Without good grip tape, skaters have a tough time staying on top of their board. The main complaints about poor grip tape tend to be that it was never very grippy or lost its grip really quickly. Once again, we recommend trusting in name brands with years of experience supporting skateboarders. Unfortunately, if you are buying a pre-made complete skateboard, you probably won't have access to the brand name of the grip.  

The board itself is actually very portable in the sense that it only weighs a modest four pounds. Which means you can jump on and off in any situation that may warrant you to walk or ride. The ABEC7 bearings are top quality bearings and of the highest class. Also accompanying all of these fine features comes the kick-tail end of the board. This is to ensure that maneuvering and tricks can be performed with this utmost of ease.
Skateboards have been gaining an increasing popularity since the end of the 1990s. Since then, it has been a common hobby and form of entertainment for many. However, due to the popularity of skateboards now, it can be hard to find a reliable and quality product. There are plenty of skateboards out there that will break easily when placed on harder gravel. That’s why we made this article, the list and the information sections, to help you choose the best product for you.
The Landwalker 22″ Complete Skateboard has a sturdy 7 layer Canadian maple deck. It’s best for downhill, U table and slider because of its enormous stability. This board is best for teens and adults. It comes with Abec 7″ Bearings, PU wheels, Black Grip Tape, and hardware. It measures 79 x 20 x 10 cm. This board is an awesome gift for Christmas or Halloween.
That Captain America-esque deck, though, is where the real magic happens. It uses Plan B’s Blk Ice tech, which means it’s lighter than your average board, stronger than standard 7-ply maple, and it’s built to slide and pop like no other without any need to add wax. This also makes it more consistent; no extra slippery or sticky spots, just a smooth ride.
It’s best to not go overboard with spending a lot of cash on your first skateboard. After all, it will take a lot of beating, and will surely be reduced to looking like a scratched plank of wood! Best skateboards to learn on include budget, beginner skateboards that offer you all the quality features a more expensive skateboard would, but at a lower expense. If you are new to skateboarding, it’s also recommended to get a skateboard with smaller wheels, since they go slower and are less intimidating!
Aside from keeping the more fashion-oriented side of skateboarding placated with ultrasoft crewnecks and clean 6 panel caps, Dime keeps the side of skating focused on actual footage and hijinks fed through their Instagram and Snapchat accounts (@dimemtl), where they post their day-to-day in Montreal doing what skateboarders do best: having fun with their friends.
So now that you have an idea of what size and shape board you like, it’s time to choose a brand. A popular size is an 8.5 skateboard deck. If you were looking for a size 8.5 skateboard deck, you could narrow the decks offered on CCS.com to fit in the 8.25 - 8.5 range. This will show you all the boards in that range, and significantly reduce the boards you have to look through. Now, if you don’t have a preference on board brands, find a graphic you like and you’re all set. If this is your first skateboard or are still learning about what wood and brands you prefer, we recommend checking out a CCS Skateboard. They give you a bang for your buck, that's for sure.
TIP: Extra width and short noses make old school boards more difficult to flip or lift off the ground, so they are not ideal for street skating. With some old school boards, the truck mounting holes are drilled to only fit certain trucks, so make note of the truck pattern before you buy the deck. If you’re not sure your trucks will fit, just give us a call and we’ll figure it out. Shop Old School Compatible Trucks
There were several artistic skateboarding pioneers that had an influence on the culture of skateboarding during the 1980s, that transformed skateboard-deck art like Jim Phillips, whose edgy comic-book style "Screaming Hand", not only became the main logo for Santa Cruz Skateboards, but eventually transcended into tattoos of the same image for thousands of people and vinyl collectible figurines over the years.[93][94][95] Artist Vernon Courtlandt Johnson is said to have used his artwork of skeletons and skulls, for Powell Peralta, during the same time that the music genres of punk rock and new wave music were beginning to mesh with the culture of skateboarding.[8][96][97] Some other notable skateboard artists that made contribrutions to the culture of skateboarding also include Andy Jenkins, Todd Bratrud, Neil Blender, Marc McKee, Tod Swank, Mark Gonzales, Lance Mountain, Natas Kaupas and Jim Evans.[98][99]
A skateboard consists of a deck, trucks, wheels, bearings, hardware, and griptape. All parts come in a variety of sizes, graphics, colors, and signature pro series. The deck is the essential part of any skateboard. The deck ranges generally from 7.5" to 8.5". Skaters choose their board size for many reasons, but the basic deciding factor comes down to style of skating and foot size. Transition skaters usually ride a wider deck, while street skaters tend to go with a smaller deck. Skate brands such as Girl, enjoi, and Welcome offer a wide range of boards in regards to sizes and graphics. Skateboard trucks come in either a high or low setting, and also in a range of widths. The main factors in a truck, are how well they turn, and how well they grind. Independent, Venture, and Thunder, are truck brands that are well known for their turning and grinding capabilities. The skate hardware is generally either Phillips head or Allen key bolts. The skateboard wheels range from 50mm to 60mm. Some brands offer smaller and larger sizes, but 50-60mm is the general range. Like the deck sizes, wheel sizes depend on the skater's choice of terrain: Transition skaters tend to ride bigger wheels, while street skaters usually go with smaller wheels. Bones, Spitfire, Ricta, and Wayward wheel companies all make wheels for any terrain, whether you're a street shredder or a park burner. Skate bearings follow the ABEC rating system, which includes grades 1, 3, 5, 7, and 9. Bones, Bronson, and Andale are some of the top bearing brands in the skate market. CCS proudly carries all these brands, and many more.
Prior to the mid-seventies many early skateboards were originally based upon the concept of “Sidewalk Surfing” and were tied to the surf culture, skateboards were surfboard like in appearance with little to no graphics located under the bottom of the skateboard-deck. Some of the early manufactured skateboards such as "Roller Derby", the "Duraflex Surfer" and the "Banana board" are characteristic. Some skateboards during that time were manufactured with company logo's or stickers across the top of the deck of the skateboard, as griptape was not initially used for construction. But as skateboarding progressed & evolved, and as artist began to design and add influence to the artwork of skateboards, designs and themes began to change.[92]

