It was a slow start for 3D, who had Alex Olson bail on them when they first started out before they could even get their first run of boards inside of shops, leaving the company at just two riders: Brian Anderson and Austyn Gillette. Now, due at least partially in part to Brian Anderson’s solidified status as a skateboarding legend, 3D has taken off and become an established brand that’s not taking itself too seriously, but still putting on for skateboarding. 3Ds first video offering, featuring amateur rider Tom Karangolov in a dreamy pink colorcast world, has even showed that they’re looking to shake things up in the stale footage side of skateboarding.
Without good grip tape, skaters have a tough time staying on top of their board. The main complaints about poor grip tape tend to be that it was never very grippy or lost its grip really quickly. Once again, we recommend trusting in name brands with years of experience supporting skateboarders. Unfortunately, if you are buying a pre-made complete skateboard, you probably won't have access to the brand name of the grip. 
Quality wheels won’t mean much if you don’t have nice bearings which allow the wheels to spin freely on the axle of the skateboard truck. A quality set of bearings will spin well right away and actually get even better once broken in a bit. If quality bearings get dirty, they can typically be taken apart and cleaned relatively easily. A good set of bearings typically runs between $10 - $16.

Pro decks are what most people are familiar with and what is seen most commonly around skateparks and driveways around the US.  These decks can have a variety of different logos and images on them and sometimes are a specific professional skater’s pro deck.  Pro decks provide skaters a way to support their favorite riders and have the same equipment they see all their favorite pros using.  The quality of professional decks and parts are almost always very high as they have a reputable and brand image to uphold.  For this higher level of quality and you can expect to pay 2-3x the cost of a blank complete.  If you want to save some money and still have a pro look, there are options available that have generic blank parts with a pro deck.  This may be a good option for a beginner skater who is not yet doing complex tricks that may break these cheaper parts, but they still want the look and feel of a pro skateboard.  As the skater progresses they can then switch out these generic parts for higher-end options as necessary.


Hey, are you looking to have a great fun with a fantastic ride? If YES, then skateboard will be the best option for you by all means to actualize all of your dreams. Skateboarding is an effective form of physical exercise as well as it saves your money also when you use it for going to your near destination on a busy road. Therefore, if skateboarding is your passion and if you are looking for the best skateboards, then with this in mind you are in the right place, my dear.
There were several artistic skateboarding pioneers that had an influence on the culture of skateboarding during the 1980s, that transformed skateboard-deck art like Jim Phillips, whose edgy comic-book style "Screaming Hand", not only became the main logo for Santa Cruz Skateboards, but eventually transcended into tattoos of the same image for thousands of people and vinyl collectible figurines over the years.[93][94][95] Artist Vernon Courtlandt Johnson is said to have used his artwork of skeletons and skulls, for Powell Peralta, during the same time that the music genres of punk rock and new wave music were beginning to mesh with the culture of skateboarding.[8][96][97] Some other notable skateboard artists that made contribrutions to the culture of skateboarding also include Andy Jenkins, Todd Bratrud, Neil Blender, Marc McKee, Tod Swank, Mark Gonzales, Lance Mountain, Natas Kaupas and Jim Evans.[98][99]
You’re just looking for a quality skateboard to buy for a beginner (either you or someone you know), but you have no idea where to start.  You see bearings, hardware, wheels, decks, and trucks being advertised but don’t want to spend hours researching which individual part to buy.  This is how I felt when I was first looking to but a complete skateboard for my nephew for Christmas many years ago. I wanted something that he would love, but also that was safe and would not break the bank.  After researching and making a decision I thought it would be useful to share this information with others who may be in a similar situation.
Prior to the mid-seventies many early skateboards were originally based upon the concept of “Sidewalk Surfing” and were tied to the surf culture, skateboards were surfboard like in appearance with little to no graphics located under the bottom of the skateboard-deck. Some of the early manufactured skateboards such as "Roller Derby", the "Duraflex Surfer" and the "Banana board" are characteristic. Some skateboards during that time were manufactured with company logo's or stickers across the top of the deck of the skateboard, as griptape was not initially used for construction. But as skateboarding progressed & evolved, and as artist began to design and add influence to the artwork of skateboards, designs and themes began to change.[92]
The promo was followed in late 2012 by another Polar Skate Co. Promo – No complies & wallrides & shuvits again filmed in and around Malmo, Sweden as well as Copenhagen, Denmark, New York and London, featuring skaters who appeared in the original promo, plus new addition and former Uk-born Blueprint skater Jerome Campbell and New York based Aaron Herrington who would go on to turn pro for Polar.
