A precursor to the extreme sport of street luge, that was sanctioned by the United States Skateboarding Association (USSA), also took place during the 1970s in Signal Hill, California. The competition was called "The Signal Hill Skateboarding Speed Run", with several competitors earning entries into the Guinness Book of World Records, at the time clocking speeds of over 50 mph on a skateboard. Due to technology and safety concerns at the time, when many competitors crashed during their runs, the sport did not gain popularity or support during this time.[36][37]
Similar to sandpaper, grip tape, or “grip” as it’s commonly referred to, is applied to the top of your deck for traction. Grip gives you the friction you need to perform tricks such as ollies and kickflips. Not all grip tape is the same however. Each brand's products perform differently, so you may want to experiment with different brands to get a feel for what you prefer.
You seem to love Toy Machine deep in your heart! Ed Tempelton’s brand did well this year and landed four places above last year’s ranking. In addition to many other exhilarating designs, the Turtles deck series was the most acclaimed one. The quality is proven by team riders such as Leo Romero, Collin Provost, Daniel Lutheran and Co. You can get your Toy Machine deck from 59.99 € | 50.00 GBP!
Krux make some great trucks. Krux makes "downlows" trucks, that have a lower hanger and kingpin than even Grind King. However, you will need a hex tool to adjust them. The Krux IIIs with Topless System are even lighter, with special bushings that feel broken in from the start, but that also provide a faster snap back into position. Krux trucks are light and low.
We would also like to point out one amazing detail about Plan B that makes it stand out from the other top skateboard brands, the deck technology that it uses. I already talked about how their decks are pretty strong and have minimal flex. But its other products like Plan B BLK ICE decks with wax used on their standard build decks to increase the speed and smoothness of skating a rail and the Flashback Series that uses prospect skateboard deck technology to make the boards thinner, lighter and stronger, are amazing!
Here's a list of the best skateboard truck brands (read about Trucks in the Skateboard Dictionary). Trucks can be expensive, and picking out the right set of skate trucks can seem tough. But, if you get a pair of trucks off of this list, you should be good. There are other brands that are good quality too, but each of these brands has something that helps it to really stand out. These aren't put in any particular order.
Let me tell you this, Santa Cruz has a huge variety of high quality everything-skateboard so naturally picking out the best skateboard of the best was a hard task. But as usual, we have a clear winner; the Santa Cruz Youth Land Shark Cruzer, Rasta. If you are a part of the skateboarding community, there is a high chance that you might have heard about this skateboard. Intricately crafted with the best quality materials, it is one of the best skateboards in town.
We have unfortunately seen low quality skateboards that even try to use plastic trucks (please avoid). However it can be really hard to spot a poorly made metal truck without skating it. Brand awareness can come into play here again. The manufacturers name should be marked on the trucks. A quality set of trucks (2 per board) could start out as low as around $30 and will go up from there. 
The smaller the wheel diameter, the easier it is to do tricks, because it makes the board sit closer to the ground. But beginners will definitely have an easier time controlling a board with larger diameter wheels. Think of the larger wheels as being akin to training wheels. If you don’t want your board to have “pop” as you are learning, you can choose softer wheels, all the way down to a 73a. They won’t let you go as fast, and you’ll have to push off more often, but they do make it more likely that your board will stay on the ground.
Somehow, in the great effort to fight societal conformity, skateboarding always manages to create its own conformity. Trends in styles of skating and fashion come and go. A brand gets hot for a year or two because it's on trend, then it fades to make way for the next thing. Welcome Skateboards doesn't give a fuck about all that. Yes, they are a little weird. The graphics are vaguely Illuminati, and they can't seem to make a normal shaped deck, but that's just Welcome doing its own thing, and who wouldn't welcome that?

