The core of the skateboard trucks is extremely lightweight, compared to the other skateboards we listed. They still sport a heavy-duty aluminum, but their initial design helps the skateboard be lighter and easier to pivot. It also arrives un-assembled which allows for the adult or child to have a sense of accomplishment when they put the board together. You will also be able to customize it to your heart’s content!
The Powell Golden Dragon 2 Skateboard is an affordable and complete skateboard for the beginners and also for the advanced skaters. It has high-rebound, hand-cast polyurethane wheels to give you a great roll and grip. It measures 7.5 inches wide with a colorful screen-printed bottom. It is made in China and has an average rating of 4.2 on Amazon.
Originally referred to as sidewalk surfing, the birth of skateboarding dates back to the early 1940s and the use of wooden boxes with roller skates attached to their bottoms. While the board itself cannot necessarily be attributed to a single inventor of the time and was, instead, a spontaneous invention from multiple sources, the modern style of many of today's skateboards took form during the 1950s when California surfers were looking for a physical activity to keep them busy during times when the waves were flat. The first manufactured skateboards were ordered by a Los Angeles surf shop and were designed to be used by surf enthusiasts during their downtime. At the time, the shop owner set up an arrangement with the Chicago Roller Skate Company to produce sets of skate wheels, which the shop would then attach to square wooden boards.
Many jurisdictions require skateboarders to wear bicycle helmets to reduce the risk of head injuries and death. Other protective gear, such as wrist guards, also reduce injury. Some medical researchers have proposed restricting skateboarding to designated, specially designed areas, to reduce the number and severity of injuries, and to eliminate injuries caused by motor vehicles or to other pedestrians.
We have unfortunately seen low quality skateboards that even try to use plastic trucks (please avoid). However it can be really hard to spot a poorly made metal truck without skating it. Brand awareness can come into play here again. The manufacturers name should be marked on the trucks. A quality set of trucks (2 per board) could start out as low as around $30 and will go up from there.
It's really hard to continue with a small girls’ board brand when so many companies are now interested in the women's market. We feel like it's the right time to close down the brand and move on to the next chapter. Thanks to George and Juli Powell as well as Michael Furukawa for their vision and support of the brand and our mission over the last decade. Thanks to those who bought our products, our team riders, media, and to those that believed in what we were doing from the very beginning. I also want to thank Mimi Knoop who wore multiple hats over the years and was responsible for making hoopla a brand that was respected, legitimate, and one that we were proud to be a part of.
After leaving long time sponsor Birdhouse due to a feeling of dissatisfaction at the manner in which he himself was being marketed as a pro skater, Andrew Reynolds joined forces with a group of similarly aged pro skaters, who at the time, all lived close to each other in Huntington Beach, California in the Warner Ave housing complex and resolved to turn what had formerly been a loosely affiliated crew into a skateboard brand. Reynolds approached Tony Hawk and Per Welinder, owners of Blitz Distribution (and distributors of Birdhouse) with his idea and, rather than losing Reynolds completely, Blitz Distribution agreed to assist Reynolds with Baker and to distribute it.
These boards are perfect! perfect shape (for me anyways) medium concave (which is better than deep or mellow in my opinion) perfect shape of the tail and nose, and have perfect pop (which last FOREVER) they're very durable too. Everything is perfect but why they're ranked so low is because not many people get deluxe boards than come here to write about how awesome they are.
Unlike California, where the sun always shines and the pavement has never seen snow and salt, New York only has a handful of skate brands. Funny when you think about the rich history skateboarding has in the City. 5Boro is one of the brands that has been keeping the tradition alive for more than a decade, and next time you see founder Steve Rodriguez out skating, thank him for making so much happen for skaters in NYC.
Top Ten Worst Companies In the U.S.Best Skateboarding BrandsBest BMX Bike BrandsmcarzwashereBest Scooter BrandsBest Brands of Mountain BikesBest Lego ThemesTop 10 Best Assault RiflesRotorheadTop 10 Best Nerf GunsTop 10 Things to Buy with $100Best Knife CompaniesTop Ten Best Cigarette BrandspreachinpreachTop 10 Most Needed Survival SuppliesTop Ten Electronics BrandsMatrixGuyTop 10 Best Airlinescarvandog
As the oldest brand on this list, Santa Cruz rightly holds the distinction of being the oldest skateboard brand in the industry and thus, the brand which effectively created the modern skateboard brand as we know it today. Founded as part of NHS Inc. a Santa Cruz based skateboard distribution company over 40 year ago, Santa Cruz as a brand has played a large part in every era of skateboarding history since its inception.
Girl’s next full-length video came in 2003 with the release of ‘Yeah Right‘ which introduced a crew of younger Girl riders including Paul Rodriguez and Jereme Rogers, along with announcing videographer Ty Evans addition to the Crailtap family. From 2002 onwards, Ty Evans had been the main driving force behind Crailtap’s video output as Spike Jonze’s Hollywood directorial career took off.
Ever notice small vertical or horizontal cracks through your grip tape or by the hardware of your trucks? These are called stress or pressure cracks and are basically mini fractures of your skateboard deck that typically are seen in the areas of the deck that withstand the greatest impact (around the trucks). A few pressure cracks is generally no big deal and you won’t even notice them while skating, but they can compound and grow larger and make your deck lose “pop” and increase the chance of snapping. To avoid pressure cracks, you cant use riser pads underneath your trucks to reduce the level of impact your deck takes. You should also avoid over tightening your hardware and storing your skateboard in a very humid place as both of these practices can also make your board weaker and more susceptible to pressure cracks.