However, this same company decided to ‘Cash-in’ on THE NAME BRAND, and now con-currently sells JUNK , made in China, at WAL MART. DO NOT BUY any ‘longboard’ they sell that has plastic trucks!! They are an accident awaiting a place to occur. I’ve seen wheels (from a company that prided itself on ‘the best wheels’) that are upwards of 4 mm out-of-round, which could easily cause speed-wobbles, even at pedestrian speeds. From my POV, they’ve opened themselves up to possibly numerous lawsuits, just because of the inferior quality, and poor design choices made in order to maximize profit.
Emerging initially via a series of spoof news bulletins created by Lev Tanju called ‘PWBC Global Skateboard News‘ and hosted on the don’twatchthat.tv site, the aesthetic that the Palace Skateboards Brand would adopt was firmly established in these early videos. Sadly now mostly deleted from the Internet, aside from a few ‘best of’ videos, the PWBC News series were a pre-cursor for the route that the brand would adopt with its comedic take on the faux-seriousness of the Skateboard Industry of the time, an emphasis on the UK grime music scene, and the introduction of numerous characters within each news segment, including Francis Shower Face who still appears in Palace releases to this day, along with snippets of footage from various sources.
Want the same great performance and high-quality construction as a name brand deck but don’t have a large budget?  Blank decks are your answer. Depending on the brand, blank decks can be similar or better than pro decks and are available in just as many or more shape options.  These decks are perfect for people who love skating and don’t really care about supporting a profession or the graphic on their deck.  Blanks are also great for aggressive skaters who go through decks quickly as many blank skateboard decks are sold in bulk packs of 3, 5, or even 10 decks per pack.
SkateXS has custom skateboards for kids of every young age. From ages 5-7 we have skateboards sizes 7” x 28”. For kids between the ages of 8-10 we have skateboards sized between 7.25” x 29”. These are the perfect sizes for young kids, since it helps them feel less overwhelmed by the board. It also helps provide them with a board that is ideal to their side, encouraging safe cruising and skateboard tricks.
Remember the cool skate kids wearing Workshop tees in the '90s? Well you don't see too many of those these days, but AW is still one of the best “big” skate brands going. The team alone—featuring Supreme muse Jason Dill, tech-gnar wizard Anthony Van Engelen, and the most handsome guy on a board, Dylan Rieder—puts the brand in the top 10. And even though you might not associate legacy riders like Rob Dyrdek with anything cool at all, he pulled one of the most boss moves in all skate business history when he bought the brand that first sponsored him 20 years ago back from Burton (who bought the brand from Chris Carter in 2008) last year, so Workshop is once again skater-owned.
Unlike California, where the sun always shines and the pavement has never seen snow and salt, New York only has a handful of skate brands. Funny when you think about the rich history skateboarding has in the City. 5Boro is one of the brands that has been keeping the tradition alive for more than a decade, and next time you see founder Steve Rodriguez out skating, thank him for making so much happen for skaters in NYC.
In the early 1970s, Frank Nasworthy started to develop a skateboard wheel made of polyurethane, calling his company Cadillac Wheels.[7] Prior to this new material, skateboards wheels were metal or "clay" wheels. The improvement in traction and performance was so immense that from the wheel's release in 1972 the popularity of skateboarding started to rise rapidly again, causing companies to invest more in product development. Nasworthy commissioned artist Jim Evans to do a series of paintings promoting Cadillac Wheels, they were featured as ads and posters in the resurrected Skateboarder magazine, and proved immensely popular in promoting the new style of skateboarding.
