Using 12 years of experience in manufacturing skateboards, Penny Skateboards was created to offer the skateboarding community high performance and high quality plastic skateboards. The brand focuses on creating each Penny skateboard with attention to detail and with the best raw materials. Not only are they meant to look good, but are meant to work just as good if not better.
Tensor trucks are the most highly engineered skateboard trucks on the market. Tensor trucks are like the Cadillac of trucks and have the brilliance of skateboarding legend / engineer Rodney Mullen as a driving force. Tensor trucks come in both standard and low designs, and should work excellently in most skateboarding situations. Sort of a perfect all-round well-built skateboarding truck.
Severe injuries are relatively rare. Commonly, a skateboarder who falls suffers from scrapes, cuts, bruises, and sprains. Among injuries reported to a hospital, about half involve broken bones, usually the long bones in the leg or arm. One-third of skateboarders with reported injuries are very new to the sport, having started skating within one week of the injury. Although less common, involving 3.5–9 percent of reported injuries, traumatic head injuries and death are possible severe outcomes.
The nose and tail of a standard skateboard curve upward slightly to make tricks easier to perform. On most decks, the nose and tail are shaped slightly different. The nose is usually wider, longer and steeper than the tail which aids in nose-based (nollie) tricks, and also helps you differentiate the nose from the tail. Some shaped boards have very different nose and tail dimensions, and some old school boards lack noses all together.
In the early 1970s, Frank Nasworthy started to develop a skateboard wheel made of polyurethane, calling his company Cadillac Wheels. Prior to this new material, skateboards wheels were metal or "clay" wheels. The improvement in traction and performance was so immense that from the wheel's release in 1972 the popularity of skateboarding started to rise rapidly again, causing companies to invest more in product development. Nasworthy commissioned artist Jim Evans to do a series of paintings promoting Cadillac Wheels, they were featured as ads and posters in the resurrected Skateboarder magazine, and proved immensely popular in promoting the new style of skateboarding.
Here's some general guidelines to get you started: Narrower decks are lighter and easier to flip, but you’ll sacrifice some stability. Wider boards are more stable but are heavier and slightly less ideal for some tricks. Skaters who like flip tricks, manuals, ledges, and flat bars usually prefer boards on the narrower side of the spectrum (7.75 – 8.25 inches). Those who skate big bowls, hand rails, or like to jump down large gaps at high speeds are usually more comfortable with a larger board (8.25 – 9.0 inches).
The Golden Dragon is a fantastic board for beginners, and it’s all in the wheels. The high-rebound polyurethane wheels are hand-cast and offer amazing grip as you ride, plus fantastic roll. The deck itself is just slightly longer than a standard skateboard, which offers a bit more stability for beginners, who might be worried about sliding or slipping off a shorter board. Additionally, this board features the All Powell-Peralta Ligament strap, an important safety feature that keeps the deck together if it should break. This helps prevent injury and provides a little more peace of mind for the rider.
In this in-depth guide, we’re going to cover how to choose the best skateboard for beginners, and review the top five beginner skateboards on the market right now. We’ll talk about how to choose the right size, what parts of a skateboard you should pay attention to, how to choose the right shape, choosing the right wheels, and more. First, let’s talk about the top five skateboards for beginners.
The main feature of this longboard is its attractiveness. The color of the board is very vivid and pleasing. Also, the smoothness of the longboard is so much striking. Another unique thing that you will find with this longboard is its wheel bite is zero percent. If you want to attract the attention of the people with your longboard while spending reasonable money, this longboard is the best choice for you. Amazingly, even after one or two years, you will not find any crack on the board.
However, this same company decided to ‘Cash-in’ on THE NAME BRAND, and now con-currently sells JUNK , made in China, at WAL MART. DO NOT BUY any ‘longboard’ they sell that has plastic trucks!! They are an accident awaiting a place to occur. I’ve seen wheels (from a company that prided itself on ‘the best wheels’) that are upwards of 4 mm out-of-round, which could easily cause speed-wobbles, even at pedestrian speeds. From my POV, they’ve opened themselves up to possibly numerous lawsuits, just because of the inferior quality, and poor design choices made in order to maximize profit.
