best skateboards for kids to their full size deck range that starts at 7.6 with the Felipe Flashback deck, Plan B has covered it all. Might I add that their full size skateboards are ideal for a smooth ride in the park and carve out all the turns perfectly. Most of the Plan B skateboards are around the 8 inch to 8.25 inch size which is the most popular size of the skateboard at the moment.
Freestyle skating remained healthy throughout this period, with pioneers such as Rodney Mullen inventing many of the basic tricks that would become the foundation of modern street skating, such as the "Impossible" and the "kickflip". The influence that freestyle exerted upon street skating became apparent during the mid-1980s; however, street skating was still performed on wide vert boards with short noses, slide rails, and large soft wheels. In response to the tensions created by this confluence of skateboarding "genres", a rapid evolution occurred in the late 1980s to accommodate the street skater. Since few skateparks were available to skaters at this time, street skating pushed skaters to seek out shopping centers and public and private property as their "spot" to skate. (Public opposition, in which businesses, governments, and property owners have banned skateboarding on properties under their jurisdiction or ownership, would progressively intensify over the following decades.) By 1992, only a small fraction of skateboarders continuing to take part in a highly technical version of street skating, combined with the decline of vert skating, produced a sport that lacked the mainstream appeal to attract new skaters.
These guys are unabashedly all about London and the party boy lifestyle. The self-aware attitude they carry themselves with shines in the corresponding product copy on their website—it’s contagious and makes you want a piece of it. Everyone from A$AP Rocky to Drake, and even seemingly out-of-touch Jay Z has been seen rocking the gear, and it’s understandable why. Palace’s design team, which includes Fergus Purcell of Marc Jacobs, have created an image that’s been exclusive and dope from its inception, and they’ve yet to break that streak. Who else could follow up a dope adidas collaboration with an excellent pair of penny loafers?
Founded by the pro skateboarder Marc Johnson in the year 2000, enjoi has been on the market for over two decades now. They have since expanded, and started producing skateboarding accessories and clothing apart from just skateboards. Since then, they have adopted a panda as their logo. This logo is featured on most of their products and has quickly become the company’s trademark.