Freestyle skating remained healthy throughout this period, with pioneers such as Rodney Mullen inventing many of the basic tricks that would become the foundation of modern street skating, such as the "Impossible" and the "kickflip". The influence that freestyle exerted upon street skating became apparent during the mid-1980s; however, street skating was still performed on wide vert boards with short noses, slide rails, and large soft wheels. In response to the tensions created by this confluence of skateboarding "genres", a rapid evolution occurred in the late 1980s to accommodate the street skater. Since few skateparks were available to skaters at this time, street skating pushed skaters to seek out shopping centers and public and private property as their "spot" to skate. (Public opposition, in which businesses, governments, and property owners have banned skateboarding on properties under their jurisdiction or ownership, would progressively intensify over the following decades.)[40][41] By 1992, only a small fraction of skateboarders continuing to take part in a highly technical version of street skating, combined with the decline of vert skating, produced a sport that lacked the mainstream appeal to attract new skaters.


Regardless of the length of these boards, they each have several components in common that include a deck, grip tape, trucks, and wheels. The deck is the actual surface piece of the board on which a rider stands to perform tricks or control their degree of motion. Decks range between seven and ten inches in width and although seven-ply wood is the most common material for them, they can also be crafted out of bamboo, carbon fiber, and even plastic. Decks are shaped in several unique concave designs, which include radial, progressive, W-concave, tub, and asymmetric. Radial concave decks have U-shaped curves and are ideal for beginners, as they provide one's feet with a reliable grip.
In sports like football, cricket and swimming, you have to follow certain rules and adopt a particular style in order to perform well. But that’s not the case with skateboarding. This sport allows skaters to enjoy their unique style without any restrictions. From drills to cruising and rail tricks, you can do whatever you like in your very own created style. Everyone skates in their own style according to their convenience.
However, the deeper the concave is, the less stable the board will be for beginners. If you are still gaining confidence on a skateboard, it is best to start with something less dramatic. A longboard is often completely flat, or nearly so, and that makes it better for cruising on a very stable surface. This is a great choice for riders who aren’t necessarily interested in learning tricks.
Amongst the chaos of trends and contrived images GOOD Skateboards remains true to the roots. The preach and practice of the philosophy that it's not WHAT you do but HOW you do it. Spear headed by legendary pro Tosh Townend, GOOD Skateboards is that much needed breath of fresh air in an industry polluted by heartless money fiends and exploitative mind sets. Made in the USA and as Grass Roots as you could possibly get Tosh and good friend Tommy De Maria bring to you something straight from the core of skateboarding; actual skateboarding. No egos, no attitudes; GOOD Skateboards' roots run deep with an utmost respect for skateboarding's past and a rich understanding of skateboarding's history. Support GOOD and support skateboarding in the hands of skateboarders.
Positiv decks are usually maple, but some are hard birch. They are made using the same laminating process and glue that Powell Peralta boards use. These decks have Positiv’s super slide treatment (SST), which is essentially a plastic lining that makes the board slide more easily. The stuff works, and wax becomes less necessary for slides with these boards.
Krown’s motto is to provide quality skateboards on a budget. They manage that surprisingly well; not only are their products at budget prices, but they can take quite a lot of beating too. Their skateboards arrive readily assembled and ready to ride. You won’t have to spend hours fiddling with screws and bolts to ride your new prized possession! No matter if you are a beginner or an expert looking for a good board to ride on, Krown’s product is made to fit everyone’s needs.
(2) Goldchain, Michelle (July 31, 2018). "Why is Pennsylvania Avenue's Freedom Plaza such a failure?". Greater Greater Washington. Retrieved October 30, 2018. One group of people do use Freedom Plaza regularly: skateboarders. The open hardscape and railings of Freedom Plaza make an excellent and popular skate park, though skating there is not actually allowed and Park Police regularly chase skaters from the park.
The ENJOI line of skateboards is made to professional standards, which means that not only are you getting a durable ride, but you’ll also get a skateboard made to handle a lot of situations. You can ride this board on the street, at the skate park, on trails, and more. These decks are made with a very consistent method that is ideal for trick riding, especially.

