Destructo has some fancy skateboarding trucks. The Destructo raw series skate trucks come in low, medium and high designs and look oddly skinny. The Limited and Pro series trucks just look awesome, with simple pro signatures on the front and great color schemes. That's not to mention Destructo's "Rail Killer" series - these light trucks have extended baseplates to reduce wheelbite, and come in some incredible color schemes (including one using 24 karat gold!).
Remember, no skateboard lasts forever. Each board has different lifespan, regardless of the brand. Flip tends to break the easiest if you skate a lot. Almost and Girl boards usually have the longest life span. If you want a board that lasts really longer and you have the money, go for the Uber boards. Almost has three Uber boards signed by Mullen and usually start at $70 just for the deck, and completes range from $150-$250 just for the basic. If you want the perfect board, then you are talking a lot of money.

Ohderii Skate Skateboards are made of a High-quality Plastic deck which will not easily break even when pressed over by a car.  It comes with 3.125″ all aluminum alloy trucks, 59mm 78A super smooth PU wheels and ABEC-7 stainless steel bearings.  It is ready to use and you can easily store it in your backpack.  It has an average rating of 4.5 on Amazon.
As loosely defined as Bronze is, Peter Sidlauskus seems to be incapable of doing anything wrong in his marketing for the brand, endlessly putting out amazingly hilarious and gnarly New York based edits featuring a loose group of guys we can say make up their “team.” Bronze brings an aesthetic that falls somewhere between vaporwave and deepweb, and is always making gear that you can rock on the daily, from pink dad hats to coaches jackets. You might have even seen their flip of the Windows 98 logo on the backs of people like ASAP Nast.
Skateboards, along with other small-wheeled transportation such as in-line skates and scooters, suffer a safety problem: riders may easily be thrown from small cracks and outcroppings in pavement, especially where the cracks run across the direction of travel. Hitting such an irregularity is the major cause of falls and injuries.[102] The risk may be reduced at higher travel speeds.
In the early 1970s, Frank Nasworthy started to develop a skateboard wheel made of polyurethane, calling his company Cadillac Wheels.[7] Prior to this new material, skateboards wheels were metal or "clay" wheels. The improvement in traction and performance was so immense that from the wheel's release in 1972 the popularity of skateboarding started to rise rapidly again, causing companies to invest more in product development. Nasworthy commissioned artist Jim Evans to do a series of paintings promoting Cadillac Wheels, they were featured as ads and posters in the resurrected Skateboarder magazine, and proved immensely popular in promoting the new style of skateboarding.

Velocity Boards Retro Skateboards is a complete 22″ Banana Skateboard.  It includes 6″ Lightweight Aluminum Trucks, High-Speed ABEC-7 Bearings, High-Quality Wheels & Bushings and Hardware.  It has a Unique Textured Waffle Pattern on Deck and is designed for Maximum Grip.  The Deck measures about 22 x 6 x 4″.  It has a 6″ Truck Axle and a 3″ Truck Hanger.  It has a maximum weight capacity of  176 lbs. (80 kgs.).  It is great for all skaters who are 6 years old and above.  It has an Amazon rating of 4.7.


Well know for their creative cartoon graphics and high-quality deck construction, this Toy Machine complete is another great starting skateboard for beginners.  This deck is slightly larger than 8″ so it would be perfect for adults or people with larger feet who want a more stable ride.  This setup is another good example of generic parts with a pro quality deck for a very reasonable price.  A great option for a beginner who loves the logo and graphic, but wants to save money on the less important parts until they decide they want to take their skating the to next level.
i would recommend a deck size of 8.0 to 8.25 as for brand baker,girl,chocolate deathwish, its all preference the main difference between brands is the shape of the nose and tail. As for trucks i would go with independents or thunders. thunder have a quicker and more responsive turn while independents have a more delayed smooth turn. also thunders tend to wear away faster while independents don't. As for wheels go with 52mm or 54mm either spitefire formula fours of bones stf.
This period was fueled by skateboard companies that were run by skateboarders. The focus was initially on vert ramp skateboarding. The invention of the no-hands aerial (later known as the ollie) by Alan Gelfand in Florida in 1976,[39] and the almost parallel development of the grabbed aerial by George Orton and Tony Alva in California, made it possible for skaters to perform airs on vertical ramps. While this wave of skateboarding was sparked by commercialized vert ramp skating, a majority of people who skateboarded during this period didn't ride vert ramps. As most people could not afford to build vert ramps, or did not have access to nearby ramps, street skating increased in popularity.
While the skateboard has a lot of moving parts, one's safety, comfort, and ease to learn new skills and perform tricks are all of equal importance. For this reason, choosing the right type of deck and wheels should be two of the first considerations, as the board's shape, material construction, and wheel makeup will all have a significant impact on your ability to control the equipment and maintain good aerodynamics. Additionally, the width of the deck is important, so one must take their height, shoe size, and style of riding into account in order to ensure the deck offers as much support as possible, regardless of application.
Pro decks are what most people are familiar with and what is seen most commonly around skateparks and driveways around the US.  These decks can have a variety of different logos and images on them and sometimes are a specific professional skater’s pro deck.  Pro decks provide skaters a way to support their favorite riders and have the same equipment they see all their favorite pros using.  The quality of professional decks and parts are almost always very high as they have a reputable and brand image to uphold.  For this higher level of quality and you can expect to pay 2-3x the cost of a blank complete.  If you want to save some money and still have a pro look, there are options available that have generic blank parts with a pro deck.  This may be a good option for a beginner skater who is not yet doing complex tricks that may break these cheaper parts, but they still want the look and feel of a pro skateboard.  As the skater progresses they can then switch out these generic parts for higher-end options as necessary.

