Baker’s first company video proper ‘Baker 2G‘, featuring the original team of Mike Maldonado, Jeff Lenoce, Andrew Reynolds, Jeff Lenoce, Erik Ellington, Alex “Trainwreck” Gall, Knox Godoy, Bryan Herman, Terry Kennedy, Evan Hernandez, Jim Greco and Dustin Dollin was released in 2000, still featuring the distinctive elephant logo created by former Reynolds’ associate Jay Strickland, who went on to start up Bootleg skateboards.
The average width of decks available in skateboards is eight inches, however; there are many different varieties available as well. A wider deck provides you better balance as compared to slimmer kinds but it does not allow you to perform skateboard tricks. Decks come in a variety of materials that include wood, fiberglass or carbon. Considering the price, plastic decks come cheaper, but if we will consider quality then other options though more expensive will prove worthwhile.
Destructo has some fancy skateboarding trucks. The Destructo raw series skate trucks come in low, medium and high designs and look oddly skinny. The Limited and Pro series trucks just look awesome, with simple pro signatures on the front and great color schemes. That's not to mention Destructo's "Rail Killer" series - these light trucks have extended baseplates to reduce wheelbite, and come in some incredible color schemes (including one using 24 karat gold!).
There are three types of skateboards: classic, retro, and snake. Classic boards are the most common and what you generally find when you go shopping. Retro boards are longer and have larger wheels. They are great for skating long distances but inferior to classic boards for doing tricks. A snake board is not appropriate for kids since it requires intensive balance and has only one wheel.
Real’s video output continued with Kicked out of Everywhere (1999), Real to Reel (2001) and Seeing Double (2002). Following these full-length releases Real adopted a different approach to video making with a number of shorter tour-based and remix video releases which chimed with the shorter attention spans of the Internet generation – these include titles such as Real ‘Remix Project V1.1 (2007) and Real ‘From the Vaults V.1 (2007).
Now you need to look at the wheels of your skateboard. There are dozens of different sizes, materials, shapes, and features of skateboard wheels, and it can get confusing for beginners. The most common type of wheel is a hard plastic wheel, and for beginners, you’ll usually see a “90a” level wheel. Professional skaters often choose even harder wheels, up to a 100a, because it gives them more “pop” for tricks. But somewhere between a 90a and a 97a is usually best for beginners.

7.12"7.25"7.3"7.5"7.56"7.62"7.7"7.75"7.8"7.81"7.87"7.875"7.88"7.9"8"8.02"8.06"8.1"8.12"8.125"8.13"8.18"8.19"8.2"8.25"8.27"8.28"8.28"8.3"8.31"8.32"8.35"8.37"8.375"8.38"8.4"8.44"8.45"8.47"8.5"8.55"8.6"8.62"8.63"8.67"8.68"8.7"8.75"8.8"8.87"8.88"8.9"8.948.989"9.05"9.1"9.12"9.13"9.16"9.18"9.2"9.25"9.265"9.3"9.31"9.32"9.37"9.375"9.38"9.4"9.42"9.5"9.56"9.57"9.6"9.62"9.625"9.739.75"9.78"9.8"9.81"9.849.85"9.87"9.875"9.89"9.9"9.97"9.9810"10.1"10.2"10.25"10.34"10.37"10.5"11.2"11.75"
With the evolution of skateparks and ramp skating, the skateboard began to change. Early skate tricks had consisted mainly of two-dimensional freestyle manoeuvres like riding on only two wheels ("wheelie" or "manual"), spinning only on the back wheels (a "pivot"), high jumping over a bar and landing on the board again, also known as a "hippie jump", long jumping from one board to another, (often over small barrels or fearless teenagers), or slalom. Another popular trick was the Bertlemann slide, named after Larry Bertelemann's surfing manoeuvres.

