First, you’ll need to consider the size of the skateboard. Most skateboards are about eight inches wide, but if you have very large feet, or you really want to feel very stable as you learn, consider going with something wider. Remember that the wider you go, the harder it is to learn tricks and to go around curves. If you want to rotate your board mid-air during a jump, you need a board that is no wider than eight inches.
Skateboards can be bought online and in your local stores.  However, choosing a good skateboard can be challenging.  If you are a beginner there are a lot of things that you have to consider.  Aside from the cost, you should also check the entire board such as the wheels, the deck, the trucks, and others.  Here, we have compiled the best skateboards for sale that you can choose from right now.
Without good grip tape, skaters have a tough time staying on top of their board. The main complaints about poor grip tape tend to be that it was never very grippy or lost its grip really quickly. Once again, we recommend trusting in name brands with years of experience supporting skateboarders. Unfortunately, if you are buying a pre-made complete skateboard, you probably won't have access to the brand name of the grip. 
By the 1960s a small number of surfing manufacturers in Southern California such as Jack's, Kips', Hobie, Bing's and Makaha started building skateboards that resembled small surfboards, and assembled teams to promote their products. One of the earliest Skateboard exhibitions was sponsored by Makaha's founder, Larry Stevenson, in 1963 and held at the Pier Avenue Junior High School in Hermosa Beach, California.[12][13][14] Some of these same teams of skateboarders were also featured on a television show called "Surf's Up" in 1964, hosted by Stan Richards, that helped promote skateboarding as something new and fun to do.[15]

Without good grip tape, skaters have a tough time staying on top of their board. The main complaints about poor grip tape tend to be that it was never very grippy or lost its grip really quickly. Once again, we recommend trusting in name brands with years of experience supporting skateboarders. Unfortunately, if you are buying a pre-made complete skateboard, you probably won't have access to the brand name of the grip. 