Using 12 years of experience in manufacturing skateboards, Penny Skateboards was created to offer the skateboarding community high performance and high quality plastic skateboards. The brand focuses on creating each Penny skateboard with attention to detail and with the best raw materials. Not only are they meant to look good, but are meant to work just as good if not better.
Skateboarding is one of the most popular alternative sports around the world, for kids and adults alike. But before you hop on a board and take off, it’s important to choose the right kind of board for you. Most beginners will simply grab the board that they like the looks of, and with the endless array of deck art and styles that exist, that kind of attitude can lead to choosing a board that isn’t right to learn on.

The Atom has also improved its position from 4th to 3rd in 2018. You can trust these Longboards. They are continuously improving their product quality and increasing communication with general and potential customers. Correspondingly, they provide an opportunity for customers to select from a wide range of style, color, design and price to the customers. If the improving rate becomes constant, it will quickly switch to the upper position immediately.


First off, it’s important to decide what you will be using your skateboard for and what you will be doing with it. That’s why it’s important to ask a few key questions: Are you going to be using it every day? Is it for a new hobby? Is it for competition practice? What surface will you be skating on? Will you be partaking in park skating, or street skating?
The skateboard industry is as colorful and competitive as the sport itself.  It’s no surprise that the top skateboard brands all take on that daring, free expression and edgy creativity that is quintessential to the skateboarding community.  But it’s not all fun and games — it takes a lot more than producing wooden decks with dope graphics to make it to the top.  It takes hands-on dedication and genuine passion for the sport.
Another great pro option, Element is definitely one of the top 3 brands in skateboarding.  This deck is also slightly slimmer than the Enjoi deck above so it would be an even better choice for someone with small feet or who is very young.  This board has an iconic look that will be recognized by most skaters, and it has the quality to last much longer than most other skateboards on the market.

Similar to sandpaper, grip tape, or “grip” as it’s commonly referred to, is applied to the top of your deck for traction. Grip gives you the friction you need to perform tricks such as ollies and kickflips. Not all grip tape is the same however. Each brand's products perform differently, so you may want to experiment with different brands to get a feel for what you prefer.


Graphically speaking, Welcome is very distinctive, with an emphasis on hand drawn imagery and references to esoteric and occult themes mixed with bright colourways. Welcome Skateboards also offer a detailed shape guide on their website, detailing the exact dimensions of all of their 38 custom shapes, which again differentiates their product from many of the skateboard brands on the market.
Many musicians, painters and designers have explored their potentials through skateboarding. When you skate, your inner talents come out in many ways. Painters paint their decks with artistic sceneries and musicians sing while they are deeply involved in cruising through the smooth roads. People with graphic designing and photography passion bring out their skills by taking an incredible picture while skateboarding and edit them beautifully. Skateboarding no doubt polishes your skills!