If you want to do cruising and street style on the same board then you probably want a large board and larger wheels, as many have already commented. I think that an 8 inch board with at least 56 mm wheels will be best. I think that you should find a local shop to support and to talk to about gear. I would advise getting a shop deck, with Independent trucks (at the correct width for your board, which is one detail that a local shop should be able to help with) Bones street tech formula wheels (I like profiles 1 and, I think 5), and Bones Reds bearings (not super reds, super reds are not super).
Skateboards, along with other small-wheeled transportation such as in-line skates and scooters, suffer a safety problem: riders may easily be thrown from small cracks and outcroppings in pavement, especially where the cracks run across the direction of travel. Hitting such an irregularity is the major cause of falls and injuries.[102] The risk may be reduced at higher travel speeds.
A skateboard consists of a deck, trucks, wheels, bearings, hardware, and griptape. All parts come in a variety of sizes, graphics, colors, and signature pro series. The deck is the essential part of any skateboard. The deck ranges generally from 7.5" to 8.5". Skaters choose their board size for many reasons, but the basic deciding factor comes down to style of skating and foot size. Transition skaters usually ride a wider deck, while street skaters tend to go with a smaller deck. Skate brands such as Girl, enjoi, and Welcome offer a wide range of boards in regards to sizes and graphics. Skateboard trucks come in either a high or low setting, and also in a range of widths. The main factors in a truck, are how well they turn, and how well they grind. Independent, Venture, and Thunder, are truck brands that are well known for their turning and grinding capabilities. The skate hardware is generally either Phillips head or Allen key bolts. The skateboard wheels range from 50mm to 60mm. Some brands offer smaller and larger sizes, but 50-60mm is the general range. Like the deck sizes, wheel sizes depend on the skater's choice of terrain: Transition skaters tend to ride bigger wheels, while street skaters usually go with smaller wheels. Bones, Spitfire, Ricta, and Wayward wheel companies all make wheels for any terrain, whether you're a street shredder or a park burner. Skate bearings follow the ABEC rating system, which includes grades 1, 3, 5, 7, and 9. Bones, Bronson, and Andale are some of the top bearing brands in the skate market. CCS proudly carries all these brands, and many more.

The main feature of this longboard is its attractiveness. The color of the board is very vivid and pleasing. Also, the smoothness of the longboard is so much striking. Another unique thing that you will find with this longboard is its wheel bite is zero percent. If you want to attract the attention of the people with your longboard while spending reasonable money, this longboard is the best choice for you. Amazingly, even after one or two years, you will not find any crack on the board.
As the oldest brand on this list, Santa Cruz rightly holds the distinction of being the oldest skateboard brand in the industry and thus, the brand which effectively created the modern skateboard brand as we know it today. Founded as part of NHS Inc. a Santa Cruz based skateboard distribution company over 40 year ago, Santa Cruz as a brand has played a large part in every era of skateboarding history since its inception.
7.12"7.25"7.3"7.5"7.56"7.62"7.7"7.75"7.8"7.81"7.87"7.875"7.88"7.9"8"8.02"8.06"8.1"8.12"8.125"8.13"8.18"8.19"8.2"8.25"8.27"8.28"8.28"8.3"8.31"8.32"8.35"8.37"8.375"8.38"8.4"8.44"8.45"8.47"8.5"8.55"8.6"8.62"8.63"8.67"8.68"8.7"8.75"8.8"8.87"8.88"8.9"8.948.989"9.05"9.1"9.12"9.13"9.16"9.18"9.2"9.25"9.265"9.3"9.31"9.32"9.37"9.375"9.38"9.4"9.42"9.5"9.56"9.57"9.6"9.62"9.625"9.739.75"9.78"9.8"9.81"9.849.85"9.87"9.875"9.89"9.9"9.97"9.9810"10.1"10.2"10.25"10.34"10.37"10.5"11.2"11.75"
The wheelbase of a skateboard deck is the distance between the centers of the inner most truck mounting holes. This distance ranges between 13.5 to 16 inches and is generally proportional to the deck length on standard popsicle decks. Some specially shaped boards and cruiser decks have differing length/wheelbase ratios. Wheelbase can impact stability and turning radius, but the effect is often subtle and not a major concern for a beginner.