First, you’ll need to consider the size of the skateboard. Most skateboards are about eight inches wide, but if you have very large feet, or you really want to feel very stable as you learn, consider going with something wider. Remember that the wider you go, the harder it is to learn tricks and to go around curves. If you want to rotate your board mid-air during a jump, you need a board that is no wider than eight inches.
Well, independent skateboard brands, like Birdhouse skateboards or Blind Skateboards are prevalent. The DIY factor over the various skateboarding brands of course, acquires attention for the beginners in skating. But, for intermediate and expert level jumps, the names of best selling skateboard brands rule the market. Everyone considers the top 10 skateboard brands, but we have explained the top 12 skateboard brands for you. Why do we consider these top 12 skateboard brands? Well, our inclination lies in quality and efficiency. Whether, you belong to the beginner or expert level, whether you seek for the skateboard shoe brands or skateboard deck brands, we are here to assist you.
Habitat proved itself as an established power in skateboarding when it survived the downfall of the parent company that owned and killed Alien Workshop, being able to persevere and even name new pros through the whole restructuring. They moved their products under Tum Yeto Collective, the parent company/distribution house of other powerhouse skateboard brands like Toy Machine, and now it’s as if they were never in any danger. If you have any doubts about why Habitat is on this list, just watch Mark Suciu’s part in Search The Horizon and never question it again.
Magenta Skateboards are one of only a few mainland European based brand in this list, founded in Paris and currently based in Bordeaux, France. Magenta’s outlook on skateboarding as a cultural phenomenon, and consequently their output in terms of both products and video, is deliberately at odds with the prevailing conception of skateboarding as represented by most major brands.
Skateboarders from all over know Santa Cruz Skateboards for its “Screaming Hand” logo, designed by legendary artist Jim Phillips, and the monstrous artwork displayed on the decks, including series styles such as their Star Wars and Marvel series. Founded in 1973 and distributed by NHS, Inc., the California based brand is the oldest continuous skateboard company in the world. Santa Cruz boards are made from 100% North American maple and they offer complete skateboards, decks, and cruiser boards. The Santa Cruz Skateboards team consists of 16 professional skateboarders including names such as Blake Johnson, Dylan Williams, Emmanuel Guzman, and Eric Dressen.
The logos you grow up with always mean more to you than the ones that came before or after. I'm not even going to suggest that I can be unbiased about something that means so much to me; but I also like to think that as a skater who has worked within the industry as an artist and a skate rat that grew up in the Midwest, I can separate my love of the activity from my personal feelings about the industry and companies. These are important logos for many reasons. Some are more powerful and meaningful than others but what I'm addressing are icons that have come to represent skateboarding in a lot of ways... succinctly and graphically.
!function(n,t){function r(e,n){return Object.prototype.hasOwnProperty.call(e,n)}function i(e){return void 0===e}if(n){var o={},s=n.TraceKit,a=[].slice,l="?";o.noConflict=function(){return n.TraceKit=s,o},o.wrap=function(e){function n(){try{return e.apply(this,arguments)}catch(e){throw o.report(e),e}}return n},o.report=function(){function e(e){l(),h.push(e)}function t(e){for(var n=h.length-1;n>=0;--n)h[n]===e&&h.splice(n,1)}function i(e,n){var t=null;if(!n||o.collectWindowErrors){for(var i in h)if(r(h,i))try{h[i].apply(null,[e].concat(a.call(arguments,2)))}catch(e){t=e}if(t)throw t}}function s(e,n,t,r,s){var a=null;if(w)o.computeStackTrace.augmentStackTraceWithInitialElement(w,n,t,e),u();else if(s)a=o.computeStackTrace(s),i(a,!0);else{var l={url:n,line:t,column:r};l.func=o.computeStackTrace.guessFunctionName(l.url,l.line),l.context=o.computeStackTrace.gatherContext(l.url,l.line),a={mode:"onerror",message:e,stack:[l]},i(a,!0)}return!!f&&f.apply(this,arguments)}function l(){!0!==d&&(f=n.onerror,n.onerror=s,d=!0)}function u(){var e=w,n=p;p=null,w=null,m=null,i.apply(null,[e,!1].concat(n))}function c(e){if(w){if(m===e)return;u()}var t=o.computeStackTrace(e);throw w=t,m=e,p=a.call(arguments,1),n.setTimeout(function(){m===e&&u()},t.incomplete?2e3:0),e}var f,d,h=[],p=null,m=null,w=null;return c.subscribe=e,c.unsubscribe=t,c}(),o.computeStackTrace=function(){function e(e){if(!o.remoteFetching)return"";try{var t=function(){try{return new n.XMLHttpRequest}catch(e){return new n.ActiveXObject("Microsoft.XMLHTTP")}},r=t();return r.open("GET",e,!1),r.send(""),r.responseText}catch(e){return""}}function t(t){if("string"!=typeof t)return[];if(!r(j,t)){var i="",o="";try{o=n.document.domain}catch(e){}var s=/(.*)\:\/\/([^:\/]+)([:\d]*)\/{0,1}([\s\S]*)/.exec(t);s&&s[2]===o&&(i=e(t)),j[t]=i?i.split("\n"):[]}return j[t]}function s(e,n){var r,o=/function ([^(]*)\(([^)]*)\)/,s=/['"]?([0-9A-Za-z$_]+)['"]?\s*[:=]\s*(function|eval|new Function)/,a="",u=10,c=t(e);if(!c.length)return l;for(var f=0;f0?s:null}function u(e){return e.replace(/[\-\[\]{}()*+?.,\\\^$|#]/g,"\\$&")}function c(e){return u(e).replace("<","(?:<|<)").replace(">","(?:>|>)").replace("&","(?:&|&)").replace('"','(?:"|")').replace(/\s+/g,"\\s+")}function f(e,n){for(var r,i,o=0,s=n.length;or&&(i=s.exec(o[r]))?i.index:null}function h(e){if(!i(n&&n.document)){for(var t,r,o,s,a=[n.location.href],l=n.document.getElementsByTagName("script"),d=""+e,h=/^function(?:\s+([\w$]+))?