The wheelbase of a skateboard deck is the distance between the centers of the inner most truck mounting holes. This distance ranges between 13.5 to 16 inches and is generally proportional to the deck length on standard popsicle decks. Some specially shaped boards and cruiser decks have differing length/wheelbase ratios. Wheelbase can impact stability and turning radius, but the effect is often subtle and not a major concern for a beginner.
It is a mini-cruiser, which is known for its strength as well as its ability to offer real value for the money you spent. This skateboard can also be expected to deliver an impressive performance – thanks to the Abec 7 skatro bearings used in it. There are also 59-mm urethane wheels and the 3-inch GOLD aluminum trucks that can help smoothen each ride.
Mini Cruisers have exploded in popularity in recent years. These short and skinny boards may not have the versatility of a standard skateboard, allowing for a full range of tricks and travel, but they are ideal for urban and college living where space for storage and riding are both minimal. If you want to ride a mini-cruiser, but you hate the plastic decks or you want to build your own, check out the Bamboo Skateboard mini cruiser deck.
Krooked’s video release to date include ‘Krooked Kronichles‘ (2006), the experimental ‘Krooked – Gnar Gnar‘ (2007) only released on VHS in limited numbers, predating the explosion of interest in the outdated VHS format as foregrounded by brands such as Palace skateboards some years later, ‘Krooked – Naughty‘ (2008) and Krooked – Krook3D (filmed in both regular and 3D formats) (2010).
The magazine only lasted four issues, but resumed publication as Skateboarder in 1975.[16][17][18] The first broadcast of an actual skateboarding competition was the 1965 National Skateboarding Championships, which were held in Anaheim, California and aired on ABC’s “Wide World of Sports.[19][20] Because skateboarding was a new sport during this time, there were only two original disciplines during competitions: flatland freestyle and slalom downhill racing.[6]
Remember don't get those cheap skateboards from Walmart. They won't hold up to any skating and can break from a single ollie that is landed improperly. I know they are cheap, but 2 cheap boards a week for a few weeks adds up to the price of 2 or 3 expensive boards. These boards are also heavier and slow which makes them much more difficult to do tricks on.
Magenta Skateboards are one of only a few mainland European based brand in this list, founded in Paris and currently based in Bordeaux, France. Magenta’s outlook on skateboarding as a cultural phenomenon, and consequently their output in terms of both products and video, is deliberately at odds with the prevailing conception of skateboarding as represented by most major brands.

The skateboard is directional, so if you’re skating switch the tail end will be forward, though, it makes for an easy switch heel flip. The deck itself is plastic. The skateboard dimensions are 3x6x22 inches. The wheels are 59MM urethane custom Skatro brand wheels. The bearings are ABEC 7 Skatro bearings. The trucks are 3 inches aluminum trucks. The board itself is only a light 4.7lbs and comes in one color.


Skateboards are for people who want to try something new and extreme.  If you have not given it a shot and you want to challenge yourself then you should try skateboarding.  It is a fact that there are certain risks that go along with skateboarding.  However, skateboarding can teach you to balance and it is also a great way of losing weight.  Skateboarding can also help you in making friends while you are in the park.  With skateboarding, you can learn perseverance and build confidence.
The promo was followed in late 2012 by another Polar Skate Co. Promo – No complies & wallrides & shuvits again filmed in and around Malmo, Sweden as well as Copenhagen, Denmark, New York and London, featuring skaters who appeared in the original promo, plus new addition and former Uk-born Blueprint skater Jerome Campbell and New York based Aaron Herrington who would go on to turn pro for Polar.
It's been a long time since Cara-beth has had a feature in an international skateboard publication and in the September 2008 issue of The Skateboard Mag the longtime silence has been broken with a CB interview. With that in mind there was an impromptu launch party for the issue at the Encinitas Y that found longtime CB mentor Duane Peters, Dave Hackett, Lester Kasai and Tony Mag in attendance. Short but sweet skate session on the vert and bowl ensued and all went home happy. Congrats on a job well done Cara-beth!
In the early 1970s, Frank Nasworthy started to develop a skateboard wheel made of polyurethane, calling his company Cadillac Wheels.[7] Prior to this new material, skateboards wheels were metal or "clay" wheels. The improvement in traction and performance was so immense that from the wheel's release in 1972 the popularity of skateboarding started to rise rapidly again, causing companies to invest more in product development. Nasworthy commissioned artist Jim Evans to do a series of paintings promoting Cadillac Wheels, they were featured as ads and posters in the resurrected Skateboarder magazine, and proved immensely popular in promoting the new style of skateboarding.
Progressive designs deliver a more dramatic upward curve and a wider base, providing increasingly secure footing and a locked-in feel. The W-concave shape is more narrow with an additional center curve, allowing for a greater shift in energy between the heel and toe. This design also boasts more responsive control and quick turning capabilities. Tub concave decks resemble the radial shape, however their rails extend at a sharp angle instead of a gradual curve. Asymmetrical decks feature rails that extend at different angles, affording more power to a rider's heels when making turns. Less commonly used are decks with convex and completely flat shapes. Convex boards offer an upwards-arching shape, which some downhill skateboarders prefer for a more natural feel, whereas flat designs increase available foot space and are more popular for experienced riders looking to perform fancy tricks.
Founded by the pro skateboarder Marc Johnson in the year 2000, enjoi has been on the market for over two decades now. They have since expanded, and started producing skateboarding accessories and clothing apart from just skateboards. Since then, they have adopted a panda as their logo. This logo is featured on most of their products and has quickly become the company’s trademark.
Real’s video output continued with Kicked out of Everywhere (1999), Real to Reel (2001) and Seeing Double (2002). Following these full-length releases Real adopted a different approach to video making with a number of shorter tour-based and remix video releases which chimed with the shorter attention spans of the Internet generation – these include titles such as Real ‘Remix Project V1.1 (2007) and Real ‘From the Vaults V.1 (2007).
Following Jason Dill and AVE leaving long time sponsors Alien Workshop back in 2013, Dill’s 13-year-old Fucking Awesome brand, which was formerly a clothing brand, became a board brand and began to add riders such as Dylan Rieder (RIP), Gino Iannucci, Jason Dill, Kevin Bradley, Nakel Smith, Sean Pablo, Sage Elsesser, Tyshawn Jones and Aiden Mackey.
Independent has been making skateboarding trucks for over 25 years. Independent's Stage 9 truck series are quality made, lightweight and still durable. They also feature "Fast Action Independent Geometry," which means they are designed to react more quickly to your motions than other trucks. Independent trucks are usually on the wider side, but all sizes are available. Independent trucks are also guaranteed for life against manufacturer defects but should last forever anyway.
Aside from their prodigious online output since the release of their last full-length video, (often via Daewon Song’s own Instagram account which currently has close to a million followers alone), Almost are also renowned for their experiments in board construction technology – in particular the Almost Impact Support range and the Über Light series which incorporate carbon-fibre into skateboard construction to reduce weight and increase strength/flex.
Baker is a classic good old fashioned, anti-establishment skateboard brand.  Baker has a great professional team including founder Andrew Reynolds.  Reynolds is also heavily involved in other well-known skateboard brands like Deathwish, Emerica, and Shake Junt.  Notable street artist Neckface has a limited edition line of Baker decks that is one of the coolest in skateboarding in my opinion.

