Amazing! Great pop and amazing concave. Last for a long time as long as you don't get the bamboo board. They have an earthy style like element, but with a better board quality. The only reason they are not #1 is because they aren't as well known. You cannot snap these boards! I have skated them for a couple of years because they are so good. BUY ELEMENT BOARDS! You wont regret it.
Buy a quality deck. Decks available at your local department store are usually of low quality and have pictures of cartoon characters on the bottom. If you want an entire board, but don't know exactly what you want, buy a complete skateboard from a company or go to a skate shop and ask the employee about the products. If you want to ride on the streets, get a 7.5 to 8.0 deck, if you want to ride vert, 8.0 and up is probably best. However, it's all personal preference. People street skate all the time with decks over 8.0.
Hey, are you looking for a great fun with a fantastic ride? If YES, then longboarding will be the best option for you to realize all of your dreams. Longboarding is an effective form of physical exercise. You can also save money if you will use it when going to a nearby place. Also, if longboarding is your passion and if you are looking for the best longboard, you are in the right place to get additional information about longboards.

This is the way most serious skateboarders buy new skateboards.  In some cases they choose different brands for the wheels, bearings, trucks, deck, and hardware and customize it to their own unique style and preferences. The benefit to buying part like this you can replace only certain parts that are worn down and you have more control over each aspect of your skateboard.  I recommend this approach to intermediate and advanced skateboarders who want to experiment with different brands and styles.   However, if you are looking to try skateboarding for the first time or buy it as a gift for someone else I would recommend buying an already assembled complete skateboard.
Typically when looking at different completes you will see size dimensions in the format of ~7-8 x 31-34″.  This measurement is referring to the width and length of the skateboard deck.  Typically all other parts are relatively standard and the deck size is the main thing to look for.  Standard skateboard widths for beginners are between 7.5-8.25 with smaller boards being better for younger and smaller guys.  You don’t really have to worry about length much as long as it’s shaped regularly.  You may hear about the concave of the deck or a special type of board construction, but for the most part, it will not matter much to a beginner.  If you have no idea what size would be best you will never go wrong with a 7.5 or 7.75.
As the name implies, pro skateboard decks are decks made by well-known skateboard brands that typically feature graphics or logos related to a specific team rider.  Usually, pro decks are more expensive than team decks of the brand and much more expensive than blank decks.  The increased cost goes to the pro skater and it’s a way for the buyer to support their favorite skaters and brands.  Pro street decks are almost always Canadian maple, besides a few carbon fiber exceptions and they are the most commonly purchased decks see in skateparks and on the streets worldwide.

Founded in 2008 in Pennsylvania, Punisher’s goal has been to make graphically pleasing skateboards that have designs that resonate with the rider on a deeper level. Each artist is handpicked by Punisher to design an original, unique image that is then incorporated into the skateboard. The fantastic graphic designs combined with the quality of the skateboard itself make for a very personalized riding experience.
Unlike football and cricket, skateboarding has no age limitations. People might say that it’s an ideal sport for kids and teens but that’s not true. Even the oldies can step up on the skateboard and perform thrilling drills to have some fun activity in their routine. The biggest examples are Lance Mountain and Chris Millers who are showing their skateboard talent in their 40s and 50s and nobody knows when they will stop.
By raising £790,000, the Long Live Southbank[70] initiative managed in 2017 to curb the destruction of a forty years old spot in London due to urban planning, a salvaging operation whose effect extends beyond skateboarding. The presence of a designated skating area within this public space keeps the space under nearly constant watch and drives homeless people away, increasing the feeling of safety in and near the space.[71] The activity attracts artists such as photographers and film makers, as well as a significant number of tourists, which in turn drives economic activity in the neighborhood.[72]
The criteria used to select the brands featured varies – some are included due to their commitment to technological innovation and for their efforts to improve the products they offer through experimentation, others are included for what they offer in terms of cultural depth and for their contributions to skateboarding culture as a whole, whether that be through graphics, video output or simple attitude.
The DreadXBoards Concave Skateboard has Plastic Deck Injection Molded for excellent durability. It features Urethane Wheels 59mm 78a, aluminum trucks, and Abec 7 Bearings. It is completely assembled and is ready to ride. It is perfect for beginners or experienced riders. It can load up to 185 lbs. It is great for kids and adults. It has an excellent rating of 4 on Amazon.