\s*\(([\w\s,]*)\)\s*\{\s*(\S[\s\S]*\S)\s*\}\s*$/,p=/^function on([\w$]+)\s*\(event\)\s*\{\s*(\S[\s\S]*\S)\s*\}\s*$/,m=0;m]+)>|([^\)]+))\((.*)\))? in (.*):\s*$/i,o=n.split("\n"),l=[],u=0;u=0&&(g.line=v+x.substring(0,j).split("\n").length)}}}else if(o=d.exec(i[y])){var _=n.location.href.replace(/#.*$/,""),T=new RegExp(c(i[y+1])),E=f(T,[_]);g={url:_,func:"",args:[],line:E?E.line:o[1],column:null}}if(g){g.func||(g.func=s(g.url,g.line));var k=a(g.url,g.line),A=k?k[Math.floor(k.length/2)]:null;k&&A.replace(/^\s*/,"")===i[y+1].replace(/^\s*/,"")?g.context=k:g.context=[i[y+1]],h.push(g)}}return h.length?{mode:"multiline",name:e.name,message:i[0],stack:h}:null}function y(e,n,t,r){var i={url:n,line:t};if(i.url&&i.line){e.incomplete=!1,i.func||(i.func=s(i.url,i.line)),i.context||(i.context=a(i.url,i.line));var o=/ '([^']+)' /.exec(r);if(o&&(i.column=d(o[1],i.url,i.line)),e.stack.length>0&&e.stack[0].url===i.url){if(e.stack[0].line===i.line)return!1;if(!e.stack[0].line&&e.stack[0].func===i.func)return e.stack[0].line=i.line,e.stack[0].context=i.context,!1}return e.stack.unshift(i),e.partial=!0,!0}return e.incomplete=!0,!1}function g(e,n){for(var t,r,i,a=/function\s+([_$a-zA-Z\xA0-\uFFFF][_$a-zA-Z0-9\xA0-\uFFFF]*)?\s*\(/i,u=[],c={},f=!1,p=g.caller;p&&!f;p=p.caller)if(p!==v&&p!==o.report){if(r={url:null,func:l,args:[],line:null,column:null},p.name?r.func=p.name:(t=a.exec(p.toString()))&&(r.func=t[1]),"undefined"==typeof r.func)try{r.func=t.input.substring(0,t.input.indexOf("{"))}catch(e){}if(i=h(p)){r.url=i.url,r.line=i.line,r.func===l&&(r.func=s(r.url,r.line));var m=/ '([^']+)' /.exec(e.message||e.description);m&&(r.column=d(m[1],i.url,i.line))}c[""+p]?f=!0:c[""+p]=!0,u.push(r)}n&&u.splice(0,n);var w={mode:"callers",name:e.name,message:e.message,stack:u};return y(w,e.sourceURL||e.fileName,e.line||e.lineNumber,e.message||e.description),w}function v(e,n){var t=null;n=null==n?0:+n;try{if(t=m(e))return t}catch(e){if(x)throw e}try{if(t=p(e))return t}catch(e){if(x)throw e}try{if(t=w(e))return t}catch(e){if(x)throw e}try{if(t=g(e,n+1))return t}catch(e){if(x)throw e}return{mode:"failed"}}function b(e){e=1+(null==e?0:+e);try{throw new Error}catch(n){return v(n,e+1)}}var x=!1,j={};return v.augmentStackTraceWithInitialElement=y,v.guessFunctionName=s,v.gatherContext=a,v.ofCaller=b,v.getSource=t,v}(),o.extendToAsynchronousCallbacks=function(){var e=function(e){var t=n[e];n[e]=function(){var e=a.call(arguments),n=e[0];return"function"==typeof n&&(e[0]=o.wrap(n)),t.apply?t.apply(this,e):t(e[0],e[1])}};e("setTimeout"),e("setInterval")},o.remoteFetching||(o.remoteFetching=!0),o.collectWindowErrors||(o.collectWindowErrors=!0),(!o.linesOfContext||o.linesOfContext<1)&&(o.linesOfContext=11),void 0!==e&&e.exports&&n.module!==e?e.exports=o:"function"==typeof define&&define.amd?define("TraceKit",[],o):n.TraceKit=o}}("undefined"!=typeof window?window:global)},"./webpack-loaders/expose-loader/index.js?require!./shared/require-global.js":function(e,n,t){(function(n){e.exports=n.require=t("./shared/require-global.js")}).call(n,t("../../../lib/node_modules/webpack/buildin/global.js"))}});
Swing boarding is the activity where a skateboard deck is suspended from a pivot point above the rider which allows the rider to swing about that pivot point. The board swings in an arc which is a similar movement to riding a half pipe. The incorporation of a harness and frame allows the rider to perform turns spins all while flying though the air.
By the 1960s a small number of surfing manufacturers in Southern California such as Jack's, Kips', Hobie, Bing's and Makaha started building skateboards that resembled small surfboards, and assembled teams to promote their products. One of the earliest Skateboard exhibitions was sponsored by Makaha's founder, Larry Stevenson, in 1963 and held at the Pier Avenue Junior High School in Hermosa Beach, California.[12][13][14] Some of these same teams of skateboarders were also featured on a television show called "Surf's Up" in 1964, hosted by Stan Richards, that helped promote skateboarding as something new and fun to do.[15]
The average width of decks available in skateboards is eight inches, however; there are many different varieties available as well. A wider deck provides you better balance as compared to slimmer kinds but it does not allow you to perform skateboard tricks. Decks come in a variety of materials that include wood, fiberglass or carbon. Considering the price, plastic decks come cheaper, but if we will consider quality then other options though more expensive will prove worthwhile.
It’s long deck and premium bearings will give you the ease of pushing which will help you to tear out of around- town traveling. It has a unique shape of the perimeter which offers you 9.6 inches of leverage per turn. Can you imagine it? It also helps you to eliminate the wheel bite. This board has a maple covered deck that will certainly catch the attention of others. It is almost impossible that you cease to enjoy the splendor and elegance of this board. Furthermore, along with your stylish longboard, 245 mm axles are incorporated.
Toy Machine is an Ed Templeton company and one of the best skateboard companies of its time. Ed is an Orange County original skater and developed the board he wanted to skate on, thus creating the Toy Machine Brand. Though the Toy Machine team has seen many changes, it has always held onto professional skaters that can provide insight in the latest needs of boards. Toy Machine skateboards are known for their signature monster graphics, which have made them a top skateboard brand.