No longer number one but still quite close: EMillion SkateboArts land on the second place this year, which is more than respectable regarding the competition. The Bavarian brand stands for quality, artistic designs and a motivated team, which is also represented by skatedeluxe team rider Ben Dillinger. EMillion decks are available from 49.99 € | 40.00 GBP!

Skateboard decks width is probably one of the most important factors to consider when buying a deck.  Decks typically range from 7.25-8.5″.  7.5″,7.75″, and 8.0″ tend to be the standard widths if most decks and the general rule is that the bigger your feet are the wider the deck you should get.  Thinner decks are slightly easier to flip, however they are harder to land on due to the decreased surface area.  This is a tradeoff you have to consider, but the typical rule of thumb for younger guys is that you get wider decks the more advanced and larger you get.  Street skaters typically also like smaller decks as they are easier to navigate and carry around in crowded cities and areas.


The Wonnv Retro Mini Cruiser 22 inch Complete Skateboard is 22″ Light Up Clear Banana Skateboard.  It is complete with Light Up Board, Wheels, Metal Trucks, ABEC-7 Bearings, and High-Quality Bushings.  The set also includes 6″ Metal Trucks, High-Speed ABEC-7 Bearings, High-Quality Bushings, and Hardware.  It has a unique Textured Waffle Pattern on Deck and designed for Maximum Grip.  The Deck measures about 22 x 6 x 4″.  It has a 6″ Truck Axle and 3″ Truck Hanger.  It requires 2 AAA Batteries and is recommended for skaters who are 6 years old and Up.  It has a 5 rating on Amazon.
This skateboard is within the 22 inch category, (there are other categories according to size ranging from 22 inch to 36 inch longboards) and the Jet Black Lilac is our personal favorite. We love the twist of the color which is for people who want to keep it simple with just a dash of color. It also has some other amazing specifications like classic waffle top non-slip deck, 3-inch aluminum trucks with powder-coated finish and 59mm, 83A wheels for a smooth ride.
It’s not just standard deck sizes that are available for creating or replacing your board. You can just as easily get a great longboard deck to work on in your basement or garage. One of the best and best-reviewed options out there is the Loaded Boards Poke Longboard Skateboard Deck. This standard-design longboard deck has it all to help you make the ideal board. 
In the past decade, I have begun seeing the emergence of skate decks being totally or partially made from carbon fiber or other metal materials instead of solely wood.  These decks typically last longer than regular wooden decks and aren’t prone to chipping or breaking like most made from wood.  The drawback to these materials is that they tend to feel “stiffer” than traditional wooden decks and experienced skaters may feel they are heavier and harder to do tricks on.  Carbon fiber decks are also more expensive, but this additional cost may be worth it if you tend to break decks easily.  Some brands also offer warranties against breakage under normal conditions for carbon fiber decks if you are worried about breakage.
It's apt that Tribute has taken an umbrella as the company logo. In a city that rains as much as Portland, skaters don't have too much to be stoked about. But that has done nothing to deter one of the strongest skate scenes in the US, which has the notorious Burnside skatepark, awesome brands like Tribute, and local rippers like Brent Atchley at its core.
Grip tape adds additional assurance for a rider's feet. It is made from a sheet of colored paper or fabric with adhesive on one side and a fine, sand paper surface on the other. Applied to the top surface of a skateboard, grip tape gives a person's feet an improved grip while maintaining stability for performing tricks. Skateboard trucks connect both the wheels and ball bearings to the deck and are directly attached to the deck themselves. They are usually constructed from aluminum alloy. The wheels are mounted to their axles via steel bearings. The wheels are made from polyurethane and available in a range of different shapes and sizes to suit most any skill level.
Also called Standard Kingpin Trucks, these trucks will mount to any standard or cruiser deck. They are the most versatile type of trucks and can be used for any type of skateboarding. There are many brands and various features to consider, including truck height, weight and replaceable components. Trucks are easily adjustable and allow you to loosen or tighten the board's responsiveness. For more information on trucks, check out our Skateboard Trucks Guide.
There is one question that one or another might have had in mind before: What is the best skateboard deck brand? Unfortunately, we don’t have a satisfying answer. But we did our very best and moved mountains by coming up with a very complex formula that takes sold decks, brand shop visits, search queries and lots of other fripperies into consideration to display a list of your favourite skateboard brands of 2017.
Prior to the mid-seventies many early skateboards were originally based upon the concept of “Sidewalk Surfing” and were tied to the surf culture, skateboards were surfboard like in appearance with little to no graphics located under the bottom of the skateboard-deck. Some of the early manufactured skateboards such as "Roller Derby", the "Duraflex Surfer" and the "Banana board" are characteristic. Some skateboards during that time were manufactured with company logo's or stickers across the top of the deck of the skateboard, as griptape was not initially used for construction. But as skateboarding progressed & evolved, and as artist began to design and add influence to the artwork of skateboards, designs and themes began to change.[92]
As your skateshop, we know that the list of skateboard and streetwear brands on the current market seems to be endless. To make it easier for you, we have the best and most famous European and American skateboard and skatewear brands at the skatedeluxe skateshop. Besides the biggest and best companies in the world, we also have a selection of smaller and uprising companies in stock that are worthy to represent your lifestyle.
One European brand steady killing the game is France’s own Magenta. What Palace is for London, Magenta is for Paris, representing what it means to make do with skating in a place where you will literally get kicked out of everywhere just for riding on your board. With a recent collaboration with adidas, Magenta has shown they can turn their niche image into something with mass appeal, so long as the world will pay attention. Skateboarders already know the brand for their quick-footed style of skating and their unique illustration style, but they should know Magenta for their conscious effort to make sure we all are enjoying the pleasure and the freedom skateboarding brings.

