This board also has a unique shape that makes it a lot easier to ease into turns, which is something that longboards aren’t always known for. It’s a lot easier to push off on this deck thanks to how low it sits, and you also get a one-year warranty from the manufacturer should anything go wrong. If you’ve never ridden on a board before, and don’t want to learn tricks right away, this is a great choice, especially if you’ll be riding around a lot of mostly flat areas.
Made with bamboo and fiberglass, this board is tough, flexible, and ready for anything. The construction is designed to feel and act like a snowboard. The drop-through design is perfect for freestyle longboarding, commuting, carving, pumping, and more. It gives you better stability and more wheel clearance. The board is definitely best designed for carving but tricks and kicks are easily done as well.
Peralta put together the Powell skate team under the Bones Brigade moniker, employed the services of photographer, artist and visionary C R Stecyk III and was the talent scout responsible for bringing skaters such as Tony Hawk, Rodney Mullen, Lance Mountain, Mike Vallely, Guy Mariano, Tommy Guerreo and inventor of the ollie Alan ‘Ollie’ Gelfand, (amongst many others) to the attention of the global skateboard community.
When you’re searching for one of the best decks on the market, it’s important to not go overboard. You don’t need one that is made from the rarest wood or that has the most unique design. The best boards may be the ones that balance cost, design, and quality. After all, with healthy use, you’ll eventually have to replace your deck anyway. You want the one that will give you the most functionality and enjoyment while you use it.

The fact that it has nice and attractive prints also makes it a fashion skateboard. You can use it to show not only your passion in the sport but also your fashion sense. It is also equipped with a high-density emery surface known for being both waterproof and non-slip. With that, you have a hundred percent assurance of your safety when you are riding on it.
Grip tape adds additional assurance for a rider's feet. It is made from a sheet of colored paper or fabric with adhesive on one side and a fine, sand paper surface on the other. Applied to the top surface of a skateboard, grip tape gives a person's feet an improved grip while maintaining stability for performing tricks. Skateboard trucks connect both the wheels and ball bearings to the deck and are directly attached to the deck themselves. They are usually constructed from aluminum alloy. The wheels are mounted to their axles via steel bearings. The wheels are made from polyurethane and available in a range of different shapes and sizes to suit most any skill level.
In March 1976, Skateboard City skatepark in Port Orange, Florida and Carlsbad Skatepark in San Diego County, California would be the first two skateparks to be opened to the public, just a week apart. They were the first of some 200 skateparks that would be built through 1982. This was due in part to articles that were running in the investment journals at the time, stating that skateparks were a good investment.[6][27][38] Notable skateboarders from the 1970s also include Ty Page, Tom Inouye, Laura Thornhill, Ellen O'Neal, Kim Cespedes, Bob Biniak, Jana Payne, Waldo Autry, Robin Logan, Bobby Piercy, Russ Howell, Ellen Berryman, Shogo Kubo, Desiree Von Essen, Henry Hester, Robin Alaway, Paul Hackett, Michelle Matta, Bruce Logan, Steve Cathey, Edie Robertson, Mike Weed, David Hackett, Gregg Ayres, Darren Ho, and Tom Sims.[35]

Founder Richard Novak is also widely credited as creating the skateboard industry as we know it today by establishing skateboarding as a separate culture and business by wrestling the sport away from the control of the roller-skating industry in the early 1970’s and promoting it through sponsoring events, supporting the nascent skateboard magazine culture, pioneering technologies within skateboard, truck and wheel construction and establishing the edgy cultural identity of skateboarding from the very beginning.


Krown Rookie complete skateboards are a prime example of a product that is well liked, and of great quality. Just like with the previous Krown product we discussed, the company has given us several colors of the product o choose from. This is a great addition, since it helps riders personalize their rides whichever way they want. It also limits the possibility of running into someone that is sporting the same skateboard at you!

What started off as a crew of Montreal skaters filming full videos featured on SLAP magazine has suddenly turned into one of the highest quality and apparel brands in skating today. When Virgil Abloh drops by to your pop-up shop and your skate contest, you must be doing something right. Coming fresh off a recent collaboration with Vans, Dime seems to be keeping the clean silhouettes and instant classics on deck.
The 18 has made some moves over the past few years that have shown they’re not a bunch of old hesh dudes that piled out and are just holding onto their stronghold with guys who are all about tattoos and brews. They collabed with Supreme and had one of their legends, Andy Roy, model the lookbook, and also put out Destination Unknown, a full video about their vagabond travels in the hunt for anything to skate. Most recently, they released What’s Up Monkey?, an all iPhone full-length video shot all across the world.
There are actually several types of skateboards but the most common ones are the longboard, cruiser, and carve skateboards. A longboard is usually at least 33 inches. It is a great mode of transportation and works well for cruising around. The cruiser also works well as a mode of transportation but many consider it more beneficial as it has a shorter skateboard, which promotes ease in transporting around.