Ohderii Skate Skateboards are made of a High-quality Plastic deck which will not easily break even when pressed over by a car.  It comes with 3.125″ all aluminum alloy trucks, 59mm 78A super smooth PU wheels and ABEC-7 stainless steel bearings.  It is ready to use and you can easily store it in your backpack.  It has an average rating of 4.5 on Amazon.


Skateboarding has also become a major source of inspiration for high-end fashion brands, as they design their own interpretations of the skate culture and style from graphic T-shirts, five-panel hats, cropped, wide-leg pants, and skateboarding sneakers from the brands like Vans. But there’s no faking the original, and the brands that do it best are the ones that have a long-time heritage in the sport of the board, unlike the luxury labels simply trying to capitalize on the look.
Grind King skateboard trucks are the best trucks available for grinding. The truck hangar is made from aluminum, making it softer and weaker, but better for grinding. This means you will have to replace them faster if you grind, but your grinds will be smoother and better. Grind King trucks do use special hex-head kingpins, so you will need a special tool to adjust them.
Quality wheels won’t mean much if you don’t have nice bearings which allow the wheels to spin freely on the axle of the skateboard truck. A quality set of bearings will spin well right away and actually get even better once broken in a bit. If quality bearings get dirty, they can typically be taken apart and cleaned relatively easily. A good set of bearings typically runs between $10 - $16.
For those of you who don't know, Mark Gonzales isn't just an artist who occasionally pens logos for Supreme. He's a bonafide legend, as an artist, a skater, and a personality. His brand Krooked is a perfect expression of that, with art direction from the man himself, and a videography of skate flicks that includes essential viewing Gnar Gnar, Kronichles, and Naughty. Supreme may top Krooked on this list, but true Gonz stans will always represent with Krooked.
If you want to do cruising and street style on the same board then you probably want a large board and larger wheels, as many have already commented. I think that an 8 inch board with at least 56 mm wheels will be best. I think that you should find a local shop to support and to talk to about gear. I would advise getting a shop deck, with Independent trucks (at the correct width for your board, which is one detail that a local shop should be able to help with) Bones street tech formula wheels (I like profiles 1 and, I think 5), and Bones Reds bearings (not super reds, super reds are not super).
We love Powell Peralta for a number of reasons as do all its customers but the foremost reason being its variety in terms of the skateboards that it manufactures. It has a collection of 30 different skateboard models, with a fusion of unique graphics and colors. They offer different skateboards that you can choose from, depending on your riding style, budget, body fitness and riding style.
The Quest can be considered as the best improving Longboard brand because in 2014 it was in the 4th position, whereas in 2018 it is in 2nd place. This is a good improvement for a Longboard brand in these competitive days! Even though it is now in 2nd place, it has a little gap with Sector 9. They mainly focused on the customer’s needs by collecting client opinions. They have been improving the size, quality, performance, speed, design, and color of their longboards.
Skateboarding damages urban terrain features such as curbs, benches, and ledges when skateboarders perform "grinds" and other tricks on these surfaces.[112] Private industry has responded to this problem by using skate deterrent devices, such as the Skatestopper, in efforts to prevent further damage and to reduce skateboarding on these surfaces.[112]
The deck is expertly constructed with a vertically laminated bamboo core and bamboo veneer exterior, all attached with triaxial glass and epoxy as well as a course grip tape top. The grip tape is arranged in an unusual and stylish, yet functional, design. The 34-inch board features a 13-degree nose angle and an 18-degree tail angle. With its directional shape, you’ll easily be able to cruise on this board or pull a few tricks.
×