Illegal skating includes jumping over cracks or obstacles on the sidewalk (rather than stopping, picking up one’s board and walking around the obstacle), turning, riding over certain public property and any stopping maneuver that could be considered a trick. A ticket for skateboarding is a traffic violation, but skaters are more commonly cited for vandalism or trespassing—misdemeanors that stay on a skater’s record and usually carry a fine or a sentence of 40 hours of community service, or both.
Skateboards can be bought online and in your local stores.  However, choosing a good skateboard can be challenging.  If you are a beginner there are a lot of things that you have to consider.  Aside from the cost, you should also check the entire board such as the wheels, the deck, the trucks, and others.  Here, we have compiled the best skateboards for sale that you can choose from right now.
Another bonus of shopping at an actual skate shop is that you get to see what the boards look like in person. Most skate shops will have a cool wall of boards, and it's fun to just stand there and look at all the graphics. If one jumps out and grabs you, then you can ask the shop owner about the brand, and whether it's a good one. There's nothing wrong at all with buying a skateboard deck because you like the graphics!

In this in-depth guide, we’re going to cover how to choose the best skateboard for beginners, and review the top five beginner skateboards on the market right now. We’ll talk about how to choose the right size, what parts of a skateboard you should pay attention to, how to choose the right shape, choosing the right wheels, and more. First, let’s talk about the top five skateboards for beginners.
Real Skateboards are also notable for the brand’s deep involvement in raising awareness and funds for charitable concerns related to the skateboard community across the globe with the brand supporting everything from DIY skatepark builds, to releasing bespoke Real boards for fallen members of the skateboarding community including releasing a board in memory of UK skate shop owner and stalwart of the British skate scene Steven ‘Bingo’ Binks back in 2011.
Powell Skateboards is one of the original skateboard companies who dates back to 1978 and who has consistently been a top skateboard brand. If you or someone you know skated in the 1980’s, chances are it was on a Powell skateboard. Though Powell had a short lived split between cofounders, George Powell and Stacy Peralta, they regrouped to produce “top of the line” skateboards under the Powell Classic name and succeeded in becoming one of the most successful skateboard companies. Something stuck through that split and they made the list for clear understanding of the fundamentals of a quality skateboard and easily became a perfect quality skateboard brand..
One European brand steady killing the game is France’s own Magenta. What Palace is for London, Magenta is for Paris, representing what it means to make do with skating in a place where you will literally get kicked out of everywhere just for riding on your board. With a recent collaboration with adidas, Magenta has shown they can turn their niche image into something with mass appeal, so long as the world will pay attention. Skateboarders already know the brand for their quick-footed style of skating and their unique illustration style, but they should know Magenta for their conscious effort to make sure we all are enjoying the pleasure and the freedom skateboarding brings.
^ Jump up to: a b c d e f "Skateboarding" (PDF). Pennsylvania Avenue National Historic Site Management Plan: Visitor Information, Education and Enjoyment. Washington, D.C.: National Mall and Memorial Parks: National Park Service: United States Department of the Interior. April 2014. pp. 24–25. Archived from the original (PDF) on March 4, 2017. Retrieved March 29, 2017. Skateboarding damages stonework, walls, steps, and sculpture in some areas and presents a persistent law enforcement and management challenge. Damaged areas include stone facing on memorials, benches, and other surfaces. Moreover, popular websites advertise the attractiveness of these areas for skateboarding, which indicates the large scope of this challenge. .... Actions: .... In park areas replace and maintain “No Skateboarding” signs that have been vandalized.
Polar’s inaugural video release, The Polar Skate Co. Promo – Wallride Oh Yeah Oh Yeah Oh Yeah (2012) with the tagline ‘Inspire others to inspire themselves’ featuring Pontus, fellow Swedes Oskar Rozenberg and Davd Stenstrom, Polish rider Michal Juras, Dane Hjalte Halberg, Tjark Thielker and original rider and Polar artistic contributor Jakke Ovgren.
Similar to sandpaper, grip tape, or “grip” as it’s commonly referred to, is applied to the top of your deck for traction. Grip gives you the friction you need to perform tricks such as ollies and kickflips. Not all grip tape is the same however. Each brand's products perform differently, so you may want to experiment with different brands to get a feel for what you prefer.