The smaller the wheel diameter, the easier it is to do tricks, because it makes the board sit closer to the ground. But beginners will definitely have an easier time controlling a board with larger diameter wheels. Think of the larger wheels as being akin to training wheels. If you don’t want your board to have “pop” as you are learning, you can choose softer wheels, all the way down to a 73a. They won’t let you go as fast, and you’ll have to push off more often, but they do make it more likely that your board will stay on the ground.
After numerous tour-based releases and the epic Lakai footwear video ‘Fully Flared‘ (2007), Girl Skateboard’s last (to date) full-length company release came in the form of ‘Pretty Sweet‘ (2012) which, aside from showcasing ground-breaking skateboarding, also set a new standard in terms of production values with Ty Evans employing cinematic camera technologies to capture the skateboarding, as well as the skits.
The fact that it has nice and attractive prints also makes it a fashion skateboard. You can use it to show not only your passion in the sport but also your fashion sense. It is also equipped with a high-density emery surface known for being both waterproof and non-slip. With that, you have a hundred percent assurance of your safety when you are riding on it.
The magazine only lasted four issues, but resumed publication as Skateboarder in 1975.[16][17][18] The first broadcast of an actual skateboarding competition was the 1965 National Skateboarding Championships, which were held in Anaheim, California and aired on ABC’s “Wide World of Sports.[19][20] Because skateboarding was a new sport during this time, there were only two original disciplines during competitions: flatland freestyle and slalom downhill racing.[6]
Individuality and a self-expressed casual style have always been cultural values for skateboarders, as uniforms and jerseys are not typically worn.[88] This type of personal style for skateboarders is often reflected in the graphical designs illustrated on the bottom of the deck of skateboards, since its initial conception in the mid seventies, when Wes Humpston and Jim Muri first began doing design work for Dogtown Skateboards out of their garage by hand, creating the very first iconic skateboard-deck art with the design of the "Dogtown Cross".[89][90][91]
Peralta put together the Powell skate team under the Bones Brigade moniker, employed the services of photographer, artist and visionary C R Stecyk III and was the talent scout responsible for bringing skaters such as Tony Hawk, Rodney Mullen, Lance Mountain, Mike Vallely, Guy Mariano, Tommy Guerreo and inventor of the ollie Alan ‘Ollie’ Gelfand, (amongst many others) to the attention of the global skateboard community.
The skateboarding industry has changed so much in the last few years. Female skaters now get the support they need from bigger companies. I know hoopla helped pave the way for this to happen. It was so rewarding and surreal to have had such a rad team of girls represent hoopla over the years. I am stoked to have formed friendships with such a diverse and talented group.
Even if the Rodriguez ‘One Way’ deck from Primitive suggests otherwise, there is only one direction for P-Rod: up! This is not only proved by the rocket launch of his brand into the top 16 at skatedeluxe but also by himself while being on board. Besides, neat graphics, high-quality materials and the perfect concave should convince you as well. Your new primitive deck costs 74.99 € | 60.00 GBP!
Skateboarding has become a very popular means of transport over the years. Skateboards are great, no matter if you’re a student looking for a product to help you get around, a mother of two or just a skateboarding enthusiast. Getting around can be tricky, especially if your city is packed with traffic and fumes, and you don’t want to add to the problem. If you don’t mind cruising on the side of a pavement or a relatively clean road, skateboards can be a great way to have some fun and experience a new hobby.
i would recommend a deck size of 8.0 to 8.25 as for brand baker,girl,chocolate deathwish, its all preference the main difference between brands is the shape of the nose and tail. As for trucks i would go with independents or thunders. thunder have a quicker and more responsive turn while independents have a more delayed smooth turn. also thunders tend to wear away faster while independents don't. As for wheels go with 52mm or 54mm either spitefire formula fours of bones stf.
As the only female-focused and female-owned skateboard brand on this list, Meow Skateboards is notable for boldly stepping into the male-dominated skateboard industry and succeeding where other similar projects have failed. Prior to establishing the Meow Skateboard Brand, Lisa Whitaker was already a driving force within female skateboarding as the founder of the largest online resource for female skateboarding in the world – Girls Skate Network.