This board also has a unique shape that makes it a lot easier to ease into turns, which is something that longboards aren’t always known for. It’s a lot easier to push off on this deck thanks to how low it sits, and you also get a one-year warranty from the manufacturer should anything go wrong. If you’ve never ridden on a board before, and don’t want to learn tricks right away, this is a great choice, especially if you’ll be riding around a lot of mostly flat areas.

Let’s now move on to our top pick from the Punisher line, the Punisher Cherry Blossom Complete skateboard (31 inch). Hands down, the Punisher Cherry Blossom skateboard is the best skateboard for girls. And I am not just saying this because the cherry design would look best for girls, it has some incredible features and specifications. We love the 9-ply stiff maple deck with a beautiful cherry design. The deck is also covered with coarse grip tape which gives the skateboard excellent grip and it makes it a good ride for girls too.


Pro decks are what most people are familiar with and what is seen most commonly around skateparks and driveways around the US.  These decks can have a variety of different logos and images on them and sometimes are a specific professional skater’s pro deck.  Pro decks provide skaters a way to support their favorite riders and have the same equipment they see all their favorite pros using.  The quality of professional decks and parts are almost always very high as they have a reputable and brand image to uphold.  For this higher level of quality and you can expect to pay 2-3x the cost of a blank complete.  If you want to save some money and still have a pro look, there are options available that have generic blank parts with a pro deck.  This may be a good option for a beginner skater who is not yet doing complex tricks that may break these cheaper parts, but they still want the look and feel of a pro skateboard.  As the skater progresses they can then switch out these generic parts for higher-end options as necessary.
QuartetQuasiR.A.D.RandalRayneRealReality GripReflexRemind InsolesRicher PoorerRictaRIPNDIPRoger SkateboardsRogueRoyalRVCASabreSalt & StoneSanta CruzSanta Monica AirlinesSchmitt StixScramSector 9Shake JuntShortysSilverSK8MAFIASk8ologySkate MentalSkateknifeSkeleton Key MFGSkullcandySml.S-OneSourSOVRNSpitfireSquare UpStanceStateStereoTensorThank YouThe HundredsThe Killing FloorThe Quiet LifeTheoriesThrasherThunder TrucksTiredToy MachineTrafficTransworldTriple EightTurbokolorTwo Cents SkateboardsUnitVagrantVansVenomVentureVicious GriptapeVideoVisionVolcomWayward WheelsWelcomeWKNDZ FlexZero

