Modern decks are made with a composite of thin layers of either maple or bamboo pressed into a near symmetrical shape with a nose equal to or longer than the tail. The deck should be concave (subtle U shape) along the whole board with both the nose and tail angled upwards (the "kick" of the board). Conceptually while the skateboard is a platform, it also serves to cup the balls of the skater’s feet with rising sides, nose and tail providing the foundation for pretty much all modern skateboard tricks.
Fury skateboarding trucks are heavier and stronger than most. Most skateboarders try to shave off as much weight as possible. However, Fury has some other special features to try to tempt you - Fury trucks are wider than most, come with a mini riser (similar to Phantom trucks), and special Fury bushings. And if that's not enough, Fury trucks have a unique ballpoint turning design, so that the hangar has a ball joint sitting in a socket in the base plate.
Amazing! Great pop and amazing concave. Last for a long time as long as you don't get the bamboo board. They have an earthy style like element, but with a better board quality. The only reason they are not #1 is because they aren't as well known. You cannot snap these boards! I have skated them for a couple of years because they are so good. BUY ELEMENT BOARDS! You wont regret it.
Jump up ^ Williamson, Elizabeth (October 11, 2013). "Skateboarders See a (Kick) Flip Side to the Government Closing: With Washington Plazas Empty and Patrols Down, a Banned Sport Is Suddenly On" (video). The Wall Street Journal, U.S. Edition. Retrieved March 30, 2017. One positive thing about the gov't shutdown – spots at gov't buildings are now skateable – Darren Harper, Pro Skateboarder, via Facebook.
Prior to the mid-seventies many early skateboards were originally based upon the concept of “Sidewalk Surfing” and were tied to the surf culture, skateboards were surfboard like in appearance with little to no graphics located under the bottom of the skateboard-deck. Some of the early manufactured skateboards such as "Roller Derby", the "Duraflex Surfer" and the "Banana board" are characteristic. Some skateboards during that time were manufactured with company logo's or stickers across the top of the deck of the skateboard, as griptape was not initially used for construction. But as skateboarding progressed & evolved, and as artist began to design and add influence to the artwork of skateboards, designs and themes began to change.
The Powell Golden Dragon 2 Skateboard is an affordable and complete skateboard for the beginners and also for the advanced skaters. It has high-rebound, hand-cast polyurethane wheels to give you a great roll and grip. It measures 7.5 inches wide with a colorful screen-printed bottom. It is made in China and has an average rating of 4.2 on Amazon.
This board is an excellent option for beginners because of its simplicity and durability. The lightly concave design allows for simple turns but doesn’t require the rider to be an excellent navigator. You can start off riding this deck down the street and use it as you learn ollies, kickflips, and how to drop in to a half pipe. It will withstand it all and look good doing it.
Many cities also began implementing recreation plans and statutes during this time period, as part of their vision for local parks and communities to make public lands more available, in particular, for skateboarding, inviting skateboarders to come in off of the city streets and into organized skateboarding activity areas. By 2006 there were over 2,400 skateparks worldwide and the design of skateparks themselves had made a transition, as skaters turned designers. Many new places to skateboard designed specifically for street skaters, such as the "Safe Spot Skate Spot" program, first initiated by professional skateboarder Rob Dyrdek throughout many cities, allowed for the creation of smaller alternative safe skate plazas to be built at a lower cost. One of the largest locations ever built to skateboard in the world, SMP Skatepark in China, at 12,000 square meters in size, was built complete with a 5,000-seat stadium.
Unlike some deck options, which are completely bare, the Bamboo Skateboards Galaxy Series Cosmic Cloud Skateboard Deck features heat-stamped artwork on the underside of the board, including several geometric and interstellar designs, including a beautiful nebula. Bamboo Skateboards claims these boards last their customers three weeks longer than other decks. They come in three sizes: 7.75-by-31.5-inches, 8-by-31.75-inches, and 8.25-by-32-inches.