Before Zoo York, Supreme, and 5Boro, New York had SHUT. For a short while, SHUT ruled, but soon the business fell out and founder Rodney Smith left to start Zoo York with Eli Morgan Gesner (who drew the original SHUT logo), and Adam Schatz. SHUT went dormant while the three men grew Zoo York into a successful business, and when they sold it off to Ecko in 2006, SHUT was reborn. The brand's flagship store resides on New York City's Lower East Side, so you can go witness skateboard history in person any time you want.


Alex Olson’s Bianca Chandôn has quickly blurred and crossed back and forth between the line that currently divides high fashion and skateboarding, pushing an androgynous aesthetic inspired by looks found in Tom Bianchi’s Polaroid book Fire Island Pines, which nobody was ready for. Olson has turned what started off as an idea for a small board brand into a hype machine that has become a hit across the world.
A “razor tail” is the term for when the tail of the skateboard deck becomes sharpened and worn due regular use and scraping the tail of your skateboard on the ground to stop.  When your deck gets razor tail, its becomes a weapon against you and anyone need you while you’re skating as being hit with a sharpened tail is very painful.  To avoid this from happening, you could buy a carbon fiber deck that may be more resistant to wear, but more importantly you should not scrape your tail to stop.  Instead you can lightly place one foot or toe down to slow your speed or powerslide to a stop.

“As far as the actual look of the vast majority of contemporary graphics goes, I’d say that it feels to me as if something has been lost. It’s down to what you can do with modern heat transfer printing techniques – you can literally just take a photograph from the Internet and print it identically straight onto a skateboard. Speaking personally, there’s very little to challenge you there: either from the point of view of creating graphics, or from the consumer’s perspective. Whereas back when screen-printing was the norm, every time a graphic was produced the artist was physically cutting the key line out by hand. The key line is the final black line that forms the outline of whatever it is that you’re printing and ties in all the other colours together. You can see this in the early Sean Cliver graphics for example, where it’s clear that he has hand cut the key lines as precisely as he was able to, but looked at from today’s perspective they’re not perfectly precise, which is what gives Cliver’s earliest stuff its specific look in my opinion.”