Without good grip tape, skaters have a tough time staying on top of their board. The main complaints about poor grip tape tend to be that it was never very grippy or lost its grip really quickly. Once again, we recommend trusting in name brands with years of experience supporting skateboarders. Unfortunately, if you are buying a pre-made complete skateboard, you probably won't have access to the brand name of the grip. 
The best thing to do when getting a new board is to go to your local skate shop and talk to the people there -- they are usually very helpful. The guys at the shop will be able to tell you what board will be good for your skating needs. Keep in mind different people have different opinions on board brands. People say Plan B's are good, but I know others that say it's not. Some like DGK boards, some don't. Just test the board out and see how it suits you. You may want to double check this if you are being extremely careful with your selection.
The laws for skateboarding helmets vary from state to state. Many states require that skaters wear a helmet under a certain age, and some states like California make all skaters under 18 wear a CPSC Certified helmet at all times. CSPC skateboard helmets usually have an EPS protective liner that meets the safety standards for skateboarding. Make sure you check your state's regulations before ordering.
Polar’s inaugural video release, The Polar Skate Co. Promo – Wallride Oh Yeah Oh Yeah Oh Yeah (2012) with the tagline ‘Inspire others to inspire themselves’ featuring Pontus, fellow Swedes Oskar Rozenberg and Davd Stenstrom, Polish rider Michal Juras, Dane Hjalte Halberg, Tjark Thielker and original rider and Polar artistic contributor Jakke Ovgren.
A Maplewood board embellished with polyurethane coating can hardly describe the liveliness of the game combined with the names of professional skateboarding brands. Considering, skating as mere sports equipment can divulge you into a wrong dimension. We believe whether you choose among the professional and impulsive skateboard shoe brands or best skateboard decks brands, commitment towards the sport can make you rule the ambience.

The wheels of your skateboard can greatly affect your ride in numerous ways, such as the speed, your ability to take control of the skateboard’s movements, and what you feel while riding the board. The good news is that they come in various sizes, levels of durability, and colors, allowing you to pick one that suits your skateboard preference and style.
“As far as the actual look of the vast majority of contemporary graphics goes, I’d say that it feels to me as if something has been lost. It’s down to what you can do with modern heat transfer printing techniques – you can literally just take a photograph from the Internet and print it identically straight onto a skateboard. Speaking personally, there’s very little to challenge you there: either from the point of view of creating graphics, or from the consumer’s perspective. Whereas back when screen-printing was the norm, every time a graphic was produced the artist was physically cutting the key line out by hand. The key line is the final black line that forms the outline of whatever it is that you’re printing and ties in all the other colours together. You can see this in the early Sean Cliver graphics for example, where it’s clear that he has hand cut the key lines as precisely as he was able to, but looked at from today’s perspective they’re not perfectly precise, which is what gives Cliver’s earliest stuff its specific look in my opinion.”

After riding Powell decks for many years, I was given the opportunity by Michael Furukawa at Skate One Corp. to create my own board brand. This was an honor but I needed a co-pilot for this mission to happen. I asked Mimi Knoop if she would join forces with me and this was the beginning of an all girls skate brand that we called hoopla skateboards.
What began life as a screen-printing business back in 2001 has organically morphed into one of the UK’s most celebrated low-key bedroom brands. After completing a screen-printing and fine arts degree Stuart Smith set up Lovenskate to offer bespoke screen printing services to the skateboard industry and beyond from inside his parents garage. Over time, Lovenskate grew and formally metamorphosed into a skateboard brand back in 2001.