Today's skateboarders are founders in this sport—they're pioneers—they are the first. There is no history in Skateboarding—its being made now—by you. The sport is being molded and we believe that doing the right thing now will lead to a bright future for the sport. Already, there are storm clouds on the horizon with opponents of the sport talking about ban and restriction.[16]
Real Skateboards are also notable for the brand’s deep involvement in raising awareness and funds for charitable concerns related to the skateboard community across the globe with the brand supporting everything from DIY skatepark builds, to releasing bespoke Real boards for fallen members of the skateboarding community including releasing a board in memory of UK skate shop owner and stalwart of the British skate scene Steven ‘Bingo’ Binks back in 2011.
Top Ten Worst Companies In the U.S.Best Skateboarding BrandsBest BMX Bike BrandsmcarzwashereBest Scooter BrandsBest Brands of Mountain BikesBest Lego ThemesTop 10 Best Assault RiflesRotorheadTop 10 Best Nerf GunsTop 10 Things to Buy with $100Best Knife CompaniesTop Ten Best Cigarette BrandspreachinpreachTop 10 Most Needed Survival SuppliesTop Ten Electronics BrandsMatrixGuyTop 10 Best Airlinescarvandog
Our only issue with Penny skateboards is that they are sold without grip tape. Though not necessary, it can make the ride a lot safer with grip tape. All in all, Penny is one of the top skateboard brands out there. Let us now look at a succinct brand scorecard of Penny Skateboards and see how it scores in various factors that we have considered while ranking the best skateboard brands.
^ Jump up to: a b Costello, Becca (November 10, 2005). "Skateboarding is not a sport: Skateboarding the Sacramento streets takes skill, balance and nerve. Just don't call it a sport". Sacramento News & Review. Retrieved December 10, 2012. Despite stickers, posters and T-shirts stating the contrary, it turns out that skateboarding is, in fact, a crime. “In the downtown district, you can skateboard as transportation,” Rafter explained. “Anything other than all four wheels on the ground and getting to where you’re going, they have a problem with.”
The ENJOI line of skateboards is made to professional standards, which means that not only are you getting a durable ride, but you’ll also get a skateboard made to handle a lot of situations. You can ride this board on the street, at the skate park, on trails, and more. These decks are made with a very consistent method that is ideal for trick riding, especially.

Moreover, we love the amazing variety of skateboards that Plan B has. Plan B’s team consists of some of the most famous professionals out there like Ryan Sheckler, Torey Pudwill and Chris Cole and all of their pro boards are available. Ranging from small skateboards (like Team Tripper mini) that are best skateboards for kids to their full size deck range that starts at 7.6 with the Felipe Flashback deck, Plan B has covered it all. Might I add that their full size skateboards are ideal for a smooth ride in the park and carve out all the turns perfectly. Most of the Plan B skateboards are around the 8 inch to 8.25 inch size which is the most popular size of the skateboard at the moment.
If you want to be able to practice your new hobby anywhere and everywhere, the Fade is an excellent choice. This is a short skateboard that measures only 27 inches long, made of lightweight (yet still durable) plastic. That means it’s easy to toss into a backpack and carry with you on your commute, to school, or anywhere. It’ll also fit into a locker at the gym or school quite easily.
We spent 43 hours on research, videography, and editing, to review the top options for this wiki. Whether you are an amateur or a seasoned pro, you'll find a skateboard among our selection that will have you doing everything from acid drops to wheel slides in no time. Or you can simply use one to get around town or to and from school. We've included models for younger riders through to adults, in styles and designs to match any taste, and at prices to meet any person's budget. When users buy our independently chosen editorial picks, we may earn commissions to support our work. Skip to the best skateboard on Amazon.

