As the name implies, pro skateboard decks are decks made by well-known skateboard brands that typically feature graphics or logos related to a specific team rider.  Usually, pro decks are more expensive than team decks of the brand and much more expensive than blank decks.  The increased cost goes to the pro skater and it’s a way for the buyer to support their favorite skaters and brands.  Pro street decks are almost always Canadian maple, besides a few carbon fiber exceptions and they are the most commonly purchased decks see in skateparks and on the streets worldwide.

Trick wise, you can perform many different tricks. The price is well worth it because of the lightweight nature and solid design of the skateboard brand. The trucks and bearings are custom made by the company so there is no room for error as the quality is promised to be upheld by the company. Also, the package itself comes with a mini T-tool which is great for on the spot replacement of wheels, adjusting the bearings, and also interchanging the trucks if need be.
The board also boasts of its reasonably small size and lightweight nature, making it easy to control and ride. In addition, carrying it wherever you want to go is also much easier because of its lightness. It is flexible enough that it can accommodate the needs of different kinds of users, including cruisers, travelers, beginners, expert riders, and kids.
Freestyle skating remained healthy throughout this period, with pioneers such as Rodney Mullen inventing many of the basic tricks that would become the foundation of modern street skating, such as the "Impossible" and the "kickflip". The influence that freestyle exerted upon street skating became apparent during the mid-1980s; however, street skating was still performed on wide vert boards with short noses, slide rails, and large soft wheels. In response to the tensions created by this confluence of skateboarding "genres", a rapid evolution occurred in the late 1980s to accommodate the street skater. Since few skateparks were available to skaters at this time, street skating pushed skaters to seek out shopping centers and public and private property as their "spot" to skate. (Public opposition, in which businesses, governments, and property owners have banned skateboarding on properties under their jurisdiction or ownership, would progressively intensify over the following decades.)[40][41] By 1992, only a small fraction of skateboarders continuing to take part in a highly technical version of street skating, combined with the decline of vert skating, produced a sport that lacked the mainstream appeal to attract new skaters.
Moving on to our favorite pick from the Plan B series, Plan B Skateboard Complete Felipe Victory 7.6″ Tensor Assembled, suitable for all kinds of riders, but is an ideal skateboard for intermediate skateboard riders. The deck is made from 100% North American maple and measures 7,6 inches. Its wheels are 52mm TGM wheels which means it is excellent for both street and park skating. We also love its lightweight trucks and heavy-duty aluminium with grade 8 steel kingpins and axles plus the bushings (USA made) and pivot cups. The bearings are rated 5 on the ABEC scale.

When you’re searching for one of the best decks on the market, it’s important to not go overboard. You don’t need one that is made from the rarest wood or that has the most unique design. The best boards may be the ones that balance cost, design, and quality. After all, with healthy use, you’ll eventually have to replace your deck anyway. You want the one that will give you the most functionality and enjoyment while you use it.
Launched in 1991 by professional skateboarder Mike Ternasky who was killed in a car accident in 1994, Plan B Skateboards was renewed in 2005 by professional skateboarders Danny Way and Colin McKay. The top Skateboards brand, recognized by its unique logo, offers customization, but it also produces skateboards that come already assembled and ready for immediate action with everything a skateboarder needs including the deck, wheels, trucks, and bearings. The decks are made with a durable and thick seven-ply maple. They are also designed for you to make them uniquely yours with cool graphics that reveal your personality. In addition to the decks, Plan B also produces wheels, toolkits, and the kind of hip clothing that every skateboarder wants to be seen wearing. In addition to Way and McKay, the Plan B team consists of pro skateboarders PJ Ladd, Chris Cole, Pat Duffy, Ryan Sheckler, Torey Pudwill, Leticia Bufoni, Chris Joslin, Felipe Gustavo and Sean Sheffey.
^ Jump up to: a b c d e f "Skateboarding" (PDF). Pennsylvania Avenue National Historic Site Management Plan: Visitor Information, Education and Enjoyment. Washington, D.C.: National Mall and Memorial Parks: National Park Service: United States Department of the Interior. April 2014. pp. 24–25. Archived from the original (PDF) on March 4, 2017. Retrieved March 29, 2017. Skateboarding damages stonework, walls, steps, and sculpture in some areas and presents a persistent law enforcement and management challenge. Damaged areas include stone facing on memorials, benches, and other surfaces. Moreover, popular websites advertise the attractiveness of these areas for skateboarding, which indicates the large scope of this challenge. .... Actions: .... In park areas replace and maintain “No Skateboarding” signs that have been vandalized.
Navigator is a newer truck company and may be hard to find (the Navigator site has a store locator that should help). I've listed them here because they have some unique features on their trucks. For example, they have a special addition beneath the baseplate that holds the kingpin in place so bushings can be replaced without taking the trucks off of the skateboard. Also, Navigator is the only truck company that pins their axles, so they can guarantee their axles will NEVER slip! The Navigator site lists many other features - take a look and see what you think.
Blank decks have no graphic on them and are typically priced very reasonably.  Blank decks are usually colored a solid color or may even be made of unpainted wood.  Historically blank decks have gotten a bad reputation for poor quality, however, there are a few brands of blanks today that are very similar in quality to pro boards and much more affordable.  The downside to buying a blank complete with all blank parts is the lack of style and customization when compared to a pro deck.  Also, blank skateboards may vary in quality from batch to batch, so it may be hard to find the same blank skateboard if you want to buy another one.  Overall, blank skateboards can be a solid option if you have a tight budget and the person you are buying for doesn’t really care about the logo and brand.