By 2001 skateboarding had gained so much popularity that more people under the age of 18 rode skateboards (10.6 million) than played baseball (8.2 million), although traditional organized team sports still dominated youth programs overall.[43] Skateboarding and skateparks began to be viewed and used in a variety of new ways to complement academic lessons in schools, including new non-traditional physical education skateboarding programs, like Skatepass[44] and Skateistan,[45] to encourage youth to have better attendance, self-discipline and confidence.[46][47][48] This was also based on the healthy physical opportunities skateboarding was understood to bring participants for muscle & bone strengthening and balance, as well as the positive impacts it can have on youth in teaching them mutual respect, social networking, artistic expression and an appreciation of the environment.[49][50][51][52]
Goldfish and Mouse established Girl’s video aesthetic with numerous movie skits inter-cut with the skating, including the infamous Eric Koston as Charlie Chaplin skit. Pioneering skate photographer and film-maker Spike Jonze (also responsible for Blind Skateboard’s Video Days) as a part-owner of Crailtap has been involved in the making of all of their videos to date and it is his cinematic approach that lends Girl’s video output its uniqueness.
Toy Machine is an Ed Templeton company and one of the best skateboard companies of its time. Ed is an Orange County original skater and developed the board he wanted to skate on, thus creating the Toy Machine Brand. Though the Toy Machine team has seen many changes, it has always held onto professional skaters that can provide insight in the latest needs of boards. Toy Machine skateboards are known for their signature monster graphics, which have made them a top skateboard brand.

Its All Powell-Peralta Ligament decks feature a wider and more robust polymeric strap. The ligament strap is so powerful that in case your board breaks, the ligament strap will hold your deck together to allow you to ride out of it. Ligament decks are same in weight as a 7-ply maple deck but provide more pop and stiffness that lasts longer than ordinary boards.
The hoopla team helped to publicize just how well women can skate, and helped to create an onramp to skating's main road. Young girls and women have taken this opportunity so seriously, that they are no longer content to be part of a separate but equal skate community. In this era of the "Me Too" movement, shattered glass ceilings, and equality of pay, women have chosen to participate on each major company’s skateboard team, instead of supporting brands like hoopla, created just for women.
Skateboards can be bought online and in your local stores.  However, choosing a good skateboard can be challenging.  If you are a beginner there are a lot of things that you have to consider.  Aside from the cost, you should also check the entire board such as the wheels, the deck, the trucks, and others.  Here, we have compiled the best skateboards for sale that you can choose from right now.
Pro decks are what most people are familiar with and what is seen most commonly around skateparks and driveways around the US.  These decks can have a variety of different logos and images on them and sometimes are a specific professional skater’s pro deck.  Pro decks provide skaters a way to support their favorite riders and have the same equipment they see all their favorite pros using.  The quality of professional decks and parts are almost always very high as they have a reputable and brand image to uphold.  For this higher level of quality and you can expect to pay 2-3x the cost of a blank complete.  If you want to save some money and still have a pro look, there are options available that have generic blank parts with a pro deck.  This may be a good option for a beginner skater who is not yet doing complex tricks that may break these cheaper parts, but they still want the look and feel of a pro skateboard.  As the skater progresses they can then switch out these generic parts for higher-end options as necessary.
However, the diversity of Santa Cruz skateboard’s stake in the skateboard business meant that they easily survived the mid-90’s slump in popularity and returned with an newly invigorated team and powered on with video after video from the mid-90’s to the present day. Similarly to Powell-Peralta, Santa Cruz are also notable for their Veteran Division (documented in their 2007 release ‘V Day‘) celebrating pro riders such as Keith Meek, Tom Knox and Eric Dressen from earlier eras of Santa Cruz’s existence. Santa Cruz Skateboards current line of product boasts many re-released classic boards from earlier eras of the brand and are as popular, if not more so, than they were originally, thanks to an explosion in the nostalgia and collector’s markets within skateboarding.
In 2015, Hockey was announced to the world as Fucking Awesome’s sister brand with the release of their first eponymous video clip ‘Hockey‘ featuring riders John Fitzgerald and Donovon Piscopo. Since that first release Hockey have added former Anti Hero rider Andrew Allen to their team, along with Ben Kadow, a move announced in their second video – Hockey II.

Severe injuries are relatively rare.[103] Commonly, a skateboarder who falls suffers from scrapes, cuts, bruises, and sprains.[103] Among injuries reported to a hospital, about half involve broken bones, usually the long bones in the leg or arm.[102] One-third of skateboarders with reported injuries are very new to the sport, having started skating within one week of the injury.[102] Although less common, involving 3.5–9 percent of reported injuries, traumatic head injuries and death are possible severe outcomes.[102]

If you're in the market for a skateboard for your child, there are some general points to keep in mind: A complete skateboard is one that comes fully built, size doesn't matter, and as with all things you buy, you get what you pay for. Conventional wisdom says to go with a good-quality board that will last longer and is safer. Here are some good choices to check out.