If you are looking for a skateboard that will provide you with all the necessary features you need to ride safely and efficiently, then the Punisher Butterfly Jive will be the perfect board for you. No matter if you want to give this skateboard to one of your kids or if you want it for yourself, it has the perfect size to fit just about anyone. This makes it very versatile, and is able to be used by nearly every age range.
Ever notice small vertical or horizontal cracks through your grip tape or by the hardware of your trucks?  These are called stress or pressure cracks and are basically mini fractures of your skateboard deck that typically are seen in the areas of the deck that withstand the greatest impact (around the trucks).  A few pressure cracks is generally no big deal and you won’t even notice them while skating, but they can compound and grow larger and make your deck lose “pop” and increase the chance of snapping.  To avoid pressure cracks, you cant use riser pads underneath your trucks to reduce the level of impact your deck takes.  You should also avoid over tightening your hardware and storing your skateboard in a very humid place as both of these practices can also make your board weaker and more susceptible to pressure cracks.
As your skateshop, we know that the list of skateboard and streetwear brands on the current market seems to be endless. To make it easier for you, we have the best and most famous European and American skateboard and skatewear brands at the skatedeluxe skateshop. Besides the biggest and best companies in the world, we also have a selection of smaller and uprising companies in stock that are worthy to represent your lifestyle.

Finally, consider the type of grip tape you'll want on the board. While function is important in this regard to give your feet ample support, there's nothing wrong with adding some bling to the board's surface either. Many skateboard retailers will offer you several choices of grip tape and board styles, so it's definitely important to ask a lot of questions.
Radiate Ride Good Skateboards are made of 7-ply maple construction with epoxy resin glue. It features 356A heat-treated cast aluminum high performance 5.0 trucks with grade 8 kingpins and axles. The super high rebound 99A PU wheels with grooved running surface provide better traction and abrasion resistance. The Abec 5 high precision speed bearings offer precision performance and a smooth ride. It has an 80 grit durable color matched grip tape with transparency. It is completely assembled and ready to go. This product has a 4.3 rating on Amazon.
It's really hard to continue with a small girls’ board brand when so many companies are now interested in the women's market. We feel like it's the right time to close down the brand and move on to the next chapter. Thanks to George and Juli Powell as well as Michael Furukawa for their vision and support of the brand and our mission over the last decade. Thanks to those who bought our products, our team riders, media, and to those that believed in what we were doing from the very beginning. I also want to thank Mimi Knoop who wore multiple hats over the years and was responsible for making hoopla a brand that was respected, legitimate, and one that we were proud to be a part of.
Following stints on the US brands Mad Circle and Arcade and a pro model on the then hugely popular European brand Cliche skateboards, Pontus Alv quit his board sponsor and moved back to his hometown of Malmo, Sweden in the early to mid 00’s. During this time Pontus took what might be called a creative hiatus but which would be more accurately explained as a re-connection with his roots. After returning to Malmo, Alv became heavily involved in building and creating the scene there, working alongside friends to build a number of DIY skatespots through the city such as the now legendary Savanna-side and Steppeside projects.
×