Alien Workshop is a Dayton, Ohio based company, established by Chris Carter, Neil Blender and Mike Hill in 1990. They have gone through several ownership changes, including a period of being owned and operated by Burton Snowboards, but have persevered and become one of the top skateboard brands today. Alien Workshop has faced several turbulent challenges with varying outcomes, however they have remained dedicated to providing a high quality, yet also affordable boards. We like Alien Workshop for their innovative designs and conscience effort to make a great board, that many can afford. Their high quality boards has allowed them to become one of the best rated skateboard brands today.

Read on for our complete skateboard buyers guide where you can find things to consider when buying a beginner board, beginner skateboards for adults, ABEC ratings, Sizing Chart, and more about these epic extreme sports. Looking to go electric? Check our our review of the top electric skateboards! You could also try these top-rated electric longboards.


In the ever-volatile skateboarding industry, brands come and go, then come back again, only to go out once more, and eventually make room for the next person who is really in tune with what skateboarding is today. While no two brands can really be compared, the true signifier of their importance in skateboarding is how they can make a difference in the culture and bring something new to the table that hasn’t been done before. Every single brand on this list has been a part of something unique that has made us pay attention to them above all the others out there doing it in this saturated market.
Skateboarding during the 1990s became dominated by street skateboarding. Most boards are about 7 1⁄4 to 8 inches (180 to 200 mm) wide and 30 to 32 inches (760 to 810 mm) long. The wheels are made of an extremely hard polyurethane, with hardness (durometer) approximately 99A. The wheel sizes are relatively small so that the boards are lighter, and the wheels' inertia is overcome quicker, thus making tricks more manageable. Board styles have changed dramatically since the 1970s but have remained mostly alike since the mid-1990s. The contemporary shape of the skateboard is derived from the freestyle boards of the 1980s with a largely symmetrical shape and relatively narrow width. This form had become standard by the mid '90s.[42]
Skateboarding, as we know it, was probably born sometime in the late 1940s, or early 1950s,[citation needed] when surfers in California wanted something to do when the waves were flat. This was called "sidewalk surfing" – a new wave of surfing on the sidewalk as the sport of surfing became highly popular. No one knows who made the first board; it seems that several people came up with similar ideas at around the same time. The first manufactured skateboards were ordered by a Los Angeles, California surf shop, meant to be used by surfers in their downtime. The shop owner, Bill Richard, made a deal with the Chicago Roller Skate Company to produce sets of skate wheels, which they attached to square wooden boards. Accordingly, skateboarding was originally denoted "sidewalk surfing" and early skaters emulated surfing style and maneuvers, and performed barefoot.[6][9][11]
Remember the cool skate kids wearing Workshop tees in the '90s? Well you don't see too many of those these days, but AW is still one of the best “big” skate brands going. The team alone—featuring Supreme muse Jason Dill, tech-gnar wizard Anthony Van Engelen, and the most handsome guy on a board, Dylan Rieder—puts the brand in the top 10. And even though you might not associate legacy riders like Rob Dyrdek with anything cool at all, he pulled one of the most boss moves in all skate business history when he bought the brand that first sponsored him 20 years ago back from Burton (who bought the brand from Chris Carter in 2008) last year, so Workshop is once again skater-owned.
A magazine?! This is an outrage! Yeah, it is. But Low Card has become the defacto hat brand for all the cool hesh skaters in America, so deal with it. Also, the mag's graphic tees, baseball shirts, coaches jackets, and beanies are all highly dope. The custom mesh hat program is the way to go if you feel the need to wear your “yeah, I skate” calling card on your head.
As Palace’s reputation began to grow, the brand added more riders, including ex-Stereo Skateboards pro Benny Fairfax, ex-Blueprint Skateboards pros Danny Brady and Chewy Cannon and Southbank mainstays Karim Bakhtaoui and Blondey McCoy. From the outset, Palace’s approach was to mix a core skate team with a heavy emphasis on soft goods which almost immediately propelled their appeal way beyond the confines of the skateboard market and expedited their growth into one of the biggest names in the street wear arena.