Just like our previous skateboard, also produced by Punisher, the Elphantasm looks just as attractive as its sister model, the Butterfly Jive. Both have very outgoing designs that can fit the style of skating for many riders nowadays. The highly artistic image of this skateboard is, as Punisher states, one of its main attractive features. Combining the high-quality design with the quality craftsmanship of the Candian Maple deck has been one of Punisher’s better choices. It makes this board one of the most durable skateboards out there.
(2) Goldchain, Michelle (July 31, 2018). "Why is Pennsylvania Avenue's Freedom Plaza such a failure?". Greater Greater Washington. Retrieved October 30, 2018. One group of people do use Freedom Plaza regularly: skateboarders. The open hardscape and railings of Freedom Plaza make an excellent and popular skate park, though skating there is not actually allowed and Park Police regularly chase skaters from the park.

A skateboard consists of a deck, trucks, wheels, bearings, hardware, and griptape. All parts come in a variety of sizes, graphics, colors, and signature pro series. The deck is the essential part of any skateboard. The deck ranges generally from 7.5" to 8.5". Skaters choose their board size for many reasons, but the basic deciding factor comes down to style of skating and foot size. Transition skaters usually ride a wider deck, while street skaters tend to go with a smaller deck. Skate brands such as Girl, enjoi, and Welcome offer a wide range of boards in regards to sizes and graphics. Skateboard trucks come in either a high or low setting, and also in a range of widths. The main factors in a truck, are how well they turn, and how well they grind. Independent, Venture, and Thunder, are truck brands that are well known for their turning and grinding capabilities. The skate hardware is generally either Phillips head or Allen key bolts. The skateboard wheels range from 50mm to 60mm. Some brands offer smaller and larger sizes, but 50-60mm is the general range. Like the deck sizes, wheel sizes depend on the skater's choice of terrain: Transition skaters tend to ride bigger wheels, while street skaters usually go with smaller wheels. Bones, Spitfire, Ricta, and Wayward wheel companies all make wheels for any terrain, whether you're a street shredder or a park burner. Skate bearings follow the ABEC rating system, which includes grades 1, 3, 5, 7, and 9. Bones, Bronson, and Andale are some of the top bearing brands in the skate market. CCS proudly carries all these brands, and many more.

When you’re at the skate park or in a freestyle environment at a parking lot or structure, you want to have the most stability possible. You wouldn’t want your trucks cracking or a ball bearing spewing out during the landing of a nice front style 360 flip. If you’re in school, then choosing a skateboard brand for college while you’re away will be extremely easy given that this board is so very cheap and durable.


Before Zoo York, Supreme, and 5Boro, New York had SHUT. For a short while, SHUT ruled, but soon the business fell out and founder Rodney Smith left to start Zoo York with Eli Morgan Gesner (who drew the original SHUT logo), and Adam Schatz. SHUT went dormant while the three men grew Zoo York into a successful business, and when they sold it off to Ecko in 2006, SHUT was reborn. The brand's flagship store resides on New York City's Lower East Side, so you can go witness skateboard history in person any time you want.
As the oldest brand on this list, Santa Cruz rightly holds the distinction of being the oldest skateboard brand in the industry and thus, the brand which effectively created the modern skateboard brand as we know it today. Founded as part of NHS Inc. a Santa Cruz based skateboard distribution company over 40 year ago, Santa Cruz as a brand has played a large part in every era of skateboarding history since its inception.
It is mainly because those items are guaranteed to help you familiarize yourself with the ins and outs of using them. They are a big help in making you feel comfortable when you push off with your feet while also balancing on top of the board when riding. It is not good to go for a very technical product, so it’s best to choose the mentioned types first.

Fox and Deacon re-branded Deathbox in 1991 as Flip skateboards and announced the four man team as consisting of Geoff Rowley, Rune Glifberg, Andy Scott and Tom Penny. After nearly being put out of business when a flood destroyed much of their stock, Fox, Deacon and the four team riders began to plan their move from the UK to Huntington Beach, California in order for the brand to grow further.
×