Manufacturers started to experiment with more exotic composites and metals, like fiberglass and aluminium, but the common skateboards were made of maple plywood. The skateboarders took advantage of the improved handling of their skateboards and started inventing new tricks. Skateboarders, most notably Ty Page, Bruce Logan, Bobby Piercy, Kevin Reed, and the Z-Boys started to skate the vertical walls of swimming pools that were left empty in the 1976 California drought. This started the "vert" trend in skateboarding. With increased control, vert skaters could skate faster and perform more dangerous tricks, such as slash grinds and frontside/backside airs. This caused liability concerns and increased insurance costs to skatepark owners, and the development (first by Norcon, then more successfully by Rector) of improved knee pads that had a hard sliding cap and strong strapping proved to be too-little-too-late. During this era, the "freestyle" movement in skateboarding began to splinter off and develop into a much more specialized discipline, characterized by the development of a wide assortment of flat-ground tricks.
Read on for our complete skateboard buyers guide where you can find things to consider when buying a beginner board, beginner skateboards for adults, ABEC ratings, Sizing Chart, and more about these epic extreme sports. Looking to go electric? Check our our review of the top electric skateboards! You could also try these top-rated electric longboards.
This brand gets its name from a slang term for strip club. One video was called “Chicken Bone Nowison,” and it opens with a scene of skater pummeling a security guard. Is that not awesome enough? If there is a company that embodies a more perfect IDGAF attitude in skateboarding, please let me know. For the homies, by the homies is their mantra, which is pretty cool with a team comprised of rippers like Theotis Beasley, Andrew Reynolds, Dustin Dollin, Jim Greco, Terry Kennedy, Lizard King… The list goes on.
Silver has edged it's way onto the scene offering nice, quality skateboard trucks, with plenty of little extras to make their trucks stand out from the rest. With things like inverted kingpins and axle caps, Silver trucks are pushing their motto, "Strength with Style." Silver trucks do look nice! Silver also sports a great team, with guys like Sheckler, Dyrdek, Rodriquez and more.
Following Jason Dill and AVE leaving long time sponsors Alien Workshop back in 2013, Dill’s 13-year-old Fucking Awesome brand, which was formerly a clothing brand, became a board brand and began to add riders such as Dylan Rieder (RIP), Gino Iannucci, Jason Dill, Kevin Bradley, Nakel Smith, Sean Pablo, Sage Elsesser, Tyshawn Jones and Aiden Mackey.
Pro decks are what most people are familiar with and what is seen most commonly around skateparks and driveways around the US. These decks can have a variety of different logos and images on them and sometimes are a specific professional skater’s pro deck. Pro decks provide skaters a way to support their favorite riders and have the same equipment they see all their favorite pros using. The quality of professional decks and parts are almost always very high as they have a reputable and brand image to uphold. For this higher level of quality and you can expect to pay 2-3x the cost of a blank complete. If you want to save some money and still have a pro look, there are options available that have generic blank parts with a pro deck. This may be a good option for a beginner skater who is not yet doing complex tricks that may break these cheaper parts, but they still want the look and feel of a pro skateboard. As the skater progresses they can then switch out these generic parts for higher-end options as necessary.
Quality wheels won’t mean much if you don’t have nice bearings which allow the wheels to spin freely on the axle of the skateboard truck. A quality set of bearings will spin well right away and actually get even better once broken in a bit. If quality bearings get dirty, they can typically be taken apart and cleaned relatively easily. A good set of bearings typically runs between $10 - $16.
Hi Everyone! My name is Pete (yes, I’m a real person who lives in a cornfield just outside of Buffalo, NY – well, my house is in the middle of a cornfield!). As a former collegiate athlete in Iowa, I’ve played varsity basketball, volleyball and soccer. I also happen to be an outdoor adventure fanatic who’ll do whatever it takes to never miss my annual week-long wilderness canoe trip in the Northern Ontario wilderness. Sports equipment has come a long way over just the past few years, and I’d love to share with you the latest (and most competitively priced) products that will save you many of the frustrations I’ve dealt with over the years! Please feel free to cruise the site and drop me a line on the contact page if you have ideas for improvements or anything else!