The promo was followed in late 2012 by another Polar Skate Co. Promo – No complies & wallrides & shuvits again filmed in and around Malmo, Sweden as well as Copenhagen, Denmark, New York and London, featuring skaters who appeared in the original promo, plus new addition and former Uk-born Blueprint skater Jerome Campbell and New York based Aaron Herrington who would go on to turn pro for Polar.
The magical thing about Supreme is that—despite what some may think—it actually caters to everyone. While they may not go out of their way to make you feel welcome, at its core, the brand is a legendary downtown skate institution, and there is no singular sensibility you can pin on Supreme. It's hip-hop and punk, menswear and streetwear. The unifying aspect is deep roots in skate, music, and art. Beyond that, anything goes.
The concave of a skateboard deck is how curved the width of the deck is.  Very few skateboard decks have no concavity and are completely flat as then they would break very easily and be hard to do flip tricks on.  Steep concave decks are the most study and best to do flip tricks on because the slope of the deck catches the skater’s toe or heel more easily and flips the board faster than a shallower deck.  Shallow concave boards are better for cruising around and vert skating as they are more comfortable on your feet and more controllable.  In practice, these recommendations are pretty general and it ultimately comes down to personal preference on the the best deck concavity.  But if you have no idea, following the recommendations or picking a board with moderate concavity is a good place to start.
Let’s now move on to our top pick from the Punisher line, the Punisher Cherry Blossom Complete skateboard (31 inch). Hands down, the Punisher Cherry Blossom skateboard is the best skateboard for girls. And I am not just saying this because the cherry design would look best for girls, it has some incredible features and specifications. We love the 9-ply stiff maple deck with a beautiful cherry design. The deck is also covered with coarse grip tape which gives the skateboard excellent grip and it makes it a good ride for girls too.
Graphically speaking, Welcome is very distinctive, with an emphasis on hand drawn imagery and references to esoteric and occult themes mixed with bright colourways. Welcome Skateboards also offer a detailed shape guide on their website, detailing the exact dimensions of all of their 38 custom shapes, which again differentiates their product from many of the skateboard brands on the market.
There is one question that one or another might have had in mind before: What is the best skateboard deck brand? Unfortunately, we don’t have a satisfying answer. But we did our very best and moved mountains by coming up with a very complex formula that takes sold decks, brand shop visits, search queries and lots of other fripperies into consideration to display a list of your favourite skateboard brands of 2017.

SkatesZone.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, SkatesZone.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.
The Krown Rookie Skateboard Complete 7.5 comes with thick, sturdy 7-ply maple wood deck. It gives you more control and permits you to perform various tricks. It features carbon steel ABEC-3 bearings, aluminum trucks, bushings and 54mm x 34mm wheels. This board is perfect for kids who are 8 years and older. It has a maximum weight capacity of up to 220 lbs.
The skateboards on this list will all suit one type of person or another, but they all have drawbacks that keep them from being true pro boards. The best skateboards is the one that requires the fewest upgrades to be great. Replacing skateboard parts is just part of the game, as street skating is destructive by its very nature, but it should take a while.
The board itself is actually very portable in the sense that it only weighs a modest four pounds. Which means you can jump on and off in any situation that may warrant you to walk or ride. The ABEC7 bearings are top quality bearings and of the highest class. Also accompanying all of these fine features comes the kick-tail end of the board. This is to ensure that maneuvering and tricks can be performed with this utmost of ease.

