If you want to do cruising and street style on the same board then you probably want a large board and larger wheels, as many have already commented. I think that an 8 inch board with at least 56 mm wheels will be best. I think that you should find a local shop to support and to talk to about gear. I would advise getting a shop deck, with Independent trucks (at the correct width for your board, which is one detail that a local shop should be able to help with) Bones street tech formula wheels (I like profiles 1 and, I think 5), and Bones Reds bearings (not super reds, super reds are not super).
If what you want out of your first skateboard is something very stable to just get the feel of riding without the danger, the Atom Drop Deck is perfect. This is a longboard, meaning it’s perfect for longer rides and cruising around. The components are made to handle lots of wear and tear, and the low-ride deck makes you feel more in control, closer to the ground, and more stable.
The board itself is actually very portable in the sense that it only weighs a modest four pounds. Which means you can jump on and off in any situation that may warrant you to walk or ride. The ABEC7 bearings are top quality bearings and of the highest class. Also accompanying all of these fine features comes the kick-tail end of the board. This is to ensure that maneuvering and tricks can be performed with this utmost of ease.
Jessup is considered to be the standard grip tape, and it is the grip we offer for free with all decks. MOB is known for their coarser grip, which gives excellent traction, but also wears down your shoes faster. MOB M-80, Grizzly and Shake Junt grip tapes fall somewhere in the middle, offering good overall traction without the heavy abrasion. There are other extra course grip options for downhill skateboarding (Vicious, Blood Orange, etc.). That stuff locks your foot in place but it is so coarse it would quickly destroy your shoes if you tried flip tricks with it.
Omar Salazar suffered a bad knee injury recently and was sidelined from skating, allowing him to refocus his energy into running his company, Doomsayers. Following the demise of Alien Workshop and facing an uncertain future in the industry, Omar decided to really focus on a brand whose image is not shy about its disdain for corporate greed, which many people blame for the demise of his long time sponsor.
Alien Workshop is a Dayton, Ohio based company, established by Chris Carter, Neil Blender and Mike Hill in 1990. They have gone through several ownership changes, including a period of being owned and operated by Burton Snowboards, but have persevered and become one of the top skateboard brands today. Alien Workshop has faced several turbulent challenges with varying outcomes, however they have remained dedicated to providing a high quality, yet also affordable boards. We like Alien Workshop for their innovative designs and conscience effort to make a great board, that many can afford. Their high quality boards has allowed them to become one of the best rated skateboard brands today.
What’s important to consider here is choosing the length based on your riding needs. You might be a street rider and love to do some tricks. You probably need a short board with a narrow profile. Whereas the longboard is only recommended if you are a professional skateboarded and love to cruise around the town and want to improve your balance and stability.
There are three types of skateboards: classic, retro, and snake. Classic boards are the most common and what you generally find when you go shopping. Retro boards are longer and have larger wheels. They are great for skating long distances but inferior to classic boards for doing tricks. A snake board is not appropriate for kids since it requires intensive balance and has only one wheel.
Manufacturers started to experiment with more exotic composites and metals, like fiberglass and aluminium, but the common skateboards were made of maple plywood. The skateboarders took advantage of the improved handling of their skateboards and started inventing new tricks. Skateboarders, most notably Ty Page, Bruce Logan, Bobby Piercy, Kevin Reed, and the Z-Boys started to skate the vertical walls of swimming pools that were left empty in the 1976 California drought. This started the "vert" trend in skateboarding. With increased control, vert skaters could skate faster and perform more dangerous tricks, such as slash grinds and frontside/backside airs. This caused liability concerns and increased insurance costs to skatepark owners, and the development (first by Norcon, then more successfully by Rector) of improved knee pads that had a hard sliding cap and strong strapping proved to be too-little-too-late. During this era, the "freestyle" movement in skateboarding began to splinter off and develop into a much more specialized discipline, characterized by the development of a wide assortment of flat-ground tricks.
In 2015, Hockey was announced to the world as Fucking Awesome’s sister brand with the release of their first eponymous video clip ‘Hockey‘ featuring riders John Fitzgerald and Donovon Piscopo. Since that first release Hockey have added former Anti Hero rider Andrew Allen to their team, along with Ben Kadow, a move announced in their second video – Hockey II.
There’s a bit of self-induced CONFUSION with Kryptonics inc. When they first came out, they made, literally, a Revolutionary Wheel, one that BOUNCED. That resilience made them VERY Fast on rougher surfaces, and perhaps even stickier (for a given hardness) than other wheels. You can buy that type of wheel (as a ‘Re-Issue’ “C-Series” in 55,60,65,70+75 mm sizes) now, and it’s STILL HIGH QUALITY, FAST, + STICKY! Even by today’s ‘longboard Race’ criteria, these are wheels to be reckoned with.
This board also has a unique shape that makes it a lot easier to ease into turns, which is something that longboards aren’t always known for. It’s a lot easier to push off on this deck thanks to how low it sits, and you also get a one-year warranty from the manufacturer should anything go wrong. If you’ve never ridden on a board before, and don’t want to learn tricks right away, this is a great choice, especially if you’ll be riding around a lot of mostly flat areas.
Read on for our complete skateboard buyers guide where you can find things to consider when buying a beginner board, beginner skateboards for adults, ABEC ratings, Sizing Chart, and more about these epic extreme sports. Looking to go electric? Check our our review of the top electric skateboards! You could also try these top-rated electric longboards.
Without good grip tape, skaters have a tough time staying on top of their board. The main complaints about poor grip tape tend to be that it was never very grippy or lost its grip really quickly. Once again, we recommend trusting in name brands with years of experience supporting skateboarders. Unfortunately, if you are buying a pre-made complete skateboard, you probably won't have access to the brand name of the grip.
While they might not be so well known as an apparel company as so many other brands on this list, Sk8mafia stays winning with skateboarding’s core base. Their most prominent pro, Wes Kremer, was named Thrasher’s Skater of the Year for 2014, and they continue to drop a monthly edit featuring their whole crew through Ride Channel. The Mafia keeps the streets fed.
“I think it’s just also like, people want to have fun. If you watch say those types of Street League type of skateboarders, who are super amazing skateboarders that can push these crazy tricks down rails and stairs, like switch tre down fifteen stairs or whatever trick they do — it’s amazing to see that level of skating, but if you are an average Joe living in a small town you’re just like, “I’m never going to be able to kickflip back noseblunt twenty-stair rails”. That’s always the biggest trick. If you ask me it’s like, “What videos do you really enjoy?” The videos that you can some how relate to. Like, “Hey, I could actually do some of these tricks.” You connect to it and you feel like you can picture yourself being a part of the whole thing. When people put out these amazing super stunt skateboarding videos, pushing it to the furthest level possible, that’s rad in one sense, but to me personally as a kid I could never in my wildest dreams believe that I could do that too. I respect it. I understand it. But does it make me want to go skate? No.”
Proper skateboard wheels are made out of polyurethane with minimal additives. Toy skateboard wheels can be made of plastic or a low quality poly mix which leads to poor performance in the best case and even outright dangerous situations with cracked wheels in the worst case. This is a case where brand recognition and reputation can come into play.