For those of you who don't know, Mark Gonzales isn't just an artist who occasionally pens logos for Supreme. He's a bonafide legend, as an artist, a skater, and a personality. His brand Krooked is a perfect expression of that, with art direction from the man himself, and a videography of skate flicks that includes essential viewing Gnar Gnar, Kronichles, and Naughty. Supreme may top Krooked on this list, but true Gonz stans will always represent with Krooked.
However, the Golden Dragon does have pretty soft trucks bushings, which means the board will lean very easily and be more responsive to weight distribution. This is good news for more intermediate skaters who want easy turns, but not necessarily great for those who are still learning and may not be familiar with controlling a board. But for the price, and considering the great durability of all the other components, this is a quality choice.
Freedom Plaza has become a popular location for skateboarding, although the activity is illegal and has resulted in police actions.[5][115] A 2016 National Park Service management plan for the Historic Site states that skateboarding has damaged stonework, sculptures, walls, benches, steps, and other surfaces in some areas of the Plaza.[5] The management plan further states that skateboarding presents a persistent law enforcement and management challenge, as popular websites advertise the Plaza's attractiveness for the activity.[5] The plan notes that vandals have removed "No Skateboarding" signs and recommends the replacement of those signs.[5]
Manufacturers started to experiment with more exotic composites and metals, like fiberglass and aluminium, but the common skateboards were made of maple plywood. The skateboarders took advantage of the improved handling of their skateboards and started inventing new tricks. Skateboarders, most notably Ty Page, Bruce Logan, Bobby Piercy, Kevin Reed, and the Z-Boys started to skate the vertical walls of swimming pools that were left empty in the 1976 California drought. This started the "vert" trend in skateboarding. With increased control, vert skaters could skate faster and perform more dangerous tricks, such as slash grinds and frontside/backside airs. This caused liability concerns and increased insurance costs to skatepark owners, and the development (first by Norcon, then more successfully by Rector) of improved knee pads that had a hard sliding cap and strong strapping proved to be too-little-too-late. During this era, the "freestyle" movement in skateboarding began to splinter off and develop into a much more specialized discipline, characterized by the development of a wide assortment of flat-ground tricks.
The first thing to consider is what kind of skateboarding you want to do. Do you want to skate your local skate park and learn tricks? Do you want something for commuting across town or campus? Or, would you enjoy charging down hills at high speeds? Take a look at the options below and note which features work well for the type of skating you want to do.
Approximately two decades ago, a group of friends who were well versed in the world of skateboarding, set up their own brand; Plan B. Their knowledge and expertise helped them in setting up one of the best skateboard brands in the market with incredible gear. Not only does this Californian style skateboard company have the best-assembled skateboards, it is quite famous for its amazing decks. The customers of Plan B are literally head over heels for its amazing and durable decks. Plan B decks are made from thick 7 ply maple that gives it extra strength and minimal flexing.
Aaron "Jaws" Homoki Al Partanen ali boulala Alien Workshop almost Almost A Minute almost skateboards andrew reynolds Anthony Van Engelen Anti Hero Anti Hero Skateboards Antihero Arto Saari Atlantic Drift AVE Baker Skateboards bastien salabanzi Ben Kadow Ben Raemers Benson Birdhouse Birdhouse Skateboards black box distribution blind skateboards Bones bearings Bones Wheels Brandon Nguyen brian anderson Chris Haslam chris jones Chris Pfanner Chris Roberts cooper wilt creature skateboards Daan van der Linden daewon song Dan Cates David Gravette Death Skateboards deathwish Deluxe Distribution Denis Lynn Div Adam dustin dollin Dwindle Distribution Elijah Berle enjoi enjoi skateboards erik ellington fallen footwear Female skateboarding Flip Skateboards Frankie Spears Get Primitive Girl Skateboards grant taylor greg hunt heath kirchart Heroin Skateboards Hockey Skateboards Isle Skateboards jacob harris jamie thomas jason dill jeff grosso jenkem mag Jenkem Magazine Jerry Hsu jim greco Jim Phillips Jim Thiebaud Joey Guevara john cardiel Jordan Thackeray Josh Kalis julien stranger kenny anderson Korahn Gayle krooked skateboards Lacey Baker leo valls Lev Tanju Lewis Marnell Lizzie Armanto louie barletta lovenskate skateboards magenta skateboards malmo marc johnson Mark Appleyard Mark Gonzales matt pritchard Meow Skateboards mike carroll mike hill Milton Martinez Neil Blender Nick Jensen nick zorlac Nora Vasconcellos Ocean Howell Oskar Rosenberg Hallberg Palace Skateboards Paul Liliani paul rodriguez polar skate co pontus alv Powell Peralta powell peralta skateboards Primitive skateboards Real Skateboards rich smith Richie Jackson rick howard Rob Dyrdek Rodney Mullen Rowan Zorilla Sam Beckett Sammy Montano santa cruz santa cruz skateboards Shane Heyl Skateboard Café skateboards soy panday stu graham Stu lovenskate Smith Thaynan Costa The Cinematographer Project The National Skateboard Co tom harrison Tom Knox Tommy Guerrero tony hawk Tony Trujillo ty evans Vincent Alvarez Vivien Feil welcome skateboards willow Yaje Popson Youness Amrani yuri facchini Zack Wallin zero skateboards
SkatesZone.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, SkatesZone.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.
Harsh weather, cracked pavement, angry cops—all things that make Raw New England just so raw. The name is also an acronym for Ready Amongst Willing—a perfect moniker for one of the East Coast's toughest brands. Raw's product drops aren't quite as frequent or bountiful as some other brands on this list, but the decks, tees, hoodies, and caps with the bold RAW logo are must-haves for New England's skate crowd. Visit the brand's shops in Boston or in CT to get the goods in person.