No longer number one but still quite close: EMillion SkateboArts land on the second place this year, which is more than respectable regarding the competition. The Bavarian brand stands for quality, artistic designs and a motivated team, which is also represented by skatedeluxe team rider Ben Dillinger. EMillion decks are available from 49.99 € | 40.00 GBP!
The wheels are also impressive. Unlike some other skateboards that have wheels that are quite stiff, causing them to feel like they will lock up when you ride on them, the wheels in this complete skateboard for beginners are smooth and comfortable. These are also easily controllable, so rest assured that they offer a smooth and friction-free glide.
See, not all boards are actually bidirectional. Most have a thick tail and a small nose but not this board. So if you’re a switch skater then this board brand is perfect for you. The urethane wheels are designed for the high stress environments and provide the top speed available. The deck tape provides the perfect grip even for those of us with older shoes that are essentially smooth on the bottom.
It can be frustrating to choose the top skateboard brand for your needs with so many brands bubbling up in the market. How do you separate the top brands from the average ones? How does a customer know which skateboard brand will give them their money’s worth? Just to help you guys answer all those questions at one place, we came up the easiest solution.

Jump up ^ Williamson, Elizabeth (October 11, 2013). "Skateboarders See a (Kick) Flip Side to the Government Closing: With Washington Plazas Empty and Patrols Down, a Banned Sport Is Suddenly On" (video). The Wall Street Journal, U.S. Edition. Retrieved March 30, 2017. One positive thing about the gov't shutdown – spots at gov't buildings are now skateable – Darren Harper, Pro Skateboarder, via Facebook.
The brand based in Vancouver provides skateboards featured with construction of fiberglass and bamboo, Rayne longboards assure the best skating experience you can imagine. Decks made by Rayne has the ultimate crispy flow produced from the highest quality bamboo. The boards come with unique designs that standing out with the cool personality that beats other competitors in the market.
“I just felt like it was a window of opportunity within my own career. I might be one of those lucky few who’d be able to do that, start my own brand and move on. That window of opportunity only upholds for so long in skateboarding before you miss your prime, so I’d be kicking myself in the ass five years from now looking back and saying ‘how come I didn’t capitalise on that? Here I am, an older skater and not in my prime anymore and I have nothing still connecting me to skateboarding’”
I'm 31 years old and just started skateboarding for the first time I bought a creature because of the p2 kevlar veneer they throw in before the final veneer goes on plus the nose is a little less tapered then the tail making it slightly bigger but the pop I get or the spring is nutty you can feel the board torgue up power in the tail just before you launch very happy with my puchase salvatore rochester ny
It was a slow start for 3D, who had Alex Olson bail on them when they first started out before they could even get their first run of boards inside of shops, leaving the company at just two riders: Brian Anderson and Austyn Gillette. Now, due at least partially in part to Brian Anderson’s solidified status as a skateboarding legend, 3D has taken off and become an established brand that’s not taking itself too seriously, but still putting on for skateboarding. 3Ds first video offering, featuring amateur rider Tom Karangolov in a dreamy pink colorcast world, has even showed that they’re looking to shake things up in the stale footage side of skateboarding.
“I think it’s just also like, people want to have fun. If you watch say those types of Street League type of skateboarders, who are super amazing skateboarders that can push these crazy tricks down rails and stairs, like switch tre down fifteen stairs or whatever trick they do — it’s amazing to see that level of skating, but if you are an average Joe living in a small town you’re just like, “I’m never going to be able to kickflip back noseblunt twenty-stair rails”. That’s always the biggest trick. If you ask me it’s like, “What videos do you really enjoy?” The videos that you can some how relate to. Like, “Hey, I could actually do some of these tricks.” You connect to it and you feel like you can picture yourself being a part of the whole thing. When people put out these amazing super stunt skateboarding videos, pushing it to the furthest level possible, that’s rad in one sense, but to me personally as a kid I could never in my wildest dreams believe that I could do that too. I respect it. I understand it. But does it make me want to go skate? No.”

Typically when looking at different completes you will see size dimensions in the format of ~7-8 x 31-34″.  This measurement is referring to the width and length of the skateboard deck.  Typically all other parts are relatively standard and the deck size is the main thing to look for.  Standard skateboard widths for beginners are between 7.5-8.25 with smaller boards being better for younger and smaller guys.  You don’t really have to worry about length much as long as it’s shaped regularly.  You may hear about the concave of the deck or a special type of board construction, but for the most part, it will not matter much to a beginner.  If you have no idea what size would be best you will never go wrong with a 7.5 or 7.75.