However, the deeper the concave is, the less stable the board will be for beginners. If you are still gaining confidence on a skateboard, it is best to start with something less dramatic. A longboard is often completely flat, or nearly so, and that makes it better for cruising on a very stable surface. This is a great choice for riders who aren’t necessarily interested in learning tricks.
Swing boarding is the activity where a skateboard deck is suspended from a pivot point above the rider which allows the rider to swing about that pivot point. The board swings in an arc which is a similar movement to riding a half pipe. The incorporation of a harness and frame allows the rider to perform turns spins all while flying though the air.

When looking at skateboarding’s history, the only thing that’s stayed the same is the overall structure: every board consists of four skateboard wheels, two skateboard trucks, and a riding surface of some kind. And while we’ve come a long way from the days of metal and clay wheels, some aspects of skateboarding - like the brands manufacturing some of the most trusted products - haven’t changed at all. Independent Trucks has been designing trucks since 1978. Powell Peralta, the company responsible for Powell Skateboards, Bones Wheels, Bones Bearings, and the Bones Brigade also started in 1978. NHS, Inc., the company that produces Santa Cruz Skateboards, Independent Trucks, Bronson Speed Bearings, Krux trucks, Flip Skateboards, Ricta Wheels, Mob Grip, and OJ Wheels started in 1973. It’s no wonder these brands are still doing so well - they’ve been with skateboarding since the beginning. Since the day skateboarding went from something surfers did when the waves were flat to its own sport that involves technique, practice, and careful consideration, a small handful companies have been there to help skateboarding become what it is today.


The best criticism you could make about skateboarding in general right now is that it takes itself too seriously. Rightfully so. Skateboarders are often under attack, and what they do is illegal in most places. Skate culture is constantly being ripped off and bastardized. That's why it's so important to have a healthy sense of humor about it all, and that's why it's important that skateboarding has Roger.
Now you need to look at the wheels of your skateboard. There are dozens of different sizes, materials, shapes, and features of skateboard wheels, and it can get confusing for beginners. The most common type of wheel is a hard plastic wheel, and for beginners, you’ll usually see a “90a” level wheel. Professional skaters often choose even harder wheels, up to a 100a, because it gives them more “pop” for tricks. But somewhere between a 90a and a 97a is usually best for beginners.
After expanding from a successful board brand featuring Pontus’s own art and photography, the brand grew into making a high quality line of apparel that borders between athletic wear and traditional skate style. Over the last couple of years, Polar dropped jerseys and polos in high quality athletic materials, collabed with Converse on a couple of Chuck Taylors, and always kept a steady stock of their classic heavy chinos and hoodies, building up a brand you could literally rock head-to-toe.
Sending sincere thanks to everyone that supported us over the last decade – including team riders, fans, customers, photographers, filmers, & mags. Thanks to George & Juli Powell & everyone at Skate One Corp. who believed in us & helped facilitate our vision. Thanks most of all to Cara-Beth Burnside for whom without her influence, leadership, & no-bullshit-spirit none of this would have ever been possible.

Proper skateboard wheels are made out of polyurethane with minimal additives. Toy skateboard wheels can be made of plastic or a low quality poly mix which leads to poor performance in the best case and even outright dangerous situations with cracked wheels in the worst case. This is a case where brand recognition and reputation can come into play. 

After expanding from a successful board brand featuring Pontus’s own art and photography, the brand grew into making a high quality line of apparel that borders between athletic wear and traditional skate style. Over the last couple of years, Polar dropped jerseys and polos in high quality athletic materials, collabed with Converse on a couple of Chuck Taylors, and always kept a steady stock of their classic heavy chinos and hoodies, building up a brand you could literally rock head-to-toe.


A skateboard is fundamentally a sum of its parts. If you want a good skateboard, you’ll want each component to be high quality. We’ll take a look at each part of a skateboard and talk about what quality means for the that component. We’ll try to give tips on how to spot a high or low quality implementation of that component and then we’ll share how SkateXS Skateboards measure up.  
Many of the most popular skateboard brands sponsor teams of skaters, like Zero's Jamie Thomas and Element's Barn Margera. Professional skaters are often good sources of information as to what skateboard you should buy. If a pro skater rides a certain board, there is a good chance that if he or she finds that it is high enough quality you will also like the board. Users looking for a new skateboard will want to research a variety of different brands to find the one that best suits their needs, based on function and features.