Freedom Plaza has become a popular location for skateboarding, although the activity is illegal and has resulted in police actions.[5][115] A 2016 National Park Service management plan for the Historic Site states that skateboarding has damaged stonework, sculptures, walls, benches, steps, and other surfaces in some areas of the Plaza.[5] The management plan further states that skateboarding presents a persistent law enforcement and management challenge, as popular websites advertise the Plaza's attractiveness for the activity.[5] The plan notes that vandals have removed "No Skateboarding" signs and recommends the replacement of those signs.[5]
Skateboard hardware is used to connect the skateboard trucks to the skateboard deck. Skateboard hardware refers to the bolts and locknuts used when building a board. The bolts can have an Allen or Phillips head. Skateboard hardware comes in many different lengths, and often includes one different colored bolt so that the rider can mark the nose of their board.
Sizing plays an important role in the performance of any deck. A large majority range in size from 7.75" to 8.5" in width. These will provide a great platform for shredding any obstacle and will excel in street and skatepark environments alike. For those who prefer a smaller board, decks are offered down to 7.5" in width- benefiting people with smaller feet or the technical skater. Conversely, those looking for a wider board will enjoy our selection ranging up to 8.9" wide. Larger decks will accommodate those with very large feet, as well as offer an amazing experience for cruising and shredding large ramps and transitions.
A cruiser board is just that, a board that’s ideal for cruising across town. Cruiser boards have kicktails and are usually about the same size as “popsicle” decks, but with more variety in shapes. Cruisers are ideal for getting around because they are lighter and more nimble than larger longboards, allowing you to bob and weave through urban obstacles. Uniquely shaped cruiser decks have also become popular for transition skating because they add style and flavor without having a strong affect on the way the board skates.
Hi Everyone! My name is Pete (yes, I’m a real person who lives in a cornfield just outside of Buffalo, NY – well, my house is in the middle of a cornfield!). As a former collegiate athlete in Iowa, I’ve played varsity basketball, volleyball and soccer. I also happen to be an outdoor adventure fanatic who’ll do whatever it takes to never miss my annual week-long wilderness canoe trip in the Northern Ontario wilderness. Sports equipment has come a long way over just the past few years, and I’d love to share with you the latest (and most competitively priced) products that will save you many of the frustrations I’ve dealt with over the years! Please feel free to cruise the site and drop me a line on the contact page if you have ideas for improvements or anything else!

Minority Maple Skateboard is an aesthetically engineered, quality starter skateboard. It is solid to the core. It is made with 7-ply hard rock maple cold pressed into 32×8-inch deck. It is built to endure weight up to 220 lbs. Its mediate concave design makes it perfect for performing tricks with ease and dexterity. Its 5-inch long trucks made with genuine aluminum alloy makes it an epitome of strength and endurance. Its carbon steel kingpin and 78A high rebound PU bushing adds to its strength. ABEC-9 precision bearings are manufactured using chrome steel with 52mm 102A PU wheels making the Minority Maple Skateboard a speedster.
Obviously, price is an important consideration for most people when looking to buy anything.  For skateboards, the price of the board is generally a good indicator of quality.  In general, most pro branded skateboards that are made up of high-quality parts are in the $70-$100 range.  You can usually find pro branded decks with average parts for $50-$70, and you can find blank options between $25-$50.  I wouldn’t touch anything under $25, as it is likely poor quality and very prone to breakage.
This past year, they dropped the insant classic VHS series of decks, playing off of the nostalgia of old blank VHS tapes used to film back in the 90’s, creating a high demand for restocks in skate shops across the world. This series almost singlehandedly brought them back in the forefront of skating to the world beyond New York, and we can only wait to see what they’ll do next.
Omar Salazar suffered a bad knee injury recently and was sidelined from skating, allowing him to refocus his energy into running his company, Doomsayers. Following the demise of Alien Workshop and facing an uncertain future in the industry, Omar decided to really focus on a brand whose image is not shy about its disdain for corporate greed, which many people blame for the demise of his long time sponsor.
Lovenskate have produced a number of full-length videos throughout the 16 years of their existence, including the 2015 release Lovenskate – Smorgas’board although more recently they have followed the direction of skate media in general and concentrated on releasing shorter, rider-specific clips such as Jordan Thackeray’s Welcome clip and more recently the Batch Capture series.
Decks come in a variety of shapes and sizes. You can choose a mini-board, a cruiser, a drop-through, or a standard deck for your favorite set of wheels and hardware. Widths range too from a few inches with a 22-inch board to the wide size of a true cruiser. Some decks are flat as possible while others are significantly concave for optimized turning. You can buy a deck with artwork and grip tape already attached for a quick install or you can get a bare-bones wooden deck to truly customize.
×