One of the earliest sponsored skateboarders, Patti McGee, was paid by Hobie and Vita Pak to travel around the country to do skateboarding exhibitions and to demonstrate skateboarding safety tips. McGee made the cover of Life magazine[21] in 1965 and was featured on several popular television programs—The Mike Douglas Show, What's My Line? and The Tonight Show Starring Johnny Carson—which helped make skateboarding even more popular at the time.[22][23][24] Some other well known surfer-style skateboarders of the time were Danny Bearer, Torger Johnson, Bruce Logan, Bill and Mark Richards, Woody Woodward, & Jim Fitzpatrick.
Positiv decks are usually maple, but some are hard birch. They are made using the same laminating process and glue that Powell Peralta boards use. These decks have Positiv’s super slide treatment (SST), which is essentially a plastic lining that makes the board slide more easily. The stuff works, and wax becomes less necessary for slides with these boards.
Ancheer 31″ Pro Skateboards are made of 7-ply maple wood and finished with anti-slip grip tape.  It includes 60mm PU wheels ideal for riders who want to carve out sections, obtain speed and higher off the ground for tricks. It features 6″ Tony Hawk Signature aluminum trucks and 32″ long deck with double kick tail which is ideal for perfecting your favorite tricks.  It comes with ABEC-7 skateboard bearings.  It has style and quality which is expected from the most influential skateboarders of all time.  It is one of the best-rated skateboards on Amazon with a rating of 4.8.
It comes with a plastic board deck, which is small in size, making it ideal for riders who need a really sturdy skateboard. It is more suitable for both experts and beginners who want to learn new tricks in skateboarding. The fact that it is stable and small makes it good for kids, too. It promotes ease in riding and controlling it in a crowded street. This complete skateboard is lightweight, too, allowing you to carry it almost everywhere.
With the evolution of skateparks and ramp skating, the skateboard began to change. Early skate tricks had consisted mainly of two-dimensional freestyle manoeuvres like riding on only two wheels ("wheelie" or "manual"), spinning only on the back wheels (a "pivot"), high jumping over a bar and landing on the board again, also known as a "hippie jump", long jumping from one board to another, (often over small barrels or fearless teenagers), or slalom. Another popular trick was the Bertlemann slide, named after Larry Bertelemann's surfing manoeuvres.
Originally referred to as sidewalk surfing, the birth of skateboarding dates back to the early 1940s and the use of wooden boxes with roller skates attached to their bottoms. While the board itself cannot necessarily be attributed to a single inventor of the time and was, instead, a spontaneous invention from multiple sources, the modern style of many of today's skateboards took form during the 1950s when California surfers were looking for a physical activity to keep them busy during times when the waves were flat. The first manufactured skateboards were ordered by a Los Angeles surf shop and were designed to be used by surf enthusiasts during their downtime. At the time, the shop owner set up an arrangement with the Chicago Roller Skate Company to produce sets of skate wheels, which the shop would then attach to square wooden boards.

Grind King skateboard trucks are the best trucks available for grinding. The truck hangar is made from aluminum, making it softer and weaker, but better for grinding. This means you will have to replace them faster if you grind, but your grinds will be smoother and better. Grind King trucks do use special hex-head kingpins, so you will need a special tool to adjust them.
OneHype Designer Board has its own one of a kind design which is placed through a heat transfer and not a sticker. It measures 8″ W x 31″ L. It’s ready to use. It includes shock pads, durable wheels, smooth bearings, colored bushings, and aluminum trucks. The 7 ply maple deck is tough and can handle several impacts. This board is suitable for all ages.

Goldfish and Mouse established Girl’s video aesthetic with numerous movie skits inter-cut with the skating, including the infamous Eric Koston as Charlie Chaplin skit. Pioneering skate photographer and film-maker Spike Jonze (also responsible for Blind Skateboard’s Video Days) as a part-owner of Crailtap has been involved in the making of all of their videos to date and it is his cinematic approach that lends Girl’s video output its uniqueness.
×