Alex Olson’s Bianca Chandôn has quickly blurred and crossed back and forth between the line that currently divides high fashion and skateboarding, pushing an androgynous aesthetic inspired by looks found in Tom Bianchi’s Polaroid book Fire Island Pines, which nobody was ready for. Olson has turned what started off as an idea for a small board brand into a hype machine that has become a hit across the world.
Regardless of your skating ability or style, CCS is the definitive place for the best skateboard decks around. With hundreds in stock, take your pick from some of the sickest decks available! Alien Workshop, Baker, Deathwish, Element, enjoi, Girl, Welcome. WKND, Santa Cruz, Primitive, and Real are among the most popular offered. Additionally, notable brands such as Almost, DGK, Flip, Krooked, Alien Workshop, Skate Mental, Zero, Creature, and Chocolate are available for all your skating needs.
SkateXS has custom skateboards for kids of every young age. From ages 5-7 we have skateboards sizes 7” x 28”. For kids between the ages of 8-10 we have skateboards sized between 7.25” x 29”. These are the perfect sizes for young kids, since it helps them feel less overwhelmed by the board. It also helps provide them with a board that is ideal to their side, encouraging safe cruising and skateboard tricks.
Last year, Element didn’t even make it to the top 3, but in 2016 it reached the top and therefore is our top skateboard deck brand on skatedeluxe! We can only congratulate! Even after 24 years the old hand of the skateboarding industry, which was founded in 1992, does not forget how to provide you with decks that push tears of joy out of your feet. What to expect for 2017? A big anniversary! Can’t wait for that! Get your new Element deck from skatedeluxe starting at 59.99 €| 50.00 GBP!
The Quest Super Cruiser is made of Canadian Maple and measures 31″(787mm)x8″(203mm). It has a maximum capacity of 500 lbs. The wheels have a size of 1.99″(50mm)x1.42″(36mm) Pu with logo printing. The pattern is heat transferred. The trucks are 5″ heavy duty aluminum alloy. This skateboard can provide you a high-quality ride with an entry-level price. This is the best skateboard for both beginners and price-conscious expert skaters. It has an average rating of 4.3 on Amazon.
There is one question that one or another might have had in mind before: What is the best skateboard deck brand? Unfortunately, we don’t have a satisfying answer. But we did our very best and moved mountains by coming up with a very complex formula that takes sold decks, brand shop visits, search queries and lots of other fripperies into consideration to display a list of your favourite skateboard brands of 2017.
Bearings are very important if you want to keep rolling without pushing constantly, especially while street skating. They're typically rated with the ABEC (Annular Bearing Engineering Committee) scale. The ABEC scale only measures the precision of the bearing, not how well it rolls or how long it lasts. It's a common misconception that the ABEC scale refers to how fast the bearing rolls. Anything above 1 is precision and will perform fine for skateboarding, but it's recommended to go above a 3.
Over the years skateboard-deck art has continued to influence and expand the culture of skateboarding, as many people began collecting skateboards based on their artistic value and nostalgia. Productions of limited editions with particular designs and types of collectible prints that can be hung on the wall, have been created by such famous artist as Andy Warhol and Keith Haring. Most professional skateboarders today have their own signature skateboard decks, with their favorite artistic designs printed on them using computer graphics.[100][101]
FTC was cool before there were skate and hype blogs around to tell you that they were cool. Mastermind Kent Uyehara built his brand from the back of a sporting goods shop into an international symbol of cool, with franchise locations in Sacramento, Tokyo, and Barcelona. FTC isn't just the go-to spot for skate gear in those cities-it's a full-blown brand that any skater would be proud to wear.
Since its inception in 1990, Alien Workshop has gone through a number of changes of ownership, first being bought by Burton Snowboards in February 2008, then purchased from Burton by original Alien Workshop rider and reality TV show star Rob Dyrdek in January 2012. Following Dyrdek’s purchase of the brand and its umbrella company DNA Distribution, (also incorporating Habitat skateboards, Habitat footwear and Reflex bearings), an announcement was made in October of 2013 that Dyrdek would remain as a minority shareholder of DNA Dist, with the majority of shares purchased by Pacific Vector Holdings, (also owners of No Fear clothing and Gatorz sunglasses).
×