As the oldest brand on this list, Santa Cruz rightly holds the distinction of being the oldest skateboard brand in the industry and thus, the brand which effectively created the modern skateboard brand as we know it today. Founded as part of NHS Inc. a Santa Cruz based skateboard distribution company over 40 year ago, Santa Cruz as a brand has played a large part in every era of skateboarding history since its inception.


Bianca Chandôn’s offerings can be found in high-end shops like Trés Bien and Supply, while Call Me 917, the sister company focusing on producing skateboards and hosting a skate team can be found mostly at select skate shops, such as New York’s own Labor Skateshop, but is also stocked at elite retailers like Dover Street Market. This brand duality allows Olson the freedom to explore new fields like cut-and-sew and womenswear with Bianca, while staying true to skateboarding with Call Me 917.


If what you want is the classic skate park skateboard that you see teens riding around all day, the MINORITY is the board for you. This is an extremely sturdy and durable board that can hold up to 220 pounds, and is made for trick riding especially. The strong trucks, medium concave shape, and high-rebound bushing all make this a fantastic board for ramps, pools, and street riding.
The most common shape in skateboarding is called a popsicle shape. It has a curved tail and nose and features concave, which gives the board it’s shape. New skateboarders looking to learn how to carve, push, ollie, kickflip, and grind boxes, ledges, and rails should start with a popsicle shape. If you’re interested in knowing, we explain selecting a board by width, riding style, and board shape in the skateboard decks section of the buyer’s guide.
Lol, to begin riding I got a target board and it has lasted 1 years so far for me. If you are smart you will start with one of these so that you can see if you will actually stick with skateboarding. It also comes completely put together so you don't have to struggle through the proses of making your board as a beginner although some might say that is an important thing to learn as a skateboarder, wich I also agree with.
“I think it’s just also like, people want to have fun. If you watch say those types of Street League type of skateboarders, who are super amazing skateboarders that can push these crazy tricks down rails and stairs, like switch tre down fifteen stairs or whatever trick they do — it’s amazing to see that level of skating, but if you are an average Joe living in a small town you’re just like, “I’m never going to be able to kickflip back noseblunt twenty-stair rails”. That’s always the biggest trick. If you ask me it’s like, “What videos do you really enjoy?” The videos that you can some how relate to. Like, “Hey, I could actually do some of these tricks.” You connect to it and you feel like you can picture yourself being a part of the whole thing. When people put out these amazing super stunt skateboarding videos, pushing it to the furthest level possible, that’s rad in one sense, but to me personally as a kid I could never in my wildest dreams believe that I could do that too. I respect it. I understand it. But does it make me want to go skate? No.”

A skateboard is a special type of sports equipment crafted from a long piece of maple wood with a polyurethane coating for increased durability and easy sliding while in motion. The wood is attached to four wheels and propelled forward by either the push of a rider's foot or by the gravitational forces acting upon them in a given circumstance, which means that a rider can simply stand on the board's surface and ride it downhill without using their feet at all. Skateboards are available as either long boards or short boards. Long boards are usually between thirty-five and sixty inches long and are ideal for cruising purposes and downhill racing. They are typically more expensive than short boards, which are around thirty inches long and are designed for getting air and performing stunts or tricks.