A magazine?! This is an outrage! Yeah, it is. But Low Card has become the defacto hat brand for all the cool hesh skaters in America, so deal with it. Also, the mag's graphic tees, baseball shirts, coaches jackets, and beanies are all highly dope. The custom mesh hat program is the way to go if you feel the need to wear your “yeah, I skate” calling card on your head.
The board also boasts of its reasonably small size and lightweight nature, making it easy to control and ride. In addition, carrying it wherever you want to go is also much easier because of its lightness. It is flexible enough that it can accommodate the needs of different kinds of users, including cruisers, travelers, beginners, expert riders, and kids.
Want the same great performance and high-quality construction as a name brand deck but don’t have a large budget?  Blank decks are your answer. Depending on the brand, blank decks can be similar or better than pro decks and are available in just as many or more shape options.  These decks are perfect for people who love skating and don’t really care about supporting a profession or the graphic on their deck.  Blanks are also great for aggressive skaters who go through decks quickly as many blank skateboard decks are sold in bulk packs of 3, 5, or even 10 decks per pack.

Toy Machine is an Ed Templeton company and one of the best skateboard companies of its time. Ed is an Orange County original skater and developed the board he wanted to skate on, thus creating the Toy Machine Brand. Though the Toy Machine team has seen many changes, it has always held onto professional skaters that can provide insight in the latest needs of boards. Toy Machine skateboards are known for their signature monster graphics, which have made them a top skateboard brand.


They are also budget friendly when you compare their features and capabilities. The latest technology of developing created a new groundwork in the world of skates. That way the new skaters can quickly learn how to become better and how to practice for professional tournaments. It is widely popular, and that is the main reason why you will see at least one Alien skateboard in any skate park in the world.
If you’re a beginner and you want a board that gives you a little of everything to discover, you cannot go wrong with this ENJOI board. You get everything you need, all ready to go out of the box, and made with professional-grade components. The ENJOI also earns points for having that classic cool artwork on the deck that makes it fun to show off at the park.
Founded in 2008 in Pennsylvania, Punisher’s goal has been to make graphically pleasing skateboards that have designs that resonate with the rider on a deeper level. Each artist is handpicked by Punisher to design an original, unique image that is then incorporated into the skateboard. The fantastic graphic designs combined with the quality of the skateboard itself make for a very personalized riding experience.
Here's a list of the best skateboard truck brands (read about Trucks in the Skateboard Dictionary). Trucks can be expensive, and picking out the right set of skate trucks can seem tough. But, if you get a pair of trucks off of this list, you should be good. There are other brands that are good quality too, but each of these brands has something that helps it to really stand out. These aren't put in any particular order.
Alien Workshop is a Dayton, Ohio based company, established by Chris Carter, Neil Blender and Mike Hill in 1990. They have gone through several ownership changes, including a period of being owned and operated by Burton Snowboards, but have persevered and become one of the top skateboard brands today. Alien Workshop has faced several turbulent challenges with varying outcomes, however they have remained dedicated to providing a high quality, yet also affordable boards. We like Alien Workshop for their innovative designs and conscience effort to make a great board, that many can afford. Their high quality boards has allowed them to become one of the best rated skateboard brands today.
The ENJOI line of skateboards is made to professional standards, which means that not only are you getting a durable ride, but you’ll also get a skateboard made to handle a lot of situations. You can ride this board on the street, at the skate park, on trails, and more. These decks are made with a very consistent method that is ideal for trick riding, especially.

Sizing plays an important role in the performance of any deck. A large majority range in size from 7.75" to 8.5" in width. These will provide a great platform for shredding any obstacle and will excel in street and skatepark environments alike. For those who prefer a smaller board, decks are offered down to 7.5" in width- benefiting people with smaller feet or the technical skater. Conversely, those looking for a wider board will enjoy our selection ranging up to 8.9" wide. Larger decks will accommodate those with very large feet, as well as offer an amazing experience for cruising and shredding large ramps and transitions.