The deck is expertly constructed with a vertically laminated bamboo core and bamboo veneer exterior, all attached with triaxial glass and epoxy as well as a course grip tape top. The grip tape is arranged in an unusual and stylish, yet functional, design. The 34-inch board features a 13-degree nose angle and an 18-degree tail angle. With its directional shape, you’ll easily be able to cruise on this board or pull a few tricks.


Lovenskate have produced a number of full-length videos throughout the 16 years of their existence, including the 2015 release Lovenskate – Smorgas’board although more recently they have followed the direction of skate media in general and concentrated on releasing shorter, rider-specific clips such as Jordan Thackeray’s Welcome clip and more recently the Batch Capture series.
Well, independent skateboard brands, like Birdhouse skateboards or Blind Skateboards are prevalent. The DIY factor over the various skateboarding brands of course, acquires attention for the beginners in skating. But, for intermediate and expert level jumps, the names of best selling skateboard brands rule the market. Everyone considers the top 10 skateboard brands, but we have explained the top 12 skateboard brands for you. Why do we consider these top 12 skateboard brands? Well, our inclination lies in quality and efficiency. Whether, you belong to the beginner or expert level, whether you seek for the skateboard shoe brands or skateboard deck brands, we are here to assist you.
Punisher Skateboards Warphant measures 31 x 7.5 inch.  It has a 9-Ply Maple Black Board with Concave Deck and Double Kick Tail.  It comes with ABEC-3 Bearings, 5-inch V-style Heavy Duty Alloy Trucks, and Bases.  It uses 54 x 36 mm PU injection molded wheels and PE Riser Pad with PU Cushion and Punisher Logo.  It is perfect for learning and doing tricks.  It is best suited for riders who are 8 years old and above.  It has a 5 rating on Amazon.
Skateboards have been gaining an increasing popularity since the end of the 1990s. Since then, it has been a common hobby and form of entertainment for many. However, due to the popularity of skateboards now, it can be hard to find a reliable and quality product. There are plenty of skateboards out there that will break easily when placed on harder gravel. That’s why we made this article, the list and the information sections, to help you choose the best product for you.
Pro decks are what most people are familiar with and what is seen most commonly around skateparks and driveways around the US.  These decks can have a variety of different logos and images on them and sometimes are a specific professional skater’s pro deck.  Pro decks provide skaters a way to support their favorite riders and have the same equipment they see all their favorite pros using.  The quality of professional decks and parts are almost always very high as they have a reputable and brand image to uphold.  For this higher level of quality and you can expect to pay 2-3x the cost of a blank complete.  If you want to save some money and still have a pro look, there are options available that have generic blank parts with a pro deck.  This may be a good option for a beginner skater who is not yet doing complex tricks that may break these cheaper parts, but they still want the look and feel of a pro skateboard.  As the skater progresses they can then switch out these generic parts for higher-end options as necessary.
Launched in 1991 by professional skateboarder Mike Ternasky who was killed in a car accident in 1994, Plan B Skateboards was renewed in 2005 by professional skateboarders Danny Way and Colin McKay. The top Skateboards brand, recognized by its unique logo, offers customization, but it also produces skateboards that come already assembled and ready for immediate action with everything a skateboarder needs including the deck, wheels, trucks, and bearings. The decks are made with a durable and thick seven-ply maple. They are also designed for you to make them uniquely yours with cool graphics that reveal your personality. In addition to the decks, Plan B also produces wheels, toolkits, and the kind of hip clothing that every skateboarder wants to be seen wearing. In addition to Way and McKay, the Plan B team consists of pro skateboarders PJ Ladd, Chris Cole, Pat Duffy, Ryan Sheckler, Torey Pudwill, Leticia Bufoni, Chris Joslin, Felipe Gustavo and Sean Sheffey.
Aside from keeping the more fashion-oriented side of skateboarding placated with ultrasoft crewnecks and clean 6 panel caps, Dime keeps the side of skating focused on actual footage and hijinks fed through their Instagram and Snapchat accounts (@dimemtl), where they post their day-to-day in Montreal doing what skateboarders do best: having fun with their friends.
Quality wheels won’t mean much if you don’t have nice bearings which allow the wheels to spin freely on the axle of the skateboard truck. A quality set of bearings will spin well right away and actually get even better once broken in a bit. If quality bearings get dirty, they can typically be taken apart and cleaned relatively easily. A good set of bearings typically runs between $10 - $16.
Many jurisdictions require skateboarders to wear bicycle helmets to reduce the risk of head injuries and death. Other protective gear, such as wrist guards, also reduce injury. Some medical researchers have proposed restricting skateboarding to designated, specially designed areas, to reduce the number and severity of injuries, and to eliminate injuries caused by motor vehicles or to other pedestrians.[102]
The grip tape found on a skateboard can actually be defined as the grainy sheet, which resembles sandpaper that also comes with a sticky underside. Such underside needs to adhere to the deck’s surfaces as a means of increasing traction or grip. No matter what skating style you use, the grip tape is extremely helpful in your attempt to stay on the board.
Founded in 1994, and going strong ever since, Globe is one of the top quality skateboard brands in the world. They are a global producer and distributor of skateboards and skateboarding gear; selling products in over 100 countries. This is the best brand of skateboard. They are known for their purpose-built apparel, skateboard decks, trucks, wheels, etc, footwear and major surfing and skateboarding events (just to name a few of their ventures). Due to their presence in the boarding industry, Globe has gradually become one of the best skateboard brands in the market.
Another great pro option, Element is definitely one of the top 3 brands in skateboarding.  This deck is also slightly slimmer than the Enjoi deck above so it would be an even better choice for someone with small feet or who is very young.  This board has an iconic look that will be recognized by most skaters, and it has the quality to last much longer than most other skateboards on the market.
The average width of decks available in skateboards is eight inches, however; there are many different varieties available as well. A wider deck provides you better balance as compared to slimmer kinds but it does not allow you to perform skateboard tricks. Decks come in a variety of materials that include wood, fiberglass or carbon. Considering the price, plastic decks come cheaper, but if we will consider quality then other options though more expensive will prove worthwhile.