The board itself is actually very portable in the sense that it only weighs a modest four pounds. Which means you can jump on and off in any situation that may warrant you to walk or ride. The ABEC7 bearings are top quality bearings and of the highest class. Also accompanying all of these fine features comes the kick-tail end of the board. This is to ensure that maneuvering and tricks can be performed with this utmost of ease.
When looking at skateboarding’s history, the only thing that’s stayed the same is the overall structure: every board consists of four skateboard wheels, two skateboard trucks, and a riding surface of some kind. And while we’ve come a long way from the days of metal and clay wheels, some aspects of skateboarding - like the brands manufacturing some of the most trusted products - haven’t changed at all. Independent Trucks has been designing trucks since 1978. Powell Peralta, the company responsible for Powell Skateboards, Bones Wheels, Bones Bearings, and the Bones Brigade also started in 1978. NHS, Inc., the company that produces Santa Cruz Skateboards, Independent Trucks, Bronson Speed Bearings, Krux trucks, Flip Skateboards, Ricta Wheels, Mob Grip, and OJ Wheels started in 1973. It’s no wonder these brands are still doing so well - they’ve been with skateboarding since the beginning. Since the day skateboarding went from something surfers did when the waves were flat to its own sport that involves technique, practice, and careful consideration, a small handful companies have been there to help skateboarding become what it is today.
Keep in mind that the deck width will also affect the size of the trucks that you use. You’ll need wider trucks to make a wider deck more stable. If you see a wide deck with narrow trucks, you can expect the ride to be wobbly and hard to manage. Pay attention to the bushings on the board as well. If the bushings are very firm, you’ll have a more stable ride, but it also makes it harder to turn. Soft bushings are much more responsive, but you do lose a little bit of stability. If you don’t know if your bushings are firm or soft, you likely have soft bushings, since this is the default.
Started by a group of guys who decided to stick together after the fall of Alien Workshop, Quasi skateboards presses boards and prints shirts featuring psychedelic art for the year 2015, offering something different than most board brands today. Backed by a team boasting hometown heroes and certified style gawds, Quasi is a board company everybody wanted that nobody had made yet.
There really isn’t a best brand….I prefer boards that are made in America by small companies or for small companies by mid sized companies. but that’s my general preference Watson and PS Stix also makes boards for a lot of companies (mostly outside the USA from what I understand) I have a couple of Welcome Jordon Sanchez decks (pressed by PS Stix) on my spare board shelf that I can wait to skate.
Polar’s focus on its European roots and representing a type of skateboarding that everyone could relate to, plus Pontus’ masterful approach to video-making and product, created a groundswell of popularity for the brand which has retained its momentum. Mixing a heavy global team with an eclectic approach to soft goods, Polar is now viewed as one of the most influential brands in the skateboard industry as a whole.

They have continued to ride that wave over the past year, continuously putting out great edits, following cherry up with Sickness, Red Devil, Joyride, and Swoosh, all in collaboration with cherry’s filmer Bill Strobeck. We all know they will never fall off when it comes to putting out fire gear every new season and drop, but to keep it coming with actual great footage is another story, and is definitely making skateboarding better today.
The logos you grow up with always mean more to you than the ones that came before or after. I'm not even going to suggest that I can be unbiased about something that means so much to me; but I also like to think that as a skater who has worked within the industry as an artist and a skate rat that grew up in the Midwest, I can separate my love of the activity from my personal feelings about the industry and companies. These are important logos for many reasons. Some are more powerful and meaningful than others but what I'm addressing are icons that have come to represent skateboarding in a lot of ways... succinctly and graphically.
It’s a beautifully designed affordable skateboard that provides an optimum ride for both amateurs and pro riders. Its high-rebound, hand-cast polyurethane wheels are built to deliver best roll and grip during an action. Its 7.625 inches wide and 31.625 inches long top board offers ample grip and stable ride for the beginners who are still learning to stand while riding without any fear of slipping off the board. Its colorful screen-printed bottom lets you ride in style. It is built to meet demanding specifications.
These boards are perfect! perfect shape (for me anyways) medium concave (which is better than deep or mellow in my opinion) perfect shape of the tail and nose, and have perfect pop (which last FOREVER) they're very durable too. Everything is perfect but why they're ranked so low is because not many people get deluxe boards than come here to write about how awesome they are.
Make no mistake, not all European skate brands are provincial microcosms. Cliché has one of the most stacked teams in the industry, including the Australian master of pop Andrew Brophy and manual wizard Joey Brezinski. But the real star of the squad is Frenchman Lucas Puig, who has a stellar signature shoe for adidas, and an upcoming line of caps called Hélas that you will undoubtedly be hearing more about in the near future. Team aside, thanks to strong art direction, a prolific video program, and a highly covetable product offering that includes a dope collab with NYC mainstay DQM, Cliché is très ill.