First, you’ll need to consider the size of the skateboard. Most skateboards are about eight inches wide, but if you have very large feet, or you really want to feel very stable as you learn, consider going with something wider. Remember that the wider you go, the harder it is to learn tricks and to go around curves. If you want to rotate your board mid-air during a jump, you need a board that is no wider than eight inches.

Hardware won’t have an effect on your skating. Standard 7/8 - 1 inch hardware will work for most skateboards. However, if you use riser pads, be sure that you have long enough hardware to go all the way through the deck, trucks and riser pad. If you're unsure what length of hardware you need, give one of our experts a call at 888.450.5060 and we'll be stoked to help you out.


The skateboard is directional, so if you’re skating switch the tail end will be forward, though, it makes for an easy switch heel flip. The deck itself is plastic. The skateboard dimensions are 3x6x22 inches. The wheels are 59MM urethane custom Skatro brand wheels. The bearings are ABEC 7 Skatro bearings. The trucks are 3 inches aluminum trucks. The board itself is only a light 4.7lbs and comes in one color.
Grip tape adds additional assurance for a rider's feet. It is made from a sheet of colored paper or fabric with adhesive on one side and a fine, sand paper surface on the other. Applied to the top surface of a skateboard, grip tape gives a person's feet an improved grip while maintaining stability for performing tricks. Skateboard trucks connect both the wheels and ball bearings to the deck and are directly attached to the deck themselves. They are usually constructed from aluminum alloy. The wheels are mounted to their axles via steel bearings. The wheels are made from polyurethane and available in a range of different shapes and sizes to suit most any skill level.

Girl Skateboards, with its distinct “women’s bathroom” logo, is a brand distributed by Crailtap and founded in 1993 mainly by professional skateboarders Mike Carroll and Rick Howard and was created to give pro skateboarders a future. A “Girl” deck is made of seven-ply maple, which is strong and resistant. Decks can be customized in a wide variety of graphics or can feature the “Girl” logo. For those who don’t want to customize, complete skateboards are available that include the deck, wheels, trucks and bearings. Clothing, featuring the Girl logo, are available in a wide variety of styles. Not only does Girl distribute skateboards, but they also make films, videos and more. The Girl team consists of Sean Malto, Brandon Biebel, Andrew Brophy, Mike Mo Capaldi, Cory Kennedy, Rick McCrank, Jeron Wilson, Mike Carroll, Rick Howard, Tyler Pacheco, and Simon Bannerot.
Skateboarder owned and operated is Magenta's mantra. “No middle-man or business-person involved,” it says on the brand's site, so you know what you're getting from this French brand is pure, uncut skate to the core. All of the art direction and graphics are done by co-founder and team rider Soy Panday, who has developed a unique artistic perspective for Magenta. You'll likely to see numerous skaters kicking around on Magenta boards in NYC these days, and with a strong offering of T-shirts, coaches jackets, caps, and a funny boxer short collab with Lousy Livin, there is plenty to appreciate.
Next, you’ll need to look at the deck material. Decks are typically wooden or plastic, but they may also be made of materials like carbon and fiberglass. Plastic boards, like the pennyboard, are more affordable, and still very durable, but many adult riders find that they can look a bit like a child’s toy rather than a “real” skateboard. Wood is the most popular choice for most skateboards, although if you want to invest in the pricier fiberglass or carbon options, you’ll get a very good quality deck for your money.
First, you’ll need to consider the size of the skateboard. Most skateboards are about eight inches wide, but if you have very large feet, or you really want to feel very stable as you learn, consider going with something wider. Remember that the wider you go, the harder it is to learn tricks and to go around curves. If you want to rotate your board mid-air during a jump, you need a board that is no wider than eight inches.
Without good grip tape, skaters have a tough time staying on top of their board. The main complaints about poor grip tape tend to be that it was never very grippy or lost its grip really quickly. Once again, we recommend trusting in name brands with years of experience supporting skateboarders. Unfortunately, if you are buying a pre-made complete skateboard, you probably won't have access to the brand name of the grip. 
×