Rarely you make notice your deck to lose concavity or flatten over time. Although this isn’t very common, it’s typically due to water damage and is a sign of many other problems. Wooden decks are not meant to get wet and they will warp, crack, and break if they get soaked. It’s pretty simple and straightforward to avoid this problem. Keep your skateboard in a dry place, and don’t skate in the rain or through puddles. Skating through water will also destroy your bearings, if deck warping and breaking wasn’t a good enough reason for you to not do it.
Hi Everyone! My name is Pete (yes, I’m a real person who lives in a cornfield just outside of Buffalo, NY – well, my house is in the middle of a cornfield!). As a former collegiate athlete in Iowa, I’ve played varsity basketball, volleyball and soccer. I also happen to be an outdoor adventure fanatic who’ll do whatever it takes to never miss my annual week-long wilderness canoe trip in the Northern Ontario wilderness. Sports equipment has come a long way over just the past few years, and I’d love to share with you the latest (and most competitively priced) products that will save you many of the frustrations I’ve dealt with over the years! Please feel free to cruise the site and drop me a line on the contact page if you have ideas for improvements or anything else!
Graphically speaking, Welcome is very distinctive, with an emphasis on hand drawn imagery and references to esoteric and occult themes mixed with bright colourways. Welcome Skateboards also offer a detailed shape guide on their website, detailing the exact dimensions of all of their 38 custom shapes, which again differentiates their product from many of the skateboard brands on the market.
Now let us have a look at the features of the Powell Golden Dragon Flying Dragon which make it such an amazing buy. Firstly, it is affordable and works great for both, skateboard beginners and intermediate riders. We love its high rebound wheels; the hand-cast polyurethane wheels roll perfectly and have a good grip too. We also love how the aesthetically pleasing graphics bottom is paired with a top that measures 7.625 inches in width and 31.625 inches in length. The board has easy control and glides smoothly. And guess what? You get all of this at an amazing price.
^ Jump up to: a b Rosenberger, Robert (June 19, 2014). "How Cities Use Design to Drive Homeless People Away: Saying "you're not welcome here"—with spikes". The Atlantic. The Atlantic Monthly Group. Archived from the original on July 1, 2014. Retrieved April 23, 2017. An example of an everyday technology that’s used to forbid certain activities is “skateboard deterrents,” that is, those little studs added to handrails and ledges. These devices, sometimes also called “skatestoppers” or “pig ears,” prevent skateboarders from performing sliding—or “grinding”—tricks across horizontal edges. A small skateboard deterrence industry has developed, with vendors with names like “stopagrind.com” and “grindtoahault.com.”
The Element Quadrant #14 board is 8-inches wide and 31.75-inches long, from nose to tail. This deck features a bare top that needs grip tape and a design on the bottom with four quadrants featuring the Element symbol in alternating red and black backgrounds. The wheelbase between the trucks is just over 14 inches while the nose is 7 inches and the tail is 6.325.
Polar’s inaugural video release, The Polar Skate Co. Promo – Wallride Oh Yeah Oh Yeah Oh Yeah (2012) with the tagline ‘Inspire others to inspire themselves’ featuring Pontus, fellow Swedes Oskar Rozenberg and Davd Stenstrom, Polish rider Michal Juras, Dane Hjalte Halberg, Tjark Thielker and original rider and Polar artistic contributor Jakke Ovgren.
Silver has edged it's way onto the scene offering nice, quality skateboard trucks, with plenty of little extras to make their trucks stand out from the rest. With things like inverted kingpins and axle caps, Silver trucks are pushing their motto, "Strength with Style." Silver trucks do look nice! Silver also sports a great team, with guys like Sheckler, Dyrdek, Rodriquez and more.
By the 1960s a small number of surfing manufacturers in Southern California such as Jack's, Kips', Hobie, Bing's and Makaha started building skateboards that resembled small surfboards, and assembled teams to promote their products. One of the earliest Skateboard exhibitions was sponsored by Makaha's founder, Larry Stevenson, in 1963 and held at the Pier Avenue Junior High School in Hermosa Beach, California. Some of these same teams of skateboarders were also featured on a television show called "Surf's Up" in 1964, hosted by Stan Richards, that helped promote skateboarding as something new and fun to do.
“As far as the actual look of the vast majority of contemporary graphics goes, I’d say that it feels to me as if something has been lost. It’s down to what you can do with modern heat transfer printing techniques – you can literally just take a photograph from the Internet and print it identically straight onto a skateboard. Speaking personally, there’s very little to challenge you there: either from the point of view of creating graphics, or from the consumer’s perspective. Whereas back when screen-printing was the norm, every time a graphic was produced the artist was physically cutting the key line out by hand. The key line is the final black line that forms the outline of whatever it is that you’re printing and ties in all the other colours together. You can see this in the early Sean Cliver graphics for example, where it’s clear that he has hand cut the key lines as precisely as he was able to, but looked at from today’s perspective they’re not perfectly precise, which is what gives Cliver’s earliest stuff its specific look in my opinion.”
Longboards are often 8 to 12 inches longer than a standard skateboard. That added length makes them more stable for long rides or high speed downhill runs. Available in a huge variety of shapes, sizes, and truck mounting options, longboards are highly customizable for many types of riding. If you want to push long distances, skate fast down hills, or are a beginner looking for an easy board for learning to balance, check our Guide to Longboarding for more info.
Of course, 2015 also stands for a line of new companies that drew a lot of attention on them and we are talking about some serious game-changers here. There was Sour Skateboards, who had an incredible launch (or are we talking of a comeback?) as well as Isle Skateboards (did you hear about the Bright European Skateboarding Awards 2016?), Krooked and many more. We are hyped for this year and can’t wait to explore whatever there is to come with all of you guys! We would love to know your opinion. Which are your favorite deck brands. Feel free to comment below.