Real’s video output continued with Kicked out of Everywhere (1999), Real to Reel (2001) and Seeing Double (2002). Following these full-length releases Real adopted a different approach to video making with a number of shorter tour-based and remix video releases which chimed with the shorter attention spans of the Internet generation – these include titles such as Real ‘Remix Project V1.1 (2007) and Real ‘From the Vaults V.1 (2007).
Whilst early skateboarders generally rode barefoot, preferring direct foot-to-board contact, and some skaters continue to do so, one of the early leading trends associated with the sub-culture of skateboarding itself, was the sticky-soled slip-on skate shoe, most popularized by Sean Penn's skateboarding character from the film Fast Times at Ridgemont High.[8] Because early skateboarders were actually surfers trying to emulate the sport of surfing, at the time when skateboards first came out on the market, many skateboarded barefoot. But skaters often lacked traction, which led to foot injuries.[26] This necessitated the need for a shoe that was specifically designed and marketed for skateboarding, such as the Randy "720", manufactured by the Randolph Rubber Company, and Vans sneakers, which eventually became cultural iconic signifiers for skateboarders during the 1970s and '80s as skateboarding became more widespread.[8][76][77][78][79][80]
Skateboards, along with other small-wheeled transportation such as in-line skates and scooters, suffer a safety problem: riders may easily be thrown from small cracks and outcroppings in pavement, especially where the cracks run across the direction of travel. Hitting such an irregularity is the major cause of falls and injuries.[102] The risk may be reduced at higher travel speeds.
Thunder trucks are solid, with some great innovations. Thunder's light truck range claims ​to be the lightest available, with the quickest turning. Thunder's team is also pretty impressive, with Thomas, Appleyard, Marks, Steamer, Ellington. The list is actually pretty huge. If having a lot of pros ride the same trucks as you is important (which isn't a bad idea - these people are skating in competitions, and want the best!), then take a look at Thunder.
Theories of Atlantis is a brand that truly defies categorization. Josh Stewart’s brain child has gone through more phases than most companies, first being a means for him to put out his own series of Static videos featuring New York skaters, to now being a full blown distribution house for smaller boutique skateboarding brands featured on this list. Josh also puts out a line of soft goods with the turn of every season, playing off conspiracy theory style graphics and imagery on staple items like zip hoodies and long sleeves.
Bearings are standardized to fit in all kinds of skateboard wheels. All bearings will eventually get dirt and gunk in them which slows you down. Regular cleaning is recommended. Higher quality bearings will perform better, roll faster, retain more speed, and last longer when cleaned regularly. Some bearings come with bearing spacers or have spacers built into the bearing. These will fit in any wheel, but are not necessary for most types of skateboarding or longboarding.
Punisher Skateboards Warphant measures 31 x 7.5 inch.  It has a 9-Ply Maple Black Board with Concave Deck and Double Kick Tail.  It comes with ABEC-3 Bearings, 5-inch V-style Heavy Duty Alloy Trucks, and Bases.  It uses 54 x 36 mm PU injection molded wheels and PE Riser Pad with PU Cushion and Punisher Logo.  It is perfect for learning and doing tricks.  It is best suited for riders who are 8 years old and above.  It has a 5 rating on Amazon.
Decks come in a variety of shapes and sizes. You can choose a mini-board, a cruiser, a drop-through, or a standard deck for your favorite set of wheels and hardware. Widths range too from a few inches with a 22-inch board to the wide size of a true cruiser. Some decks are flat as possible while others are significantly concave for optimized turning. You can buy a deck with artwork and grip tape already attached for a quick install or you can get a bare-bones wooden deck to truly customize.
×