There’s no way have never seen a Palace logo at this point, and if you haven’t that’s cause you shleep, bruh. Palace is one of the best out there doing the whole “high fashion or skate brand?” thing, and they hold a unique place on this list for being one of the few brands not based and started in the U.S. The Palace Wayward Boys Choir, like many before them, turned their group of friends into a successful crew of respected pros, who you will never see on Fox Sports 1 skating in a multi-million dollar contest.


With Enkeeo 22 Inch Cruiser Skateboards, you can cruise in style.  It has a dimension of 22 x 6 inches.  It comes with 3″ Black Coated Habitat trucks, Black 60mm Smooth wheels, and Abec11 bearings. It’s ready to ride and you can even personalize the tail of the board for free with a limitation of 10 Characters only. It has 30 days warranty and is manufactured in California.  It has a perfect 5 rating on Amazon.
Navigator is a newer truck company and may be hard to find (the Navigator site has a store locator that should help). I've listed them here because they have some unique features on their trucks. For example, they have a special addition beneath the baseplate that holds the kingpin in place so bushings can be replaced without taking the trucks off of the skateboard. Also, Navigator is the only truck company that pins their axles, so they can guarantee their axles will NEVER slip! The Navigator site lists many other features - take a look and see what you think.
Typically when looking at different completes you will see size dimensions in the format of ~7-8 x 31-34″.  This measurement is referring to the width and length of the skateboard deck.  Typically all other parts are relatively standard and the deck size is the main thing to look for.  Standard skateboard widths for beginners are between 7.5-8.25 with smaller boards being better for younger and smaller guys.  You don’t really have to worry about length much as long as it’s shaped regularly.  You may hear about the concave of the deck or a special type of board construction, but for the most part, it will not matter much to a beginner.  If you have no idea what size would be best you will never go wrong with a 7.5 or 7.75.
The Quest can be considered as the best improving Longboard brand because in 2014 it was in the 4th position, whereas in 2018 it is in 2nd place. This is a good improvement for a Longboard brand in these competitive days! Even though it is now in 2nd place, it has a little gap with Sector 9. They mainly focused on the customer’s needs by collecting client opinions. They have been improving the size, quality, performance, speed, design, and color of their longboards.
Habitat proved itself as an established power in skateboarding when it survived the downfall of the parent company that owned and killed Alien Workshop, being able to persevere and even name new pros through the whole restructuring. They moved their products under Tum Yeto Collective, the parent company/distribution house of other powerhouse skateboard brands like Toy Machine, and now it’s as if they were never in any danger. If you have any doubts about why Habitat is on this list, just watch Mark Suciu’s part in Search The Horizon and never question it again.
Girl’s next full-length video came in 2003 with the release of ‘Yeah Right‘ which introduced a crew of younger Girl riders including Paul Rodriguez and Jereme Rogers, along with announcing videographer Ty Evans addition to the Crailtap family. From 2002 onwards, Ty Evans had been the main driving force behind Crailtap’s video output as Spike Jonze’s Hollywood directorial career took off.
×