This board also has a unique shape that makes it a lot easier to ease into turns, which is something that longboards aren’t always known for. It’s a lot easier to push off on this deck thanks to how low it sits, and you also get a one-year warranty from the manufacturer should anything go wrong. If you’ve never ridden on a board before, and don’t want to learn tricks right away, this is a great choice, especially if you’ll be riding around a lot of mostly flat areas.
We have unfortunately seen low quality skateboards that even try to use plastic trucks (please avoid). However it can be really hard to spot a poorly made metal truck without skating it. Brand awareness can come into play here again. The manufacturers name should be marked on the trucks. A quality set of trucks (2 per board) could start out as low as around $30 and will go up from there.
The National Skate Co‘s approach to marketing retained this air of intrigue with the release of their first video, ‘The National Skateboard Co. Promo‘ in 2013 with minimal promotion beforehand. This promo video featured lo-fi VX2000 footage of original team members Thomas Harrison, Danijel Stankovic, David Mackey, Joshua Young, Vaughan Jones and Neil Smith interspersed with found footage and black and white news reel clips.
There really isn’t a best brand….I prefer boards that are made in America by small companies or for small companies by mid sized companies. but that’s my general preference Watson and PS Stix also makes boards for a lot of companies (mostly outside the USA from what I understand) I have a couple of Welcome Jordon Sanchez decks (pressed by PS Stix) on my spare board shelf that I can wait to skate.
Krown has been producing skateboards since the late 1990s, which was the time when skateboards lived through a revival and became a popular hobby once again. Since then, Krown’s goal has been to create quality skateboards with budget prices. This has made Krown skateboards well sought after among beginners who want to try out extreme sports, and need a starting board. Even though Krown started out selling only skateboards, they have evolved to also sell longboards, pads, helmets and the alike over the years.
There’s a bit of self-induced CONFUSION with Kryptonics inc. When they first came out, they made, literally, a Revolutionary Wheel, one that BOUNCED. That resilience made them VERY Fast on rougher surfaces, and perhaps even stickier (for a given hardness) than other wheels. You can buy that type of wheel (as a ‘Re-Issue’ “C-Series” in 55,60,65,70+75 mm sizes) now, and it’s STILL HIGH QUALITY, FAST, + STICKY! Even by today’s ‘longboard Race’ criteria, these are wheels to be reckoned with.
They aim to make of the best distinction to recognize among a thousand brands available. Starting from scratch, the brand has become successful with the invention of drop down longboard that convinces skaters around the world to have many advantages. Their belief in “making quality skateboards that will improve life” has never faded as they grow to be in the back of Blackcomb Ski Club. They even plant a tree for every product they make and sell to prove their eco-friendly operation.
Decks come in a variety of shapes and sizes. You can choose a mini-board, a cruiser, a drop-through, or a standard deck for your favorite set of wheels and hardware. Widths range too from a few inches with a 22-inch board to the wide size of a true cruiser. Some decks are flat as possible while others are significantly concave for optimized turning. You can buy a deck with artwork and grip tape already attached for a quick install or you can get a bare-bones wooden deck to truly customize.
If you want to do cruising and street style on the same board then you probably want a large board and larger wheels, as many have already commented. I think that an 8 inch board with at least 56 mm wheels will be best. I think that you should find a local shop to support and to talk to about gear. I would advise getting a shop deck, with Independent trucks (at the correct width for your board, which is one detail that a local shop should be able to help with) Bones street tech formula wheels (I like profiles 1 and, I think 5), and Bones Reds bearings (not super reds, super reds are not super).
Moving on to our favorite pick from the Plan B series, Plan B Skateboard Complete Felipe Victory 7.6″ Tensor Assembled, suitable for all kinds of riders, but is an ideal skateboard for intermediate skateboard riders. The deck is made from 100% North American maple and measures 7,6 inches. Its wheels are 52mm TGM wheels which means it is excellent for both street and park skating. We also love its lightweight trucks and heavy-duty aluminium with grade 8 steel kingpins and axles plus the bushings (USA made) and pivot cups. The bearings are rated 5 on the ABEC scale.
Aside from their prodigious online output since the release of their last full-length video, (often via Daewon Song’s own Instagram account which currently has close to a million followers alone), Almost are also renowned for their experiments in board construction technology – in particular the Almost Impact Support range and the Über Light series which incorporate carbon-fibre into skateboard construction to reduce weight and increase strength/flex.