Aside from keeping the more fashion-oriented side of skateboarding placated with ultrasoft crewnecks and clean 6 panel caps, Dime keeps the side of skating focused on actual footage and hijinks fed through their Instagram and Snapchat accounts (@dimemtl), where they post their day-to-day in Montreal doing what skateboarders do best: having fun with their friends.
You should also look for the type of skateboard wheels that you will be getting with your skateboard. Soft wheels are great for cruising around uneven surfaces, while harder wheels are better for skateboard tricks and hard falls, which is vital for various skateboarding styles. The key thing to remember is the smaller wheels are slower, and bigger wheels are faster.
See, not all boards are actually bidirectional. Most have a thick tail and a small nose but not this board. So if you’re a switch skater then this board brand is perfect for you. The urethane wheels are designed for the high stress environments and provide the top speed available. The deck tape provides the perfect grip even for those of us with older shoes that are essentially smooth on the bottom.
The main feature of this longboard is its attractiveness. The color of the board is very vivid and pleasing. Also, the smoothness of the longboard is so much striking. Another unique thing that you will find with this longboard is its wheel bite is zero percent. If you want to attract the attention of the people with your longboard while spending reasonable money, this longboard is the best choice for you. Amazingly, even after one or two years, you will not find any crack on the board.
Founded by the original technical street skaters Daewon Song and Rodney Mullen, Almost Skateboards always pushes the envelope with fun, artistic cartoon graphics paired with high quality materials.  Almost was one of the first brands to implement carbon fiber layers to their decks in the “Impact” deck line to increase the deck’s life and better maintain its shape.
This is an interesting option because it is basically a hybrid between a blank and pro skateboard deck.  It’s like a pro board in that is has a “brand” and logo, but the cost is similar to blanks and they don’t sponsor the same quantity and caliber of professional skaters that other pro brands do.  While the logo is really cool and the rest of the parts seem to be high quality, you may not get the same brand recognition with Punisher as you would with other brands like Element or Toy Machine.  This deck is also 7.5″ which makes it a great choice for a younger beginner.  This is the perfect beginner skateboard for someone who doesn’t really care about the brand name, but still wants the style and performance of an above average professional skateboard.
Jump up ^ Williamson, Elizabeth (October 11, 2013). "Skateboarders See a (Kick) Flip Side to the Government Closing: With Washington Plazas Empty and Patrols Down, a Banned Sport Is Suddenly On" (video). The Wall Street Journal, U.S. Edition. Retrieved March 30, 2017. One positive thing about the gov't shutdown – spots at gov't buildings are now skateable – Darren Harper, Pro Skateboarder, via Facebook.
Our personal favorite is the Penny Australia Classic Complete Skateboard and trust me when I tell you this, it is the best skateboard for beginners. Hands down, we love how it is amazing to look at, very portable, excellent speed and has the greatest parts like hard wheels, 7 ABEC bearings and high tensile bolts. We love this board so much that it forms part of our best skateboards 2018 list as well.
Founder Richard Novak is also widely credited as creating the skateboard industry as we know it today by establishing skateboarding as a separate culture and business by wrestling the sport away from the control of the roller-skating industry in the early 1970’s and promoting it through sponsoring events, supporting the nascent skateboard magazine culture, pioneering technologies within skateboard, truck and wheel construction and establishing the edgy cultural identity of skateboarding from the very beginning.
A skateboard is fundamentally a sum of its parts. If you want a good skateboard, you’ll want each component to be high quality. We’ll take a look at each part of a skateboard and talk about what quality means for the that component. We’ll try to give tips on how to spot a high or low quality implementation of that component and then we’ll share how SkateXS Skateboards measure up.  
The first thing to consider is what kind of skateboarding you want to do. Do you want to skate your local skate park and learn tricks? Do you want something for commuting across town or campus? Or, would you enjoy charging down hills at high speeds? Take a look at the options below and note which features work well for the type of skating you want to do.
With distinctive graphics, often touching upon controversial issues such as racism with American society such as the infamous Jim Thiebaud ‘Lynch the KKK’ graphic designed by Natas Kaupas and Kevin Ancell, and classic Jeff Klindt graphics such as the James Kelch ‘James’ board, which was recently re-released, Real’s aesthetic has always been instantly recognisable.
Real Skateboards are also notable for the brand’s deep involvement in raising awareness and funds for charitable concerns related to the skateboard community across the globe with the brand supporting everything from DIY skatepark builds, to releasing bespoke Real boards for fallen members of the skateboarding community including releasing a board in memory of UK skate shop owner and stalwart of the British skate scene Steven ‘Bingo’ Binks back in 2011.
If you are completely new to skateboarding, consider taking a minute to read through the Skateboard Decks Section in our Buyer’s Guide will be helpful, but a good rule of thumb is: the bigger your feet, the wider your board should be. If you wear a size 9 and up, you can’t go wrong with buying an 8” board. Narrow boards are easier to flip while wider boards are more stable, but there are no hard and fast rules to skateboarding. The only way to really find out what you like is by trying new shapes, sizes, and brands. Brands like Welcome, Baker, Chocolate, Deathwish, and Element all have a wide variety of sizes, shapes, and graphics.
×