Manufacturers started to experiment with more exotic composites and metals, like fiberglass and aluminium, but the common skateboards were made of maple plywood. The skateboarders took advantage of the improved handling of their skateboards and started inventing new tricks. Skateboarders, most notably Ty Page, Bruce Logan, Bobby Piercy, Kevin Reed, and the Z-Boys started to skate the vertical walls of swimming pools that were left empty in the 1976 California drought. This started the "vert" trend in skateboarding. With increased control, vert skaters could skate faster and perform more dangerous tricks, such as slash grinds and frontside/backside airs. This caused liability concerns and increased insurance costs to skatepark owners, and the development (first by Norcon, then more successfully by Rector) of improved knee pads that had a hard sliding cap and strong strapping proved to be too-little-too-late. During this era, the "freestyle" movement in skateboarding began to splinter off and develop into a much more specialized discipline, characterized by the development of a wide assortment of flat-ground tricks.
Severe injuries are relatively rare.[103] Commonly, a skateboarder who falls suffers from scrapes, cuts, bruises, and sprains.[103] Among injuries reported to a hospital, about half involve broken bones, usually the long bones in the leg or arm.[102] One-third of skateboarders with reported injuries are very new to the sport, having started skating within one week of the injury.[102] Although less common, involving 3.5–9 percent of reported injuries, traumatic head injuries and death are possible severe outcomes.[102]
The skateboard has a solid and stiff mini-deck, which is around 22 inches and constructed out of 100% plastic material. Such deck is very lightweight. It is only four pounds but you have an assurance that it can handle up to 198 lbs. of weight. You will also fall in love with the board as it comes in 23 graphics and colors, so picking a favorite is much easier.
Somehow, in the great effort to fight societal conformity, skateboarding always manages to create its own conformity. Trends in styles of skating and fashion come and go. A brand gets hot for a year or two because it's on trend, then it fades to make way for the next thing. Welcome Skateboards doesn't give a fuck about all that. Yes, they are a little weird. The graphics are vaguely Illuminati, and they can't seem to make a normal shaped deck, but that's just Welcome doing its own thing, and who wouldn't welcome that?
Fox and Deacon re-branded Deathbox in 1991 as Flip skateboards and announced the four man team as consisting of Geoff Rowley, Rune Glifberg, Andy Scott and Tom Penny. After nearly being put out of business when a flood destroyed much of their stock, Fox, Deacon and the four team riders began to plan their move from the UK to Huntington Beach, California in order for the brand to grow further.

There are actually several types of skateboards but the most common ones are the longboard, cruiser, and carve skateboards. A longboard is usually at least 33 inches. It is a great mode of transportation and works well for cruising around. The cruiser also works well as a mode of transportation but many consider it more beneficial as it has a shorter skateboard, which promotes ease in transporting around.


^ Jump up to: a b Costello, Becca (November 10, 2005). "Skateboarding is not a sport: Skateboarding the Sacramento streets takes skill, balance and nerve. Just don't call it a sport". Sacramento News & Review. Retrieved December 10, 2012. Despite stickers, posters and T-shirts stating the contrary, it turns out that skateboarding is, in fact, a crime. “In the downtown district, you can skateboard as transportation,” Rafter explained. “Anything other than all four wheels on the ground and getting to where you’re going, they have a problem with.”
Our only issue with Penny skateboards is that they are sold without grip tape. Though not necessary, it can make the ride a lot safer with grip tape. All in all, Penny is one of the top skateboard brands out there. Let us now look at a succinct brand scorecard of Penny Skateboards and see how it scores in various factors that we have considered while ranking the best skateboard brands.
Read on for our complete skateboard buyers guide where you can find things to consider when buying a beginner board, beginner skateboards for adults, ABEC ratings, Sizing Chart, and more about these epic extreme sports. Looking to go electric? Check our our review of the top electric skateboards! You could also try these top-rated electric longboards.
The promo was followed in late 2012 by another Polar Skate Co. Promo – No complies & wallrides & shuvits again filmed in and around Malmo, Sweden as well as Copenhagen, Denmark, New York and London, featuring skaters who appeared in the original promo, plus new addition and former Uk-born Blueprint skater Jerome Campbell and New York based Aaron Herrington who would go on to turn pro for Polar.
Since its inception in 1990, Alien Workshop has gone through a number of changes of ownership, first being bought by Burton Snowboards in February 2008, then purchased from Burton by original Alien Workshop rider and reality TV show star Rob Dyrdek in January 2012. Following Dyrdek’s purchase of the brand and its umbrella company DNA Distribution, (also incorporating Habitat skateboards, Habitat footwear and Reflex bearings), an announcement was made in October of 2013 that Dyrdek would remain as a minority shareholder of DNA Dist, with the majority of shares purchased by Pacific Vector Holdings, (also owners of No Fear clothing and Gatorz sunglasses).
×